Denver DAB-35 MK2 Bruksanvisning
Läs gratis den bruksanvisning för Denver DAB-35 MK2 (7 sidor) i kategorin Radio. Guiden har ansetts hjälpsam av 5 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 3 recensioner. Har du en fråga om Denver DAB-35 MK2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/7
DAB Radio Signal
Please notice that DAB signal can be weaken MUCH depending on the type of
building you are living in. (fx. It can be hard to catch proper signal when being in
a concrete building.)
Signal can also be different in different areas of the country. Please check your
local transmitter to get the best signal in your area.
Vær opmærksom på at det kan påvirke DAB signalet MEGET hvilken type
bygning man bor i. Det kan f.eks. være svært at få et ordentligt signal hvis man
bor i beton byggeri.
Der er også forskel på hvor god dækningen er i forskellige områder. Tjek nyeste
dækningskort på www.dabradio.dk under ”hvad er digital radio”.
DAB-35MK2
Instruction manual
ENG-1 ENG-2
BASIC OPERATION - GETTING STARTED
Press the button to turn the unit on, it will automatically enter into the DAB mode and STANDY
perform auto scan function. During the scan, the display show “Scanning…” together with a slide bar
that indicates the progress of the scan and the amount of stations that have been found so far. (F.2)
Once the scan has finished, the radio will select the first alphanumerically found station. You can
now press / buttons to explore the found stations followed by pressing the button to ▼ ▲ SELECT
select listening to the stations.
Note: If there is no stations found after auto scan, the radio will display "Full Scan", you can now
press / buttons to select “Full scan” or “Manual tune” for stations, and press button to ▼ ▲ SELECT
finally confirm.
F.1 F.2
MENU Tree as below:
Mode Mode
DAB
DAB Menu
Full Scan
Manual Tune
Prune
System
FM
Menu Menu
System Menu
Time
Sleep
Backlight
Factory Reset
SW version
Backlight Menu
Backlight Low/ Medium/ High
Time Menu
Set Time/Date hh:mm/DD-MM-YYYY
Auto Update Update from Any/Update from DAB/Update from FM/ No Update
Set 12/24 hour 12/24
Set Date Format DD-MM-YYYY/MM-DD-YYYY
Sleep Menu
Sleep Off /10/20/30/60/70/80/90minutes
FM Menu
Scan Setting All station/Strong stations only
Audio Setting Stereo Allowed/Forced mono
System
17
PARTS
Front view Rear view
SWITCHING YOUR RADIO ON FOR THE FIRST TIME
AC Operation
1. Insert the DC power jack of AC/DC adaptor to the DC input socket located at the rear of the
radio.
2. Plug the AC/DC Adaptor to the AC mains outlet.
3. Press the to turn the radio on.STANDBY
Remarks: If the AC Adaptor voltage is over than 6V, it will possible make the line damage.
DC (battery) operation
1. Ensure the AC/DC adaptor is disconnected from the radio and AC mains.
2. Installed the batteries (4×1.5V UM3/AA battery) into the battery compartment.
3. Press the to turn the radio on.STANDBY
Remarks: To obtain the best performance in DC operation, the use of alkaline batteries is highly
recommended.
Menus:
The following controls are used to move about the menu tree to choose and select the required
settings:
Press and hold button to enter into the “MENU”. Press the or MENU/INFO TUN/CH▲ TUN/CH▼
button to navigate the desire option, then press button to confirm.SELECT
1. SPEAKER
2. STANDBY BUTTON
3. MODE BUTTON
4. LCD DISPLAY
5. TUN/CH▼ BUTTON
6. TUN/CH▲ BUTTON
7. ALARM/SNOOZE BUTTON
8. MENU/INFO BUTTON
9. VOLUME CONTROL
10. SELECT BUTTON
11. PRESET BUTTON
12. ROD ANTENNA
13. DC INPUT SOCKET
14. RATING LABEL
15. HEADPHONE JACK
16. BATTERY DOOR
17. AC/DC ADAPTOR
No function
DENVER DAB-35MK2 DENVER DAB-35MK2
ENG-3 ENG-4
FM radio
1. To select FM, press the button, the display will show FM and the frequency.MODE
2. To activate auto search, press button or press and hold / buttons until the radio SELECT ▼ ▲
starts to scan the frequency band, the display will show ‘Scanning …‘(F6), and it will stop
automatically once a station has been found.
