DeWalt DWE7491RS Bruksanvisning

DeWalt Sågmaskin DWE7491RS

Läs gratis den bruksanvisning för DeWalt DWE7491RS (56 sidor) i kategorin Sågmaskin. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 1.5 recensioner. Har du en fråga om DeWalt DWE7491RS eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/56

DWE7490, DWE7491

Heavy-Duty 10" (254 mm) Job Site Table Saw

Scie de table industrielle de chantier de 254mm (10po)

Sierra de banco para el lugar de trabajo de 254 mm (10 pulg.) de alta resistencia

INSTRUCTION MANUAL

GUIDE D’UTILISATION

MANUAL DE INSTRUCCIONES

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE

GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE

USAR EL PRODUCTO.

Before returning this product call

1-800-4-DEWALT

IF YOU SHOULD EXPERIENCE A PROBLEM WITH YOUR D

WALT PURCHASE,

CALL 1-800-4-DEWALT

IN MOST CASES, A D

WALT REPRESENTATIVE CAN RESOLVE

YOUR PROBLEM OVER THE PHONE.

IF YOU HAVE A SUGGESTION OR COMMENT, GIVE US A CALL.

YOUR FEEDBACK IS VITAL TO THE SUCCESS OF D

WALT’S QUALITY

IMPROVEMENT PROGRAM.

Questions? Visit us at www.dewalt.com

Des questions ? Rendez nous visite à www.dewalt.com

¿Tiene preguntas? Visítenos en www.dewalt.com

English

Deﬁ nitions: Safety Guidelines

The definitions below describe the level of severity for each signal word. Please read the

manual and pay attention to these symbols.

DANGER: will Indicates an imminently hazardous situation which, if not avoided,

result in death or serious injury.

WARNING: could Indicates a potentially hazardous situation which, if not avoided,

result in death or serious injury.

CAUTION: may Indicates a potentially hazardous situation which, if not avoided,

result in minor or moderate injury.

NOTICE: Indicates a practice which, if not avoided, not related to personal injury

may result in property damage.

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY D WALT TOOL, E

CALL US TOLL FREE AT: 1-800-4-DEWALT (1-800-433-9258).

WARNING: To reduce the risk of injury, read the instruction manual.

General Safety Rules

WARNING: Read all instructions before operating product. Failure to follow all

instructions listed below may result in electric shock, fire and/or serious injury.

SAVE THESE INSTRUCTIONS

WARNING: FOLLOW ALL WIRING CODES and recommended electrical connections to

prevent shock or electrocution.

Double Insulation

If saw is of double-insulated construction, read the following instructions.

This symbol represents double insulated construction. Double insulated tools are

constructed throughout with two separate layers of electrical insulation or one double

thickness of insulation between you and the tool’s electrical system. Tools built with this

insulation system are not intended to be grounded. As a result, your tool is equipped with a

two prong plug which permits you to use extension cords without concern for maintaining a

ground connection. Repair or replace damaged or worn cord immediately.

NOTE: Double insulation does not take the place of normal safety precautions when

operating this tool. The insulation system is for added protection against injury resulting from

a possible electrical insulation failure within the tool.

POLARIZED PLUGS

To reduce the risk of electric shock, this equipment has a polarized plug

(one blade is wider than the other). This plug will fit in a polarized outlet

only one way. If the plug does not fit fully into the outlet, reverse the plug.

If it still does not fit, contact a qualified electrician to install the proper

outlet. Do not change the plug in any way.

Important Safety Instructions

• TO REDUCE THE RISK OF KICKBACK AND OTHER INJURIES, use all components

of the guarding system (blade guard assembly, riving knife and anti-kickback) for every

operation for which they can be used including all thru-cutting.

• REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that

keys and adjusting wrenches are removed from spindle before turning tool on. Tools, scrap

pieces, and other debris can be thrown at high speed, causing injury.

• KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.

• DO NOT USE THE MACHINE IN A DANGEROUS ENVIRONMENT. The use of power

tools in damp or wet locations or in rain can cause shock or electrocution. Keep your work

area well-lit to avoid tripping or placing arms, hands, and fingers in danger.

• KEEP CHILDREN AWAY. All visitors should be kept at a safe distance from work area.

Your shop is a potentially dangerous environment.

• MAKE WORKSHOP CHILDPROOF with padlocks, master switches, or by removing

starter keys. The unauthorized start-up of a machine by a child or visitor may result in

injury.

• DO NOT FORCE TOOL. It will do the job better and be safer at the rate for which it was

designed.

