DeWalt DCN690B Bruksanvisning
DeWalt
Häftapparat
DCN690B
Läs gratis den bruksanvisning för DeWalt DCN690B (42 sidor) i kategorin Häftapparat. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 2 recensioner. Har du en fråga om DeWalt DCN690B eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/42
DCN690
20V Max* Cordless Framing Nailer
Cloueur pour charpente sans fil 20V max*
Clavadora inalámbrica de 20 V max*
INSTRUCTION MANUAL
GUIDE D’UTILISATION
MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA
DE GARANTÍA. LÉASE ESTE INSTRUCTIVO ADVERTENCIA:
ANTES DE USAR EL PRODUCTO.
Questions? Visit www.DEWALT.com
Before returning this product call
1-800-4-DEWALT
IF YOU SHOULD EXPERIENCE A PROBLEM WITH YOUR DEWALT
PURCHASE,
CALL 1-800-4 DEWALT
IN MOST CASES, A DEWALT REPRESENTATIVE CAN RESOLVE
YOUR PROBLEM OVER THE PHONE.
IF YOU HAVE A SUGGESTION OR COMMENT, GIVE US A CALL.
YOUR FEEDBACK IS VITAL TO THE SUCCESS OF DEWALT’S
QUALITY IMPROVEMENT PROGRAM.
English
2
A. Trigger
B. Trigger lock-off
C. Depth adjustment wheel
D. Low battery & jam/stall
indicator light
E. Stall release lever
F. Contact trip
G. Magazine
H. Pusher latch
I. Bump/sequential
selector switch
J. Rotating rafter/belt hook
K. On-board hex wrench
L. Battery Pack
NAIL SPECIFICATIONS
Clipped Head
Nail Lengths 2"– 3-1/2" (50 mm – 90 mm)
Shank Diameters .113"–.131" (2.8 mm – 3.3 mm)
Nail Stick Angles 30˚– 34˚
Shank Types Smooth and Ring
Defi nitions: Safety Guidelines
The definitions below describe the level of severity for
each signal word. Please read the manual and pay
attention to these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death
or serious injury.
WARNING: Indicates a potentially hazardous
situation which, if not avoided, result in could death
or serious injury.
CAUTION: Indicates a potentially hazardous
situation which, if not avoided, result in may minor
or moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
JTOOL SPECIFICATIONS
Firing Mode Selective: Bump or Sequential
Voltage 20
Height 13.5" (346 mm)
Width 4" (104 mm)
Length 13.25" (335 mm)
Weight 7.80 lbs. (3.538 kg)
Magazine Angle 33˚
Loading Capacity Up to 55 nails
G
K
E
A
F
FIG. 1
H
B
C
I
D
L
English
3
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY D WALT TOOL, E
CALL US TOLL FREE AT: 1-800-4-DEWALT (1-800-433-9258).
WARNING: To reduce the risk of injury, read the instruction manual.
General Power Tool Safety Warnings
WARNING! Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases or dust. Power tools create sparks which may ignite the
dust or fumes.
c) Distractions Keep children and bystanders away while operating a power tool.
can cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools. Unmodified
plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool
will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a ground
fault circuit interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of
electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use a power tool while you are tired or under the influence
of drugs, alcohol or medication. A moment of inattention while operating power tools
may result in serious personal injury.
b) Protective Use personal protective equipment. Always wear eye protection.
equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off position before
connecting to power source and/or battery pack, picking up or carrying the
tool. Carrying power tools with your finger on the switch or energizing power tools that
have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench
or a key left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables
better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewelry or long hair can be
caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust collection
can reduce dust-related hazards.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power
tool that cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the
power tool before making any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce the risk of starting the power tool
accidentally.
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits, etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended could
result in a hazardous situation.
5) BATTERY TOOL USE AND CARE
a) Recharge only with the charger specified by the manufacturer. A charger that is
suitable for one type of battery pack may create a risk of fire when used with another
battery pack.
b) Use power tools only with specifically designated battery packs. Use of any other
battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away from other metal objects, like
paper clips, coins, keys, nails, screws, or other small metal objects, that can
make a connection from one terminal to another. Shorting the battery terminals
together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the battery may cause irritation or
burns.
6) SERVICE
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
Nailer Safety Warnings
• Always assume that the tool contains fasteners. Careless handling of the nailer can
result in unexpected firing of fasteners and personal injury.
• Do not point the tool towards yourself or anyone nearby. Unexpected triggering will
discharge a fastener causing an injury.
• Do not actuate the tool unless the tool is placed firmly against the workpiece. If
the tool is not in contact with the workpiece, the fastener may be deflected away from your
target.