3. To search manually, press / buttons in the desired direction to increment the frequency by ▼ ▲
0.05MHz. If reception is still poor adjust the position of the antenna or try moving the radio to
another location.
Scan setting
In mode, press and hold button and then press / buttons to select FM MENU/INFO ▼ ▲
“Scan setting”. And press the button to confirm. Press / buttons to select SELECT ▼ ▲
“All stations/Strong stations only”, and then press the button to confirm the setting. SELECT
USING HEADPHONES (not included)
A stereo headphone jack has been provided so that the radio can be used without disturbing others.
Plug in the headphones at the point marked ‘ ’ and adjust the listening volume to your chosen
level. Excessive sound pressure from earphones and headphones can cause hearing loss. The
speakers will not operate when earphones are fitted.
TECHNICAL SPECIFICATION
Rated voltage (adaptor)
Adaptor output
Rated voltage (radio)
Power consumption
Audio output
Radio
Operating conditions Temperature:
Unit dimension :
Weight :
***SPECIFICATION SUBJECT TO CHANGE WITHOUT FURTHER NOTICE.***
RESET
1. If moving the radio to another location in the country the pre-tuned and stored DAB stations
may no longer be available and it will be necessary to reset the radio back to the factory settings.
2. With the unit switched on, press and hold the button and press / buttons MENU/INFO ▼ ▲
/until the display shows ‘System’ and press the button and continue press SELECT ▼ ▲ buttons
/until the display shows “Factory Reset <No> Yes’ and press ▼ ▲ buttons to “<Yes>” and press
the button. (F.7), (F.8)SELECT
3. The radio will display “Restarting….” and will then go into standby mode.
Note 1: All stored programmed stations will be lost during reset.
Note 2: Use the battery status without reset function.
DAB Auto Scan
The auto scan will search for the entire DAB Band III channels, After the scan has finished, the first
alphanumerically found stations will be automatically selected.
1. To activate auto scan, press and hold button, and press / buttons to enter into the MENU ▼ ▲
Menu to select “Full scan”, finally press the button to confirm. The display will show SELECT
“Scanning…” and a pressing slide bar.(F.3)
2. All the stations that have been found will be stored automatically, press / buttons to ▼ ▲
explore the stations that have been found. When you find a station that you would like to listen,
press the button to confirm.SELECT
DAB Manual tune
1. To select manual tune, press and hold button, and then press / buttons to MENU/INFO ▼ ▲
select “Manual tune”(F.4). And press the button to confirm. SELECT
2. Press / buttons to move through the DAB channels, the display will show “5A to 13F” and ▼ ▲
their associated frequencies. (F.5)
3. When your desired frequency appears in the display, press the button to listen, the SELECT
name of the station group (ensemble/multiplex) will be displayed.
Manual tune
< 5A 174.928MHz >
F.5
DAB
< Manual tune >
F.4
DAB
< Full scan >
F.3
92.75MHz
Scanning . . .
F.6
System
< Factory Reset >
Factory Reset ?
< No > Yes
F.7
F.8
AC 100 – 240V~ 50/60Hz, 0.2A
DC 6V 1A
DC 6V (1.5V x 4 AA)
6 W
2 W RMS
DAB 174-240MHz
FM 87.5-108MHz
5°C to 35°C
Humidity 5% to 90%
190 (L) × 110(W) × 115 (H) mm
0.8kg
DENVER DAB-35MK2 DENVER DAB-35MK2
Produktspecifikationer
| Varumärke: | Denver |
| Kategori: | Radio |
| Modell: | DAB-35 MK2 |
Behöver du hjälp?
Om du behöver hjälp med Denver DAB-35 MK2 ställ en fråga nedan och andra användare kommer att svara dig
Radio Denver Manualer
13 Augusti 2025
16 Juli 2025
16 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
Radio Manualer
- Terratec
- ECG
- Eissound
- Alecto
- Makita
- Difrnce
- Sweex
- La Crosse Technology
- Icom
- Topcom
- Furrion
- Karcher
- Lexon
- Power Dynamics
- Sunstech
Nyaste Radio Manualer
13 September 2025
13 September 2025
12 September 2025
12 September 2025
12 September 2025
12 September 2025
12 September 2025
12 September 2025
12 September 2025
12 September 2025