Darkglass Exponent 500 Bruksanvisning
Darkglass
gitarrförstärkare
Exponent 500
Läs gratis den bruksanvisning för Darkglass Exponent 500 (31 sidor) i kategorin gitarrförstärkare. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 3.8 stjärnor baserat på 2 recensioner. Har du en fråga om Darkglass Exponent 500 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/31
Before we get started
Before we get started, there are a few things we need to do
to make sure your Exponent stays in tip-top shape!
Select the correct voltage
Before plugging in e500, please ensure that the voltage
selector on the back of the unit is set to the correct mains
voltage.
Use an appropriate load and cables
The speaker output has a minimum load of 4
Ω
.
Never use the speaker output with an instrument cable.
e500 can be operated without a cabinet.
Use the right MIDI cable
Use the 7−pin MIDI connector
only
with the Darkglass MIDI
footswitch.
Use the 5−pin MIDI connector with other MIDI equipment.
Before we get started
Getting started
Clipping indicators
Quick-Pots
Using the Darkglass Suite
Presets view
Presets
MIDI
USB audio interface
Bluetooth audio
Settings
Firmware update
Technical Specications
Dimensions
Exponent 500 Manual
500W Bass Amplier
CREATIONS DEALERS SUITE APPAREL
Getting started
Connecting your gear
Connect your
instrument
with an
instrument cable
to the
main ¼” input jack on the front panel.
Connect to one or more of the following:
• Mixing desk or audio interface with the
XLR output
.
* If you are experiencing ground noise in your DI signal, try
changing the ground lift toggle position.
• Headphones to the
headphone output
.
• Outboard gear to the FX loop.
• Speaker output to a cabinet using the
speakON Combo
jack.
• 4
Ω
minimum load.
• A speakON or a ¼” speaker cable can be used.
• Never use an instrument cable.
By default, the speaker output is muted when
headphones are connected. This can be disabled in the
Darkglass Suite.
Potentiometers
There are seven potentiometers on the front face of
e500.
Set
input gain
with the
INPUT
pot.
Set
master volume
with the
MASTER
pot.
The XLR output is unaected by the
MASTER
volume.
The remaining ve pots are Exponent 500’s
Quick-Pots
.
Changes to the Quick-Pots are
automatically saved
.
The current position of each Quick-Pot is always shown
on its surrounding LEDs.
Warning
Warranty
Produktspecifikationer
| Varumärke: | Darkglass |
| Kategori: | gitarrförstärkare |
| Modell: | Exponent 500 |
Behöver du hjälp?
Om du behöver hjälp med Darkglass Exponent 500 ställ en fråga nedan och andra användare kommer att svara dig
gitarrförstärkare Darkglass Manualer
12 Oktober 2025
gitarrförstärkare Manualer
- Roland
- Hughes & Kettner
- Victory
- Artec
- Harley Benton
- Aguilar
- NUX
- Hotone
- L.R.Baggs
- Digitech
- Vox
- EVH
- Maxon
- Markbass
- Radial Engineering
Nyaste gitarrförstärkare Manualer
12 Oktober 2025
12 Oktober 2025
10 Oktober 2025
10 Oktober 2025
9 Oktober 2025
6 Oktober 2025
6 Oktober 2025
6 Oktober 2025
5 Oktober 2025
5 Oktober 2025