DataComm 45-8021-1S Bruksanvisning

DataComm ej kategoriserat 45-8021-1S

Läs gratis den bruksanvisning för DataComm 45-8021-1S (2 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 27 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 14 recensioner. Har du en fråga om DataComm 45-8021-1S eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

Instruction / Installation Sheet

Connected Media Box

Part # 45-8017-1, 45-8011-1P, 45-8021-1S & 45-8031-1C

Parts Included:

● Connected Media Box Enclosure

● Trim Ring

● Two (2) Power Supply Mounting Brackets

● Two (2) 20” Hook and Loop Fasteners

Tools Needed:

● Flat Blade and Phillips Head Screwdriver

● Drill is optional

● Utility Knife

● Four (4) Metal Wood Screws

Page 1 of 2

Installation Instructions:

1. Location Selection

The Connected Media Box will fill an entire stud bay horizontally. Make sure the box will fit either below the TV mount or to the side and still be able to

be covered by the TV. The outside dimensions of the trim ring are 17.50” W x 18” H.

Locate the panel in close proximity to a 110VAC for power requirements of amplifier or security panels. There is an outlet knockout in the bottom of the

panel for the installation of an UL and/or ETL approved

outlet or J-Box.

NOTE: Have a licensed electrician install the outlet to meet current code requirements.

NOTE: There is no fire rating on this panel, therefore, it should not be installed in fire rated walls.

Feature Identification:

A) Knock-outs for standard sized conduit

B) Retrofit mounting holes for old work installation

Industry Standard mounting holes for phone and video modules

made by DataComm Electronics and other major manufacturers

D) Knock-out for metal outlet or J-Box (must have UL and/or ETL

approval)

E) Mounting Brackets to hold One Connect Box or other TV power