Davis 0821 Bruksanvisning

Davis Titta 0821

Läs gratis den bruksanvisning för Davis 0821 (4 sidor) i kategorin Titta. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 6.5 recensioner. Har du en fråga om Davis 0821 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/4
208050 en ma 2012.07
*208.050 MANUALCAN-OPENER -
No. REF. DESCRIPTION
réf.
1 02870 RILSAN LEVER
2 02830 BLADE
3 02873 COURBANE RING
4 OX873 ST/ST RING
5 02877 BLADE SCREW
6 02872 NICKELED STEEL PLAQUETTE
7 02820 COG-WHEEL
8 02810 BODY ALONE 02
9 SQUARE 02
10 02888 SCREW 6X10 FOR 02
02840 HANDLE FOR CAN OPENER 02
OX842 HANDLE + CLIP FOR 02
02880 BED PLATE TO BE BOLTED EPOXY 02
02890 CLAMP BASE EPOXY 02
ASSEMBLING OF THE CAN-OPEN;
Fixe the standby bolting to the table with 4 screws.
Fixe the stand with a clamp xation. Tighten very hard so that the base can’t move when you open
a can.
Fixe the stand with wall! fi xation hang on the wall (about 70/80 cm height).
Put the can-opener in the place allowed in the base, the blade facing the base.
UTILISATION
Disengage the knurled wheel in displacing the
rilsan lever to the left.
Lift the can-opener and place the can against the
pillar.
Let the tool drop and push down so that the blade
pierces the can lid


Produktspecifikationer

Varumärke: Davis
Kategori: Titta
Modell: 0821

Behöver du hjälp?

Om du behöver hjälp med Davis 0821 ställ en fråga nedan och andra användare kommer att svara dig