DeWalt DDF211022 Bruksanvisning

DeWalt Inte kategoriserad DDF211022

Läs gratis den bruksanvisning för DeWalt DDF211022 (32 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 9 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 5 recensioner. Har du en fråga om DeWalt DDF211022 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/32

Model P2201 Cat. No. DDF211022P

P2201

OPERATING INSTRUCTION MANUAL

DO NOT OPERATE THE P2201 TOOL UNTIL

YOU HAVE READ THIS MANUAL AND RECEIVED THE PROPER TRAINING

ACCORDING TO ANSI STANDARD A 10.3-1995.

™

PRIOR TO OPERATING THE P2201 TOOL,

STUDY THIS MANUAL CAREFULLY AND DEVELOP A THOROUGH

UNDERSTANDING OF THE CONTENTS.

PROPER TRAINING ACCORDING TO THE CURRENT ANSI

STANDARD A 10.3, SAFETY REQUIREMENTS FOR POWDER

ACTUATED FASTENING SYSTEMS MUST BE COMPLETED AND

A DEWALT QUALIFIED OPERATOR CARD MUST BE OBTAINED

PRIOR TO OPERATION OF THE TOOL. STATE, LOCAL, OR

OTHER REGULATIONS SHOULD ALSO BE FOLLOWED. LAWS,

REGULATIONS, AND STANDARDS REGARDING THE USE

OF POWDER ACTUATED TOOLS MAY PERIODICALLY BE

REVISED. ANY SUCH REVISIONS MAY CHANGE THE SAFETY

AND OPERATING PROCEDURES DESCRIBED IN THIS MANUAL.

DEWALT, INC. IS NOT RESPONSIBLE FOR ANY SUCH REVISIONS

WHICH OCCUR AFTER PUBLICATION OF THIS MANUAL. IT IS THE

RESPONSIBILITY OF THE USER TO MAINTAIN FAMILIARITY WITH

THE CURRENT LAWS, REGULATIONS, AND STANDARDS THAT

APPLY TO THE POWDER ACTUATED TOOL.

TO AVOID SERIOUS INJURY OR DEATH:

NEVER CLOSE TOOL WITH ANY PART OF HAND OVER MUZZLE END.

OPERATORS AND BYSTANDERS MUST WEAR

EYE AND HEARING PROTECTION.

R2200

R22

ALWAYS

ASSUME

TOOL IS LOADED.

DO NOT PLACE A

FINGER ON THE

TRIGGER

OF LOADED TOOL UNTIL MUZZLE END IS AGAINST WORK

SURFACE AND YOU ARE READY TO MAKE A FASTENING. NEVER

PLACE YOUR HAND OVER THE MUZZLE WITH A POWDER LOAD IN

THE TOOL. IF THE TOOL ACCIDENTALLY DISCHARGES THE PISTON

OR FASTENER MAY PENETRATE YOUR HAND RESULTING IN

SERIOUS INJURY.

TOOL OPERATION MUST READ AND UNDERSTAND

THE ENTIRE TOOL MANUAL AND MUST COMPLETE

THE OPERATOR’S EXAM ON THE LAST PAGE. THE

TOOL WARRANTY WILL NOT BE VALID UNTIL THE TEST IS

RECEIVED, WITH A COPY OF YOUR RECEIPT, AND REVIEWED

BY DEWALT, INC.

Warranty

Three Year Limited Warranty

DEWALT will repair, without charge, any defects due to faulty

materials or workmanship for three years from the date of

purchase. This warranty does not cover part failure due to

normal wear or tool abuse. For further detail of warranty

coverage and warranty repair information, visit www.dewalt.

com or call 1-800-4-DEWALT (1-800-433-9258). This

warranty does not apply to accessories or damage caused

where repairs have been made or attempted by others. This

warranty gives you specific legal rights any you may have

other rights which vary in certain states or provinces.

In addition to the warranty, DEWALT tools are covered by our:

1 YEAR FREE SERVICE

DEWALT will maintain the tool and replace worn parts caused

by normal use, for free, any time during the first year after

purchase.

90 DAY MONEY BACK GUARANTEE

If you are not completely satisfied with the performance of

your DEWALT Powder Actuated Tool for any reason, you can

return it within 90 days from the date of purchase with a

receipt for a full refund – no questions asked.

FREE WARNING LABEL REPLACEMENT:

If your warning labels become illegible or are missing call

1-800-4-DEWALT (1-800-433-9258) for a free replacement.

