Denver LSC-531 MK2 Bruksanvisning

Denver Lättnad LSC-531 MK2

Läs gratis den bruksanvisning för Denver LSC-531 MK2 (29 sidor) i kategorin Lättnad. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.0 stjärnor baserat på 1.5 recensioner. Har du en fråga om Denver LSC-531 MK2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/29
--Instructions
1
Denver Smart Home
Android App iOS App
1 2 3
2
Lighting product instructions for use
Universal Edition Denver Smart Home App
Preparation for use
1. Power on the lamp while ensuring that your smartphone is connected to the 2.4 GHz Wi-
Fi network;
2. Download and open the app.
Search for “Denver Smart Homein the App Store or scan the QR code below or on the
package to download and install the app.
Tap the "Register" button to register if you download it for the first time. If you already
have an account, tap the "Login" button.
Device Network configuration
1. Open the Denver Smart Home app and access the "Devices" page. Tap the "+" mark in
the upper right corner of the page.
2. Select "Lighting devices" on the device list page.
3. Two configuration modes are available for connection: EZ mode and AP mode.
1) EZ Mode
Ensure the light flashes quickly (twice a second).This indicates that the lightstrip is in
configuration mode.
If it is not blinking, then push and hold the reset button until it turns off. Then let go and it
goes into configuration mode.. Tap the "Confirm light blinks rapidly" button on the “Add
Device” page to start connection.
Model identifier
Denver LSC-531
Input voltage
220-240VAC
Input AC frequency
50Hz/60Hz
Output voltage
12VDC
Output current
2A
Output power
24W
Average active efficiency
82%
Efficiency at low load (10%)
70%
No-load power consumption
0.5W

Produktspecifikationer

Varumärke: Denver
Kategori: Lättnad
Modell: LSC-531 MK2

Behöver du hjälp?

Om du behöver hjälp med Denver LSC-531 MK2 ställ en fråga nedan och andra användare kommer att svara dig