Daniel Steiger Illumination Bruksanvisning

Daniel Steiger Titta Illumination

Läs gratis den bruksanvisning för Daniel Steiger Illumination (1 sidor) i kategorin Titta. Guiden har ansetts hjälpsam av 30 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 15.5 recensioner. Har du en fråga om Daniel Steiger Illumination eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/1

Illumination Watch

How to use the watch display:

Press any of the four buttons once, to see the time. Press

button A twice, to display the date. Press button C twice, to

display the day of the week (note that this is worked out

automatically by the watch itself, based on the date & year you

select). Press button D twice, to display the current alarm set

time.

How to set the digital time, date, & day:

First of all, push any button to bring up the time LEDs. Then,

hold down button B until the seconds start to ﬂash. Push button

B again, once, & you will see the hour digits ﬂashing. To

change the hour, push button C until the desired hour is

reached. Once the hour has been set, if you push button B

again, each push will - in this order - take you through the

minutes, the year, the month, the date, and the 24 hour/AM-PM

time display option. In each case, you can change any of these

by pushing button C.

How to operate/set the alarm:

To turn the alarm on/oﬀ, push button D once, and then push it

again, but hold the button in until you see the LED digits on the

face ﬂashing, & saying AL OFF, or AL ON. Push button C to

switch between on, and oﬀ. While the LEDs are still ﬂashing,

push button D again, and you will see the time the alarm is set

for, again ﬂashing. Use button C to change the hour to the

desired time, then push button D once, and again use button C

to adjust the minutes to the desired time. Once the alarm time

is set, it can just be left; no further button pushes are needed.

Note that when ALM is illuminated, that means you are in the

alarm setting mode. When it is not, you are not in the alarm

setting mode. When ALE is illuminated, that means the alarm is

on. When it is not, the alarm is oﬀ.

Warranty:

This warranty service run by: Timepieces International

Inc, 12800 NW South River Drive, Medley, FL, 33178,

with the authorization of Daniel Steiger. This warranty

covers the watch movement against manufacturer’s

defects for 5 years from date of purchase.

Within the period your watch will be repaired free of

charge, except for a handling and transportation fee

($29.95). This fee must be enclosed when returning your

watch for service. We cannot accept responsibility for

damage or loss caused in transit.

Important: Not covered by warranty

1.) Case, glass and band

2.) Damage caused through accidents, misuse, neglect,

or inexpert repairs

3.) Any discoloration, or wear

4.) Any loss or damage whilst the watch is not in our

possession, including transit by any means

5.) Any consequential loss whatsoever and how so ever

arising, so be accepted by us

6.) Batteries

Crown

Button D

Button C

Button B

Button A

Produktspecifikationer

Varumärke:	Daniel Steiger
Kategori:	Titta
Modell:	Illumination
Färg på produkten:	Grijs
Höjd (max):	327 mm
Roterbar:	Ja
Rotationsvinkel:	360 °
Typ patron:	Keramisch
Vattenflödeskontroll:	Kraanhendel
Antal kranar/handtag:	Enkel
Vattenflödesvinkel:	20 °
Monteringsytas tjocklek (max):	50 mm
Monteringsgrindens diameter:	52 mm
Slanganslutningsgänga:	G3/8
Höjd över monteringsytan (stängd):	146 mm
Höjd på mousseur:	220 mm