Denver CRP-514 Bruksanvisning

Denver Radio CRP-514

Läs gratis den bruksanvisning för Denver CRP-514 (6 sidor) i kategorin Radio. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 2.5 recensioner. Har du en fråga om Denver CRP-514 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/6

ENGLISH

FUNCTION AND CONTROLS

1. (AL1) ALARM 1 ON / OFF SET

2. << / TUNE - /MONTH/DAY/DST

3. PROJECTION ON/OFF

4. PROJECTION UNIT

5. PROJECTION TIME/TEMP 180° FLIP

6. >> / TUNE +/ C-F/YEAR

7. (AL2) ALARM 2 ON / OFF SET

8. VOLUME DOWN

9. VOLUME UP

10. SNOOZE / SLEEP / DIMMER

11. SET/MEM/M+

12. ON / OFF RADIO / ALARM OFF

13. DISPLAY

14. BATTERY COMPARTMENT

15. RATING LABEL

16. SPEAKER

17. TEMPERATURE SENSOR(IN DOOR)

18. FM ANTENNA

19. AC POWER CORD

20. FOCUS ADJUSTMENT FOR PROJECTION UNIT

ENG-1

DENVER CRP-514

POWER CONNECTION

Plug the AC power cord to a household outlet AC source. This unit is equipped

with a battery back up system, it requires a 3V CR2032 at lithium battery

(not included). Insert the battery in the battery compartment, making certain

that the positive and negative (+ and -) battery terminals are attached to the

corresponding terminals on the plate in the battery compartment. If an AC power

failure occurs, the clock automatically switches to the battery power supply, the

clock and timer memory continue running. When the AC power resumes, the

clock switches back to AC again.

TIME AND CALENDAR MANUAL SETTING

Setting Time and Calendar

Press SET/MEM/M+ (11) button in standby mode and keep depress over 2

seconds to enter time set mode, after enter the setting mode, press SET/MEM/

M+ button (11) to change the mode cycle as follows:

Normal → Year → Month → Day → 12/24 H format → Real time Hour → Real

time Min → Normal

Action (during data adjustment):

- Press << / Tune - button (2) to adjust data backward.

- Press >> / Tune + button (6) to adjust data forward.

- Keep depressed << or >> button for 2 seconds to enable auto forward.

- Use SET/MEM/M+ (11) button to conrm each setting.

ALARM SETTING

Setting Alarm 1 and Alarm 2

In standby mode, press the AL1 (1) or AL 2 (7) button once to preview the alarm

time.The alarm time is displayed, press & hold the AL1 / AL2 buttons for 3

seconds and the hours will blink. Press AL1 / AL2 button (1/7) and keep depress

over 2 seconds to enter alarm set mode. Once in the setting mode, press alarm

set button (1/7) to change the mode cycle as follows:

Normal → AL 1 Hour → AL 1 Min → AL 1 weekday Alarm → AL 1 wake beep →

AL 1 wake radio → AL 1 wake radio volume →Normal.

Normal → AL 2 Hour → AL 2 Min → AL 2 weekday Alarm → AL 2 wake beep →

AL 2 wake radio → AL 2 wake radio volume →Normal.

Select alarm weekday mode as follows:

1-5: Monday to Friday

1-7: Whole week

6-7: Saturday & Sunday

1-1: One day of week

ENG-2

Action (during data adjustment):

- Press << / Tune - (2) button to adjust data backward.

- Press >> / Tune + (6) button to adjust data forward.

- Keep depressed << or >> button for 2 seconds to enable auto forward.

- Use AL1 / AL2 set button to conrm each setting.

ALARM

Beep alarm or radio alarm will ring for 30 minutes if no key is pressed, then it will

stop automatically and wait for same alarm time on next day.

SNOOZE FUNCTION

- When Alarm rings, press Snooze button (10) to suspend the alarm & to

activate the snooze function, Beep or Radio alarm will stop. 9 minutes later

the alarm will ring again. Press SNOOZE key again, alarm will be suspended

again, another 9 minutes later the alarm will ring again and so on until the

next alarm rings.

Note: The interval time of the Snooze function is 9 minutes.

- If you want to disable the SNOOZE function and stop alarm completely,

press Radio ON/OFF button (10). If you don’t press any button, the alarm will

ring during 30 minutes & stop automatically.

- Icon of AL1 and AL2 will blink as long as Snooze function is still operating.

Once Snooze is turned off icon of AL1 / AL2 stop blinking and lights on the

display.

RADIO MODE

Note: Ensure that the FM antenna is completely unrolled and extended to have

the best FM reception.

Press the Radio ON/OFF button (12) to turn the unit on.

Use the Tune - (2) or Tune + (6) button to select the desired radio station. If you

press and hold the Tune – (2) or Tune + (6) button for one second, then release,

the unit will automatically scan to the next broadcasting station.

Press the ON/OFF button (12) to turn the radio OFF.

To preset radio station

Press the Radio ON/OFF button (12) to turn the unit ON.

Use the Tune - (2) or Tune + (6) button to select the desired radio station.

Press the MEM.SET/M+ (11) button; “P01” will blink in the display.

Press the ‘MEM.SET / M+’ (11) button again to set the preset.

Repeat steps 2 through 4 to set more presets.

The unit can preset 10 stations totally for FM.

When “P01-P10” blinks, press Tune – (2) or Tune + (6) button to select the

preset number.

ENG-3

Produktspecifikationer

Varumärke:	Denver
Kategori:	Radio
Modell:	CRP-514
Inbyggd display:	Ja
Vikt:	670 g
Bredd:	87 mm
Djup:	180 mm
Höjd:	88 mm
Förpackningens bredd:	97 mm
Frekvensband:	FM, PLL
Antal larm:	2
Inbyggda högtalare:	Ja
Typ av tuner:	Digital
Bakgrundsbelysning:	Ja
Termometer:	Ja
Produkter per intermodal container (20 fot):	6924 styck
Antal batterier:	1
Produktens färg:	Svart
Snooze funktion:	Ja
Skärmtyp:	LCD
Produkter per intermodal container (40 fot, HC):	16548 styck
Låddjup:	210 mm
Produkter per ytterförpackning:	12 styck
Uteffekt (RMS):	- W
AC-inspänning:	230 V
Apple-kompatibel dockningsmöjlighet:	Stöds inte
Växelström Frekvens:	50 hz
Strömkälla:	AC/Batteri
Ljusstyrkeinställning:	Ja
Alarm:	Ja
Färg på bakgrundsbelysning:	Blå
Dockningsstation ingår:	Nej
Vilolägestimer:	Ja
Hörbart larm:	Ja
Kompatibla batteristorlekar:	CR2032
Typ av radio:	Klockradio
Projicering:	Ja
Projektion funktion:	Tid
Väckningsläge med radio:	Ja
Projiceringsvinkel:	180 °