Dahua Technology DHI-VTO2111D-WP-S Bruksanvisning

Dahua Technology Intercomsystem DHI-VTO2111D-WP-S

Läs gratis den bruksanvisning för Dahua Technology DHI-VTO2111D-WP-S (42 sidor) i kategorin Intercomsystem. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 7.5 recensioner. Har du en fråga om Dahua Technology DHI-VTO2111D-WP-S eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/42
VTO Series
Users Manual
Dahua Technology Co., Ltd
I
Foreword
General
This manual offers reference material and general information about the basic operation,
maintenance, and troubleshooting for a Dahua . Read, follow, and retain the security device
following safety instructions. Heed all warning on the unit and in the operating instructions
before operating the unit. Keep this guide for future reference.
Safety Instructions
The following categorized signal words with defined meaning might appear in the Guide.
Signal Words
Meaning
WARNING
Indicates a medium or low potential hazard which, if not
avoided, could result in slight or moderate injury.
CAUTION
Indicates a potential risk which, if not avoided, could result in
property damage, data loss, lower performance, or
unpredictable result.
NOTE Provides additional information as the emphasis and
supplement to the text.
Revision History
No.
Version
Revision Content
Release Time
1 V1.0.0 First Release January. 9 201
2 V1.0.1 Revised for North America July 2019
Privacy Protection Notice
As the device user or data controller, you may collect personal data such as face images,
fingerprints, license plate number, email address, phone number, GPS location and other
sensitive or private information. You must ensure that your organization is in compliance with
local privacy protection laws and regulations to protect the legitimate rights and interests of
other people by implementing measures include but not limited to: providing clear and visible
identification to inform data subject the existence of surveillance area and providing related
contact
About the Guide
This user guide has been compiled with great care and the information it contains has
been thoroughly reviewed and verified.
The text was complete and correct at the time of printing. This guide may be periodically
updated to reflect changes to the product or to correct previous information and the
content of this guide can change without notice.
If you encounter an error or have any questions regarding the contents of this guide,
contact customer service for the latest documentation and supplementary information.
II
Dahua accepts no liability for damage resulting directly or indirectly from faults,
incompleteness, or discrepancies between this guide and the product described. Dahua is
not liable for any loss caused by installation, operation, or maintenance inconsistent with
the information in this guide.
All the designs and software are subject to change without prior written notice. The
product updates may cause some differences between the actual product and the Guide.
Please contact the customer service for the latest program and supplementary
documentation.
Video loss is inherent to all digital surveillance and recording devices; therefore Dahua
cannot be held liable for any damage that results from missing video information. To
minimize the occurrence of lost digital information, Dahua recommends multiple,
redundant recording systems, and adoption of backup procedure for all data.
All trademarks, registered trademarks and the company names in the are the Guide
properties of their respective owners.
Please visit our website, contact the supplier or customer service if there is any problem
occurred when using the device.
Contact the supplier or customer service if you encounter any issue while using this unit.
III
Important Safeguards and Warnings
This chapter describes the contents covering proper handling of the device, hazard prevention,
and prevention of property damage. Read these contents carefully before using the device,
comply with them when using, and keep it well for future reference.
Installation and Maintenance Professionals Requirements
All installation and maintenance professionals must have adequate qualifications or
experiences to install and maintain CCTV systems and electric apparatus to work , and
above the ground. The professionals must have the following knowledge and operation
skills:
Basic knowledge and installation of CCTV systems.
Basic knowledge and operation skills of low voltage wiring and low voltage electronic
circuit wire connection.
Basic knowledge and operation skills of electric apparatus installation and maintenance in
hazardous sites.
Power Requirements
Install the unit in accordance with the manufacturer’s instructions and in accordance with
applicable local codes.
All installation and operation conform to your local electrical safety codes. must
Do not overload outlets and extension cords, which may cause fire or electrical shock.
Do not place the camera near or in a place where the camera may contact overhead