Introduction

Thank you for purchasing the D WALT P2201 low velocity E

powder actuated tool. This tool will provide you with excellent

performance provided the steps for proper operation and

maintenance are followed. Powder actuated fastening

systems can provide a cost effective method of attaching

fixtures for light duty, static load conditions. The systems

provided by DEWALT consist of specially designed fasteners,

installation tools, and powder loads which are designed to

function in combination to provide optimum performance.

While powder actuated tools can provide one of the fastest

and economical means of fastening, they can also be

dangerous if they are not operated properly.

Prior to operating the P2201 tool, you must be properly

trained in the operation and maintenance of this tool and be

issued a DEWALT Qualified Operator Card. When using the

tool, you must have this card in your possession. As part

of the training process, you should read and understand

the contents of this instruction manual especially the safety

Low Velocity Powder

Actuated Fastening Tool

POW2273_manual_P2201_dewalt.indd 1 3/10/14 12:41 PM

Produktspecifikationer

Varumärke:	DeWalt
Kategori:	Inte kategoriserad
Modell:	DDF211022
Färg på produkten:	Zwart
Vikt:	1033 g
LED-indikatorer:	LAN, Power, WAN
På / Av knapp:	Ja
Processorfrekvens:	1700 MHz
Antal processorkärnor:	4
Wi-Fi-standarder:	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax), Wi-Fi 6E (802.11ax)
USB uttag:	Ja
Ethernet LAN:	Ja
Typ av strömkälla:	AC, DC
Medföljande kablar:	LAN (RJ-45)
Snabbstartsguide:	Ja
Garantikort:	Ja
Inkluderar AC-adapter:	Ja
Antal Ethernet LAN (RJ-45)-portar:	5
Anslutning för nätadapter:	Ja
Internminne:	512 MB
Fungerar med Amazon Alexa:	Ja
Typ processor:	Ja
SIM-kortplats:	Nee
3G/4G USB-modemkompatibilitet:	Ja
Wifi-band:	Tri-band (2,4 GHz / 5 GHz / 6 GHz)
WiFi-standard:	Wi-Fi 6E (802.11ax)
WLAN-dataöverföringshastighet (max):	4804 Mbit/s
WLAN-dataöverföringshastighet (första bandet):	574 Mbit/s
WLAN-dataöverföringshastighet (andra bandet):	4804 Mbit/s
Ethernet LAN, dataöverföringshastigheter:	10,100,1000 Mbit/s
Kabelteknik:	10/100/1000Base-T(X)
Säkerhetsalgoritmer som stöds:	SSH, WPA, WPA-Enterprise, WPA2, WPA2-Enterprise, WPA3, WPS
Antenner kvantitet:	6
Firmware-uppgradering möjlig:	Ja
Webbaserad hantering:	Ja
Återställningsknapp:	Ja
MAC-adressfiltrering:	Ja
Ethernet WAN:	Ja
Brandvägg:	Ja
Utström:	3 A
Spännande:	12 V
Flashminne:	256 MB
DHCP-server:	Ja
Föräldratillsyn:	Ja
Quality of Service (QoS):	Ja
Nätverksadressöversättning (NAT):	Ja
DMZ-stöd:	Ja
Gästtillgång:	Ja
DSL WAN:	Nee
WPS-tryckknappssäkerhet:	Ja
URL-filtrering:	Ja
Löstagbara antenner:	Nee
Typ av WAN-anslutning:	RJ-45
Vakna på LAN:	Ja
AC-ingångsspänning:	110 - 240 V
AC-ingångsfrekvens:	50/60 Hz
Typ produkt:	Router om neer te zetten
MU-MIMO-teknik:	Ja
Intelligent mesh-teknik:	Ja
WLAN-dataöverföringshastighet (tredje bandet):	2402 Mbit/s
Inbyggd FTP-server:	Ja
VPN-egenskaper:	VPN Client L2TP\nVPN Client OVPN\nVPN Client PPTP\nVPN Client WireGuard\nVPN Server IPSec\nVPN Server OVPN\nVPN Server PPTP\nVPN Server WireGuard\nVPN Fusion
Antenndesign:	Extern
Dynamisk DNS (DDNS):	Ja
NAT-funktionalitet:	PPTP, L2TP, IPSec, RTSP, H.323, SIP Passthrough, PPPoE relay
Systemhändelselogg:	Ja
Port forwarding:	Ja
Dålig aktivering:	Ja
Antal gästnätverk (5 GHz):	3
Antal gästnätverk (2,4 GHz):	3
VPN-server:	IPSec, OVPN, PPTP
Bandbreddskontroll:	Ja
Stöd för Samba (lagring).:	Ja
Mediaserver:	Ja