Deltaco DUR-900 Bruksanvisning

Deltaco Streckkodsläsare DUR-900

Läs gratis den bruksanvisning för Deltaco DUR-900 (54 sidor) i kategorin Streckkodsläsare. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 2.5 recensioner. Har du en fråga om Deltaco DUR-900 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/54

A N O R D I C B R A N D

User Guide

Naudotojo vadovas

Lietotāja rokasgrāmata

Användarhandledning Kasutusjuhend

Käyttöohje Bedienungsanleitung

Brugervejledning Mode d’emploi

Brukerveiledning Instrukcja użytkowania

Gebruiksaanwijzing

ENG

SWE

FIN

DAN

NOR

LIT

LAV

EST

GER

FRA

POL

NLD

DUR-900

ENG - User Manual

Safety instructions

1. Do not look into or observe the device’s light, neither directly or through an optical instrument.

2. Do not disassemble or remove the lens cover. If the lens cover is removed, your eyes will be directly exposed to the light.

4. Keep the product away from children.

Do not continue to use the product if it has been damaged or deformed. Do not leave it in hot environments.

Product information

This barcode scanner provides an accurate, fast and easy complete solution for data entry and storage for computer

information systems.

The product has two working modes: manual and auto-sensor.

This product provides 4 interfaces to connect to any host computer system: Keyboard (Keyboard wedge), RS-232, USB

HID and VCOM.

the device has been powered off.

T r r r r rhis p oduct has mo e settings than available ba codes in this manual. If needed you can c eate you ow r r n ba codes to set you

ow “L ”n settings. One example is the ED on time , it has about 200 possible settings but only 4 examples of ba codes a e in thir r s

fo the co esponding setting you ant to c eate o changer rr w r r .

Scan barcodes

In order to obtain a good scan effect, you should aim the

barcode reader at the center of the barcode, but you can

aim from any direction.

The closer the scanner is to the barcode, the smaller the aiming beam is;

the farther away the scanner is from the barcode, the larger the aiming beam is.

If the barcode is small, the scanner should be close to the barcode; if the barcode is large, the scanner should be farther

away from the barcode, so the barcode can be read easily and correctly.

1. Scan window

2. Button

3. LED

4. Sound output

5. Cable removal hole

Cable removal

1. Locate the cable removal hole on the bottom of the scanner.

Readability VS performance

Each type of barcode has its own unique properties. Enable the ability to read barcode types via the settings found in this

manual. You can disable the scanner from r reading ba code types that ill not be used to impw rove the scanner’s performance.

Maintenance

1. Stains and dust on the scan window may affect the scanning. Use a lint-free cloth / lens tissue of good quality to gently

wipe clean the window if needed. Poor quality paper will damage the surface smoothness of the scan window and affect

the scanner’s effect.

2. The scanner’s housing can be wiped with a clean soft cloth. When needed, moisten the cloth with water or a mild soap

solution and wipe it with a soft cloth.

Troubleshooting

Q1. Problem: The data cable is correctly installed, but the indicator LED or beep sound is not working when the button is

pressed.

A1. Possible causes: No power or cable error. Solutions: Please make sure the cable is connected and the scanner is

turned on. When using the USB port, please connect the USB cable to the USB port of the computer motherboard. Do not

use an extended USB port or other USB extension cable. Check if the cable connection is loose.

Q2. Problem: The light is on but barcode cannot be read.

A2. Possible causes: The barcode type is not enabled, damaged barcode or inappropriate scan distance.

Solutions: Enable the barcode type. Try scanning other barcodes with the same barcode type.

Move the barcode scanner closer or farther away from the barcode.

Q3. Problem: T rhe scanned data is displayed inco ectly on the host afterr the

A3. Possible causes: Input error or other settings for the scanner. Solutions: Change input to default English input or

restore the scanner to factory default.

Q4. Problem: Other situations.

A4. Possible cause: Scanner operation error. Solutions: Turn off and reconnect the device and scanner correctly.

Turn on the power of the device, restore the scanner to the factory default and rescan the barcode.

Support

More product information can be found at www.deltaco.eu.

Produktspecifikationer

Varumärke:	Deltaco
Kategori:	Streckkodsläsare
Modell:	DUR-900
Enhetsplacering:	Ingebouwd
Typ av operation:	Draaiknop
Färg på produkten:	Roestvrijstaal
Inbyggd display:	Nee
Bredd:	680 mm
Djup:	500 mm
Höjd:	80 mm
Typ av material (överst):	Roestvrijstaal
Brännare/kokzonseffekt 2:	1750 W
Brännare/kokzonseffekt 3:	3000 W
Brännare/kokzonseffekt 1:	1750 W
Antal brännare/kokzoner:	5 zone(s)
Typ av häll:	Gaskookplaat
Elektronisk tändning:	Ja
Brännare/kokzon typ 1:	Regulier
Brännare/kokzon typ 2:	Regulier
Typ av brännare/kokzon 3:	Groot
Antal gasbrännare:	5 zone(s)
Antal elektroniska kokzoner:	0 zone(s)
Sjud brännare/kokzon:	1000 W
Normal brännare/kokzon:	1750 W
Kontrollposition:	Boven voorzijde
Ansluten last (elektrisk):	- W
Installationsfackets bredd:	557 mm
Installationsfack djup:	477 mm
Stor brännare/kokzon:	3000 W
Ansluten last (gas):	11000 W
Forma sjudgrop/kokzon:	Rond
Forma vanlig brännare/kokzon:	Rond
Forma stor brännare/kokzon:	Rond
Värmesensorskydd:	Ja
Pannstödsmaterial:	Gietijzer
Antal kokzoner som ska användas samtidigt:	5
Forma extra stor tryckkokare/kokzon:	Rond
Extra stor höghastighetskokzon:	3500 W
Typ av brännare/kokzon 4:	Sudderen
Brännare/kokzonseffekt 4:	1000 W
Strömkälla brännare/kokzon 1:	Gas
Strömkälla brännare/kokzon 2:	Gas
Strömkälla brännare/kokzon 3:	Gas
Strömkälla för brännare/kokzon 4:	Gas
Wokbrännare:	Ja
Wokbrännares läge:	Midden
Placera brännare/kokzon 1:	Links achter
Placera brännare/kokzon 2:	Links voor
Placera brännare/kokzon 3:	Rechts achter
Placera brännare/kokzon 4:	Rechts voor
Kokzon 1 form:	Rond
Kokzon 2 form:	Rond
Kokzon 3 form:	Rond
Kokzon 4 form:	Rond
AC-ingångsspänning:	220 - 230 V
AC-ingångsfrekvens:	50 Hz
Strömkälla för brännare/kokzon 5:	Gas
Typ av brännare/kokzon 5:	Extra groot
Placera brännare/kokzon 5:	Centraal
Brännare/kokzonseffekt 5:	3500 W
Kokzon 5 form:	Rond