power lines, power circuits, or electrical lights.
Ensure power conforms to SELV (Safety Extra Low Voltage) and imited power that the l
source is rated AC 24V -as specified in IEC60950 1. (Power supply requirement is subject
to the device label).
All input/output ports are SELV circuits. Ensure that SELV circuits are connected only to
other SELV circuits.
Ground the unit using the ground connection of the power supply to protect the unit from
damage, especially in damp environments.
Please install easy- -to use device for power off before installing wiring, which is for
emergent power off when necessary.
Protect the plug and power cord from foot traffic, being pinched, and its exit from the unit.
Do not attempt to service the unit. Opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified personnel.
If the unit is damaged and requires service, unplug the unit from the main AC power
supply and from the PoE supply and refer to qualified service personnel. Damage may
include, but is not limited to:
The power supply cord or plug is damaged.
Liquid has spilled in or on the unit.
An object has fallen on the unit.
The unit has been dropped and the housing is damaged.
IV
The unit displays a marked change in performance.
The unit does not operate in the expected manner when the user correctly follows the
proper operating procedures.
Ensure a service technician uses replacement parts specified by the manufacturer, or that
have the same characteristics as the original parts. Unauthorized parts may cause fire,
electrical shock, or other hazards. Dahua is not liable for any damage or harm caused by
unauthorized modifications or repairs.
Perform safety checks after completion of service or repairs to the unit.
Use attachments and accessories only specified by the manufacturer. Any change or
modification of the equipment, not expressly approved by Dahua, could void the warranty.
Incorporate a readily accessible disconnect device in the building installation wiring for
quick power disconnect to the camera.
Dahua assumes no liability or responsibility for any fire or electrical shock caused by
improper handling or installation.
Application Environment Requirements
Please use the device within the allowed humidity (< ) 95%RH and altitude (< 3000m).
Transport, use, and store the unit within the specified temperature and humidity range.
Do not place the unit in a wet, dusty, extremely hot or an cold environment; extremely and
avoid environments with strong electromagnetic radiation or unstable lighting.
Do not use the device in the corrosive environment such as high salt fog area (sea, beach
and coastal area), acid gas environment and chemical plants.
Do not use the device in applications with strong vibration such as in boats and vehicles. s
Never push objects of any kind into this unit through openings as they may touch
dangerous voltage points or cause a short circuit that may result in fire or electrical shock.
Take care to not spill any liquid on the unit.
If your installation environment is subjected to one of the conditions above, contact our
sales staff to purchase cameras intended for the particular environment.
Please don’t install the device near the place with heat source, such as radiator, heater,
stove or other heating equipment, which is to avoid fire.
Do not aim the lens at intense radiation source (such as an the a lasersun, , and molten
steel for example) to avoid damage to the thermal detector.
Use the factory default package or material with equal quality to pack the device when
transporting.
Operation and Maintenance Requirements
Do not touch the heat dissipation component of the unit. This part of the unit is hot and
may cause a burn.
Do not open or dismantle the device; there are no components that a user can fix or
replace. Opening the unit may cause water leakage or expose components to direct light.
Contact the manufacturer or a qualified service representative to service the camera or to
replace a component, including the desiccant.
Dahua recommends the use of a thunder-proof device in concert with the unit.
Do not touch the CCD or the CMOS optic sensor. Use a blower to clean dust or dirt on the
lens surface. Use a dry cloth dampened with alcohol and gently wipe away any dust on
the lens.
Cybersecurity Recommendations VII
Change ONVIF Password
Older IP camera firmware does not automatically change the ONVIF password when
the system credentials are changed. Update the camera’s firmware to the latest
revision or manually change the ONVIF password.
Forward Only Ports You Need
Forward only the HTTP and TCP ports that are requited. Do not forward a wide range
of numbers to the device. Do not DMZ the device's IP address.
Do not forward any ports for individual cameras if they are all connected to a recorder
on site. Simply forward the NVR port.
Use a Different Username and Password for DSS
Do not a username/password combination that you have in use for other accounts,
