DeWalt DCD775 Bruksanvisning
DeWalt
Borrmaskin
DCD775
Läs gratis den bruksanvisning för DeWalt DCD775 (7 sidor) i kategorin Borrmaskin. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 1.5 recensioner. Har du en fråga om DeWalt DCD775 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/7
DC720-XE, DC730-XE, DC743-XE
CORDLESS COMPACT 1/2" (13 mm) DRILL/DRIVER
DC725-XE, DCD775-XE, DC727-XE, DC737-XE
CORDLESS COMPACT 1/2" (13 mm) DRILL/DRIVER/HAMMERDRILL
INSTRUCTION MANUAL
1
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY D
EWALT TOOL,
CALL US AT: (Aust) or (NZ). 1800 654 155 0800 339258
SAFETY INSTRUCTIONS FOR POWER TOOLS
When using power tools, always observe the safety regulations applicable in your
country to reduce the risk of fire, electric shock and personal injury. Read the following
safety instructions before attempting to operate this product. Keep these instructions in
a safe place.
WARNING: To reduce the risk of injury, read the instruction manual.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings and all instructions Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious
injury.
SAVE THESE INSTRUCTIONS
The term “power tool” in the warnings refers to your mains-operated (corded) power
tool or battery-operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords increase the risk of electric
shock.
e) When operating a power tool outdoors, use an extension cord suitable
for outdoor use. Use of a cord suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual
current device (RCD) protected supply. Use of an RCD reduces the risk of
electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medication. A moment of inattention
while operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal injuries.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each signal
word. Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation which, if
not avoided, result in will death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if
not avoided, result in could death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if
not avoided, result in may minor or moderate injury.
NOTICE: Used without the safety alert symbol indicates a
potentially hazardous situation which, if not avoided, result in may
property damage.
Produktspecifikationer
| Varumärke: | DeWalt |
| Kategori: | Borrmaskin |
| Modell: | DCD775 |
Behöver du hjälp?
Om du behöver hjälp med DeWalt DCD775 ställ en fråga nedan och andra användare kommer att svara dig
Borrmaskin DeWalt Manualer
7 Juni 2025
6 Januari 2025
3 Januari 2025
31 December 2025
24 December 2024
19 Oktober 2024
14 Oktober 2024
26 September 2024
26 September 2024
26 September 2024
Borrmaskin Manualer
- Rodcraft
- Einhell Bavaria
- Stomer
- Hilti
- Powerblade
- Stalco
- Stanley
- AEG
- Max Bahr
- Max
- Truper
- Maestro
- Wurth
- G-Technology
- Fieldmann
Nyaste Borrmaskin Manualer
13 Juni 2025
13 Juni 2025
13 Juni 2025
12 Juni 2025
7 Juni 2025
3 Juni 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025