• USE THE RIGHT TOOL. Don’t force tool or attachment to do a job for which it was not

designed. Using the incorrect tool or attachment may result in personal injury.

• DO NOT OVERREACH. Keep proper footing and balance at all times. Loss of balance

may cause personal injury. Do not attempt to retrieve materials near the blade on the saw

table while the blade is spinning.

• MAINTAIN TOOLS WITH CARE. Keep blades sharp and clean for best and safest

performance. Follow instructions for lubricating and changing accessories. Poorly

maintained blades and machines can further damage the blade or machine and/or

cause injury.

• USE PROPER EXTENSION CORD. Make sure your extension cord is in good

condition. When using an extension cord, be sure to use one heavy enough to carry

the current your product will draw. An undersized cord will cause a drop in line voltage

resulting in loss of power and overheating.The following table shows the correct size to

use depending on cord length and nameplate ampere rating. If in doubt, use the next

heavier gauge. The smaller the gauge number, the heavier the cord.

Minimum Gauge for Cord Sets

Ampere Rating

Volts Total Length of Cord in Feet (meters)

120 V 25 (7.6) 50 (15.2) 100 (30.5) 150 (45.7)

240 V 50 (15.2) 100 (30.5) 200 (61.0) 300 (91.4)

Than

Not More

Than AWG

0 6 18 16 16 14

6 10 18 16 14 12

10 12 16 16 14 12

12 16 14 12 Not Recommended

• WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neckties, rings,

bracelets, or other jewelry which may get caught in moving parts. Nonslip footwear is

recommended. Wear protective hair covering to contain long hair.

• ALWAYS USE SAFETY GLASSES. Also use face or dust mask if cutting operation

is dusty. Everyday eyeglasses only have impact resistant lenses, they are NOT safety

glasses.

• SECURE WORK. Use clamps to hold work when practical (such as when using a zero

clearance insert/throat plate). It's safer than using your hand and it frees both hands to

operate tool.

• TURN THE MACHINE “OFF”, AND DISCONNECT THE MACHINE FROM THE

POWER SOURCE before installing or removing accessories, before adjusting or

changing set-ups, when making repairs or changing locations. Do not touch the plug’s

metal prongs when unplugging or plugging in the cord. An accidental start-up can cause

injury.

Produktspecifikationer

Varumärke:	DeWalt
Kategori:	Sågmaskin
Modell:	DWE7491RS
Färg på produkten:	Wit
Vikt:	1200 g
Bredd:	234 mm
Höjd:	52 mm
Snäll:	IP-beveiligingscamera
Internationell säkerhetskod (IP):	IP66
Mobila operativsystem som stöds:	Android, iOS
Videoformat som stöds:	H.264
Vormfaktor:	Rond
USB uttag:	Ja
Placeringsstöd:	Binnen & buiten
Anslutningsteknik:	Bedraad
Ethernet LAN:	Ja
Monteringsmetod:	Muur
Videolägen som stöds:	720p
Maximal upplösning:	1280 x 720 Pixels
Videokomprimeringsformat:	H.264
Strömutgång (volt):	12
Minimal belysning:	- Lux
Antal kameror:	8
Nattseende:	Ja
LED-typ:	IR
Video rörelsedetektering:	Ja
Antal Ethernet LAN (RJ-45)-portar:	1
Certifiering:	FCC, IC, CE, RoHS, IP66
Optisk sensorstorlek:	1/4 "
Bildsensortyp:	CMOS
Gränssnitt:	RJ-45
Grafikupplösningar som stöds:	1280 x 720 (HD 720)
Hållbarhetscertifikat:	RoHS
Plug and play:	Ja
Kabelteknik:	10/100Base-T(X)
Stöder Windows:	Ja
Längd:	234 mm
Förvaringstemperatur:	-20 - 60 °C
Säkerhetsfunktioner:	Waterbestendig
Stöder Mac-operativsystem:	Ja
Förvaringsfuktighet:	0 - 90 procent
Återställningsknapp:	Ja
Språk som stöds:	CZE, DEU, DUT, ENG, ESP, FRE, HUN, ITA, POL, POR, RUS
Dag/nattläge:	Ja
Maximalt antal bländare:	2
Väderbeständig:	Ja
Night vision scope:	20 m
Antal språk:	13
Wide Dynamic Range (WDR):	Ja
Strömförbrukning (typiskt):	12 W
Drifttemperatur (TT):	-10 - 55 °C
Relativ luftfuktighet i drift (VV):	20 - 85 procent
Linsens betraktningsvinkel, horisontell:	60 °
Betraktningsvinkellins, diagonal:	70 °