Produktspecifikationer
| Varumärke: | DeWalt |
| Kategori: | Häftapparat |
| Modell: | DCN690B |
| Färg på produkten: | Zwart |
| Vikt: | - g |
| Bredd: | 339 mm |
| Djup: | 239.5 mm |
| AC-adapterfrekvens: | 50 - 60 Hz |
| AC-adapterns inspänning: | 100 - 240 V |
| Blåtand: | Nee |
| Skärm diagonal: | 14 " |
| Upplösning: | 1366 x 768 Pixels |
| Pekskärm: | Nee |
| Original bildförhållande: | 16:9 |
| Processorfrekvens: | 1.6 GHz |
| Processorfamilj: | Intel® Core™ i5 |
| Processormodel: | i5-4200U |
| Antal processorkärnor: | 2 |
| Wi-Fi-standarder: | 802.11a, 802.11b, 802.11g |
| Vormfaktor: | Clamshell |
| Inkluderar operativsystem: | Windows 7 Professional |
| Ethernet LAN: | Ja |
| Integrerad minneskortläsare: | Ja |
| Kompatibla minneskort: | MMC, SD, SDHC, SDXC |
| Ljudsystem: | SonicMaster Lite |
| Processor litografi: | 22 nm |
| fingeravtrycksläsare: | Ja |
| Inkluderar AC-adapter: | Ja |
| LED-bakgrundsbelysning: | Ja |
| Antal USB 2.0-portar: | 2 |
| VGA (D-Sub) port(ar): | 1 |
| Antal HDMI-portar: | 1 |
| Mikrofon, linjeingång: | Nee |
| DVI-port: | Nee |
| Antal Ethernet LAN (RJ-45)-portar: | 1 |
| Monteringsalternativ för kabellås: | Ja |
| Kabellåsspårtyp: | Kensington |
| Lösenordsskydd: | Ja |
| Certifiering: | UL, TUV, CE Marking Compliance, FCC Compliance, BSMI, Australia C-TICK / NZ A-Tick Compliance, CCC, GOST-R, CB, EPEAT, Energy star, IDA, CECP, WEEE, Erp 2013, RoHS |
| AC-adapter, ström: | 65 W |
| HD typ: | HD |
| Inbyggd mikrofon: | Ja |
| Internminne: | 8 GB |
| Förvarings media: | HDD |
| Batteritid/batteritid: | - uur |
| Internminnestyp: | DDR3L-SDRAM |
| Password bescherming: | BIOS, HDD, User |
| Hållbarhetscertifikat: | RoHS, ENERGY STAR |
| Intel® Wireless Display (Intel® WiDi): | Ja |
| Antal portar USB 3.2 Gen 1 (3.1 Gen 1) Typ A: | 2 |
| Processoruttag: | BGA 1168 |
| Stepping: | C0 |
| Systembuss: | - GT/s |
| Processor antal trådar: | 4 |
| PCI Express-kortplatsversion: | 2.0 |
| Processorns driftlägen: | 64-bit |
| Processorns cache: | 3 MB |
| Tjunction: | 100 °C |
| Busstyp: | DMI2 |
| PCI Express-konfigurationer: | 1x4, 2x4 |
| Thermal Design Power (TDP): | 15 W |
| Kodnamnsprocessor: | Haswell |
| Maximalt antal PCI Express-linjer: | 12 |
| Typ av processorcache: | Smart Cache |
| ECC stöds av processor: | Nee |
| Processorfabrikant: | Intel |
| Operativsystems arkitektur: | 64-bit |
| Maximalt internminne: | 16 GB |
| Total lagringskapacitet: | 500 GB |
| Typ av optisk enhet: | DVD Super Multi |
| Inbyggd grafikadapter: | Ja |
| Separat grafikadapter: | Ja |
| Familjens inbyggda grafikadapter: | Intel® HD Graphics |
| Inbyggd grafikadaptermodell: | Intel® HD Graphics 4400 |
| Grundläggande frekvens inbyggd grafikadapter: | 200 MHz |
| Inbyggd grafikadapter dynamisk frekvens (max): | 1000 MHz |
| Inbyggt grafikkort-ID: | 0xA16 |
| Maximalt minne inbyggd grafikadapter: | 1.74 GB |
| Inbyggd grafikadapter DirectX-version: | 12 |
| Fram kamera: | Ja |
| Numerisk knappsats: | Nee |
| Instruktionsuppsättningar som stöds: | AVX 2.0 |
| Intel® My WiFi Technology (Intel® MWT): | Ja |
| Intel® Hyper Threading Technology (Intel® HT Technology): | Ja |
| Intel® Turbo Boost-teknik: | 2.0 |
| Intel® Quick Sync-videoteknik: | Ja |
| Intel® InTru™ 3D-teknik: | Ja |
