DeWalt DW443 Bruksanvisning

DeWalt Slipmaskin DW443

Läs nedan 📖 manual på svenska för DeWalt DW443 (36 sidor) i kategorin Slipmaskin. Denna guide var användbar för 3 personer och betygsatt med 5.0 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/36

INSTRUCTION MANUAL

GUIDE D’UTILISATION

MANUAL DE INSTRUCCIONES

DW441, DW442, DW443, DW444

Right Angle Random Orbit Sanders

Ponceuses orbitales excentriques à angle droit

Lijadoras orbitales de movimiento múltiple de ángulo recto

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA

DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES

DE USAR EL PRODUCTO.

If you have questions or comments, contact us.

Pour toute question ou tout commentaire, nous contacter.

Si tiene dudas o comentarios, contáctenos.

1-800-4-DEWALT • www.dewalt.com

English

WARNING! Read all instructions. Failure to follow all

instructions listed below may result in electric shock, fire

and/or serious injury. The term “power tool” in all of the warn-

ings listed below refers to your mains-operated (corded) power

tool or battery-operated (cordless) power tool.

SAVE THESE INSTRUCTIONS

1) WORK AREA SAFETY

a) Keep work area clean and well lit. Cluttered or dark areas

invite accidents.

b) Do not operate power tools in explosive atmospheres, such

as in the presence of flammable liquids, gases or dust.

Power tools create sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while operating a

power tool. Distractions can cause you to lose control.

2) ELECTRICAL SAFETY

a) Power tool plugs must match the outlet. Never modify the

plug in any way. Do not use any adapter plugs with earthed

(grounded) power tools. Unmodified plugs and matching out-

lets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces

such as pipes, radiators, ranges and refrigerators. There

is an increased risk of electric shock if your body is earthed or

grounded.

c) Do not expose power tools to rain or wet conditions. Water

entering a power tool will increase the risk of electric shock

d) Do not abuse the cord. Never use the cord for carrying,

pulling or unplugging the power tool. Keep cord away

from heat, oil, sharp edges or moving parts. Damaged or

entangled cords increase the risk of electric shock. Replace or

repair damaged cords. Make sure your extension cord is in good

condition. Use only 3-wire extension cords that have 3-prong

grounding-type plugs and 3-pole receptacles that accept the

tool’s plug.

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR

ANY D

EWALT TOOL, CALL US TOLL FREE AT:

1-800-4-DEWALT (1-800-433-9258)

SANDING PAD

(HOOK AND LOOP - DW442 AND DW443)

(PSA- PRESSURE SENSITIVE ADHESIVE - DW441 AND DW444)

DUST BAG

SPEED CONTROL DIAL

(DW443 AND DW444)

ON/OFF SWITCH

SHROUD

Produktspecifikationer

Varumärke:	DeWalt
Kategori:	Slipmaskin
Modell:	DW443
Vikt:	2700 g
Djup:	320 mm
Höjd:	125 mm
Tomgångsvarvtal (max):	7600 RPM
Slipskivans diameter:	150 mm
Excentricitet:	2.5 mm
Effekt:	530 W
Strömkälla:	AC
Sliprörelsediameter:	5 mm
Oscillationshastighet (min):	4000 OPM
Oscillationshastighet (max):	6800 OPM