D-Link DES-6505 Bruksanvisning
D-Link
Audio/video-omvandlare
DES-6505
Läs gratis den bruksanvisning för D-Link DES-6505 (13 sidor) i kategorin Audio/video-omvandlare. Guiden har ansetts hjälpsam av 23 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 12 recensioner. Har du en fråga om D-Link DES-6505 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/13
Introduction
This Quick Installation Guide gives step-by-step
instructions for installing modules in the D-Link
DES-6500 Modular Ethernet Switch. This switch is
used to connect an entire department to your
Ethernet backbone. For more detailed information
about the switch, its components, making network
connections, configuration and technical
specifications, please refer to the User’s Guide
included in Adobe Acrobat format on the CD-ROM
that was included with the switch.
Step 1 – Unpacking
Please ensure your box contents included:
One switch networking module
This Quick Installation Guide
Step 2 - Hardware Installation
The DES-6500 ships as a base unit which includes:
DES-6501 Backplane Chassis –
provides electrical power to and conveys
transmissions between modules
DES-6502 CPU Module – Switching and
management module located in the
uppermost slot
DES-6511 Redundant Power Supply
Module – located in one of the two large
slots at the bottom of the switch
Networking modules sold separately include:
DES-6502 CPU module
DES-6504 12-port 100BASE-FX SFF Fast
Ethernet Switch module
DES-6505 8-port 1000BASE-SX SC
Gigabit Ethernet Switch module
DES-6506 24-port RJ45 Patch Panel
module
DES-6507 12-port 1000BASE-T + 2-port
Combo SFP slot Gigabit Ethernet Switch
module
DES-6508 16-port
10BASE-T/100BASE-TX (RJ45) Fast
Ethernet Switch module
DES-6509 12-port Mini GBIC Gigabit
Ethernet Switch module
DES-6510 24-port 10/100 RJ21Switch
module
DES-6511 Redundant Power Supply
module
Carefully follow the procedures defined below to
install modules in the switch. Networking modules
can be installed in any unused slot with the
exception of the DES-6502 CPU module which must
be installed in the uppermost slot (only).
1. Remove a blank slot cover.
2. Carefully slide a module into the slot, making
sure that its sides are inside the guide rails.
3. When the module reaches the back of the chassis,
push gently but firmly to connect the rear
sockets of the module to the backplane. Ensure
that the module is completely inserted into the
chassis such that its front panel is flush with the
front panel of the chassis.
4. Tighten the two large module screws to ensure
that the module is held firmly in place.
Note: Networking modules are hot-swappable,
meaning they can be added and removed while power
to the switch is ON. The CPU module however, is
NOT hot-swappable. Removing or inserting the CPU
module while the power is on may cause irreparable
damage to the module and/or to the switch itself.
Further, make sure you have unplugged the power
cord from the removable power supply module before
inserting or removing it from the switch.
Produktspecifikationer
| Varumärke: | D-Link |
| Kategori: | Audio/video-omvandlare |
| Modell: | DES-6505 |
Behöver du hjälp?
Om du behöver hjälp med D-Link DES-6505 ställ en fråga nedan och andra användare kommer att svara dig
Audio/video-omvandlare D-Link Manualer
13 Januari 2025
6 Januari 2025
6 Januari 2025
24 December 2024
23 Oktober 2024
21 Oktober 2024
23 September 2024
24 Augusti 2024
9 Augusti 2024
31 Juli 2024
Audio/video-omvandlare Manualer
- INOGENI
- TP Link
- ShieldRock
- JL Audio
- CYP
- Nedis
- Trendnet
- Sescom
- Pioneer
- Mean Well
- A-NeuVideo
- GEM
- Sabrent
- VigilLink
- Recom
Nyaste Audio/video-omvandlare Manualer
7 April 2025
3 April 2025
2 April 2025
2 April 2025
1 April 2025
1 April 2025
1 April 2025
29 Mars 2025
29 Mars 2025
26 Mars 2025