DeWalt DW432 Bruksanvisning
Läs gratis den bruksanvisning för DeWalt DW432 (6 sidor) i kategorin Sander. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 4.5 recensioner. Har du en fråga om DeWalt DW432 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/6
INSTRUCTION MANUAL
GUIDE D'UTILISATION
MANUAL DE INSTRUCCIONES
DW432 3"x 21" Belt Sander
DW433 3"x 21" Variable Speed Belt Sander
DW432 Ponceuse à courroie (7,6 x 53,3 cm ou 3 x 21 po)
DW433 Ponceuse à courroie à vitesse variable (7,6 x 53,3 cm ou 3 po x 21 po)
DW432 3" x 21" Lijadora de correa
DW433 3" x 21" Lijadora de correa de velocidad variable
ADVERTENCIA:
1-800-4-DEWALT (1-800-433-9258)
SAVE THESE INSTRUCTIONS
WARNING! Read and understand all instructions including that
provided with attachment and accessories.
GENERAL SAFETY INSTRUCTIONS
WORK AREA
Keep your work area clean and well lit.
Do not operate power tools in explosive atmospheres, such as in the presence of flam-
mable liquids, gases, or dust.
Keep bystanders, children, and visitors away while operating a power tool.
ELECTRICAL SAFETY
Grounded tools must be plugged into an outlet properly installed and grounded in
accordance with all codes and ordinances. Never remove the grounding prong or
modify the plug in any way. Do not use any adaptor plugs.
Double insulated tools are equipped with a polarized plug (one blade is wider than the
other.) This plug will fit in a polarized outlet only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to
install a polarized outlet. Do not change the plug in any way.
Avoid body contact with grounded surfaces such as pipes, radiators, ranges and
refrigerators.
Don’t expose power tools to rain or wet conditions.
Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an
outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged
cords immediately.
When operating a power tool outside, use an outdoor extension cord marked “W-A”
or “W.”
Minimum Gage for Cord Sets
Volts Total Length of Cord in Feet
Ampere Rating
PERSONAL SAFETY
Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use tool while tired or under the influence of drugs, alcohol, or medica-
tion.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair,
clothing, and gloves away from moving parts.
• Avoid accidental starting. Be sure switch is off before plugging in.
Remove adjusting keys or wrenches before turning the tool on.
Do not overreach. Keep proper footing and balance at all times.
Use safety equipment. Always wear eye protection.
TOOL USE AND CARE
Use clamps or other practical way to secure and support the workpiece to a stable
platform.
Do not force tool. Use the correct tool for your application.
Do not use tool if switch does not turn it on or off.
Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing the tool.
Store idle tools out of reach of children and other untrained persons.
Maintain tools with care. Keep cutting tools sharp and clean.
Check for misalignment or binding of moving parts, breakage of parts, and any other
condition that may affect the tool’s operation.
Use only accessories that are recommended by the manufacturer for your model.
SERVICE
Tool service must be performed only by qualified repair personnel.
When servicing a tool, use only identical replacement parts. Follow instructions in
the Maintenance section of this manual.
ADDITIONAL SPECIFIC SAFETY INSTRUCTIONS FOR
BELT SANDERS
Hold tool by insulated gripping surfaces when performing an operation where the cut-
ting tool may contact hidden wiring or its own cord.
Do not sand metal of any kind with your belt sander.
Do not wet sand with this sander.
Empty dust bag frequently.
Do not operate this tool for long periods of time.
Clean out your tool often, especially after heavy use.
CAUTION: Wear appropriate personal hearing protection during use.
WARNING:
Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and
other construction activities. Wear protective clothing and wash exposed areas with
soap and water.
CAUTION:
Precautions To Take When Sanding Paint
PERSONAL SAFETY
ENVIRONMENTAL SAFETY
CLEANING AND DISPOSAL
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-DEWALT • www.dewalt.com
Produktspecifikationer
| Varumärke: | DeWalt |
| Kategori: | Sander |
| Modell: | DW432 |
Behöver du hjälp?
Om du behöver hjälp med DeWalt DW432 ställ en fråga nedan och andra användare kommer att svara dig
Sander DeWalt Manualer
22 September 2024
13 September 2024
28 Augusti 2024
27 Augusti 2024
26 Augusti 2024
25 Augusti 2024
24 Augusti 2024
24 Augusti 2024
23 Augusti 2024
21 Augusti 2024
Sander Manualer
- Arendo
- Silverline
- Proviel
- Black Decker
- Fein
- Milwaukee
- Duro Pro
- Powertec
- THUN
- Rikon
- Bruder Mannesmann
- Kinzo
- Cocraft
- Stanley
- Craftsman
Nyaste Sander Manualer
29 Mars 2025
29 Mars 2025
28 Mars 2025
28 Mars 2025
19 Februari 2025
17 Februari 2025
13 Februari 2025
12 Januari 2025
7 Januari 2025
2 Januari 2025