| Intel® Clear Video HD-teknik (Intel® CVT HD): | Ja |
| Intel® Insider™: | Ja |
| Intel® Flex Memory Access: | Nee |
| Intel® AES nya instruktioner (Intel® AES-NI): | Ja |
| Förbättrad Intel SpeedStep-teknik: | Ja |
| Kör Disable Bit: | Ja |
| Idle stater: | Ja |
| Termisk övervakningsteknik: | Ja |
| CPU-konfiguration (max): | 1 |
| Intel® Enhanced Halt State: | Ja |
| Intel® Clear Video Technology för mobila internetenheter (Intel® CVT för MID): | Nee |
| Intel® VT-x med utökade sidtabeller (EPT): | Ja |
| Inbyggda alternativ tillgängliga: | Nee |
| Intel® Secure Key: | Ja |
| Intel® 64: | Ja |
| Intel® Virtualization Technology for Directed I/O (VT-d): | Nee |
| Intel® Clear Video-teknik: | Nee |
| Intel® Virtualization Technology (VT-x): | Ja |
| Processorpaketstorlek: | 40 x 24 x 1.5 mm |
| Konfliktfri processor: | Ja |
| Intel® Identity Protection Technology (Intel® IPT): | Ja |
| Versie Intel® Identity Protection Technology: | 1.00 |
| Versie Intel® Secure Key Technology: | 1.00 |
| ARK ID-processor: | 75459 |
| Intel® Trusted Execution Technology: | Nee |
| Intel® TSX: | Nee |
| Intel® TSX-NI-version: | 0.00 |
| Intel® Anti-Theft Technology (Intel® AT): | Ja |
| Intel® Smart Connect-teknik: | Ja |
| Anslutning till basstation: | Nee |
| Kombinerad hörlurs/mikrofonport: | Ja |
| SmartCard-kortplats: | Nee |
| Maximal processorturbofrekvens: | 2.6 GHz |
| Processorkod: | SR170 |
| Diskret grafikadaptermodell: | NVIDIA® GeForce® GT 820M |
| Pekdon: | Touchpad |
| Windows-tangenter: | Ja |
| AC-adapter, utspänning: | 19 V |
| AC-adapter, utström: | 3.42 A |
| Klockhastighetsminne: | 1600 MHz |
| Antalet installerade hårddiskar: | 1 |
| HDD kapacitet: | 500 GB |
| FSB-paritet: | Nee |
| Bussprocessor på framsidan: | - MHz |
| Intel® efterfrågebaserad växling: | Nee |
| Typ av laddningsport: | DC-in ingang |
| Typ CardBus PCMCIA-slot: | Nee |
| Processorserie: | Intel Core i5-4200 Mobile series |
| ExpressCard-kortplats: | Nee |
| S/PDIF-utgång: | Nee |
| Höjd (fram): | 19.5 mm |
| Höjd (bak): | - mm |
| Intel® Dual Display Capable Technology: | Nee |
| Intel® FDI-teknik: | Nee |
| Intel® Rapid Storage Technology: | Ja |
| Intel® Fast Memory Access: | Nee |
| Intel® segmenttaggning: | Small Business |
| Intel® High Definition Audio (Intel® HD Audio): | Ja |
| Versie Intel® Smart Connect-teknik: | 1.00 |
| Antal SATA III-kontakter: | 4 |
| Reparera operativsystem: | Windows 8 Pro |
| Intel® ME Firmware-version: | 9.5 |
| Wifi: | Ja |
| Typ produkt: | Notebook |
| Intel® Matrix Storage Technology (Intel® MST): | Nee |
| Processorgenerering: | Vierde generatie Intel® Core™ i5 |
| Totalt antal SATA-kontakter: | 4 |
Behöver du hjälp?
Om du behöver hjälp med DeWalt DCN690B ställ en fråga nedan och andra användare kommer att svara dig
Häftapparat DeWalt Manualer
1 Oktober 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
23 September 2024
Häftapparat Manualer
- Makita
- Porter-Cable
- Rapid
- Fellowes
- Milwaukee
- Leitz
- Werckmann
- Mannesmann
- Gude
- Craftsman
- Parkside
- Klein Tools
- Smart365
- CTA Digital
- Vonroc
Nyaste Häftapparat Manualer
4 Mars 2025
16 Januari 2025
17 December 2024
9 December 2024
9 December 2024
7 December 2024
15 Oktober 2024
2 Oktober 2024
24 September 2024
24 September 2024