including social media, bank account, or email in case the account is compromised.
Use a different username and password for your security system to make it difficult for
an unauthorized user to gain access to the IP system.
Limit Features of Guest Accounts
Ensure that each user has rights to features and functions they need to perform their
job.
Disable Unnecessary Services and Choose ecure ode S M s
Turn off specific services , such as SNMP, SMTP, and UPnP, to reduce network
compromise from unused services.
It is recommended to use safe modes, including but not limited to the following
services:
SNMP: Choose SNMP v3 and set up encryption passwords and authentication strong
passwords.
SMTP: Choose TLS to access a mailbox server.
FTP: Choose SFTP and use strong passwords.
AP hotspot: Choose WPA2-PSK encryption mode and use strong passwords.
Multicast
Multicast is used to share video streams between two recorders. Currently there are
no known issues involving Multicast. Deactivate this feature if not in use to enhance
network security.
Check the Log
The information stored in the network log file is ue to thelimited d equipment’s limited
storage capacity. nable the network log function to ensure that the critical logs are E
synchronized to the network log server if saving log files is required.
Check the system log if you suspect that someone has gained unauthorized access to
the system. The system log shows the IP addresses used to login to the system and
the devices accessed.
Physically Lock Down the Device
Perform physical protection to equipment, especially storage devices. For example,
place the equipment in special computer room and cabinet, and a implement access
control permission and key management to prevent unauthorized personnel from
accessing the equipment.
Connect IP Cameras to the PoE Ports on the Back of an NVR
Cameras connected to the PoE ports on the back of an NVR are isolated from the
outside world and cannot be accessed directly.
Table of Contents X
1
1 Overview
Dahua VTO Intercom devices allow tenants to view and talk with visitors and remotely unlock
doors all from an intuitive mobile app and an interior color indoor monitor. Each outdoor station
includes a 1.3 MP wide angle camera with manual rear pivot, two-way talk and enables remote
functions such as snapshot when ringing and the ability to record video and audio messages
to a VTH series monitor.
SIP Compatibility
Dahua Intercom devices are compatible with the Session Initiation Protocol version 2.0 (SIP),
a signaling protocol for Internet conferencing, telephony, presence, event notification, and
instant messaging. SIP is widely used to initiate and terminate Voice Over Internet Protocol
(VOIP) calls, as well as connect physical devices to mobile applications. Dahua Intercom
devices are ideal for single family homes as well as large residential complexes or commercial -
properties.
2
2 VTO Panels
Use this process to plan, install, and configure the security network and the IP devices.
VTO2000A-S / VTO2000A-2-S
The DHI- -SVTO2000A /VTO2000-A-2-S allows tenants to view and talk with visitors and
remotely unlock doors all from an intuitive mobile app and an interior color indoor monitor.
Each IP outdoor station includes a 1.3 MP wide angle camera with manual rear pivot, two-way
talk and enables remote functions such as snapshot when ringing and the ability to record
video and audio messages to a VTH series monitor.
Front Panel
Name
Description
1 MIC Inputs audio.
Camera Monitors door area.
3 Fill light Provides extra light for the camera.
4 Speaker Outputs audio.
Tag slot Put on information as needed.
6 Call button Press to call VTH or the management center.
Table VTO2000A2-1: -S Front Panel Keys
3
Rear Panel
Name
Description
1 Camera angle
adjustment A s djust camera angle.
2 Tamper alarm
The VTO would make alarm sound if it is being
removed from the wall by force, and the alarm will
also be sent to the management center.
3 Ethernet port Connects to the network with Ethernet cable.
For VTO2000A-2, this is a two- t. wire por
4 Cable ports Includes lock port, door sensor feedback port, and exit
button port.
5 Reserved port Reserved port.
4
VTO1201C-X-S
Front Panel
Name
Description
1 Microphone Audio input
2 Light Provide s extra . light for the camera
3 Speaker Audio outputs.
4 Dialing Area
*: End the call or delete the previously entered
character.
0 9: Use to enter room number or password .
#: Press to enter the password, then press again to
complete the password.
: Press to start a phone call. Enter the room
number then press this key to make the call.
: Press to call the management station.
5 Access card reader Recognizes access cards and unlocks a door.
6 S creen Displays information.
7 Camera s Monitor door area.


Produktspecifikationer

Varumärke: Dahua Technology
Kategori: Intercomsystem
Modell: DHI-VTO2111D-WP-S

Behöver du hjälp?

Om du behöver hjälp med Dahua Technology DHI-VTO2111D-WP-S ställ en fråga nedan och andra användare kommer att svara dig