DeWalt DWMT70774 Bruksanvisning

DeWalt Skruvmaskin DWMT70774

Läs gratis den bruksanvisning för DeWalt DWMT70774 (46 sidor) i kategorin Skruvmaskin. Guiden har ansetts hjälpsam av 9 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 5 recensioner. Har du en fråga om DeWalt DWMT70774 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/46

DWMT70774

1/2" Impact Wrench Medium Duty

Clé à chocs de 12,7 mm (1/2 po) de gamme moyenne

Llave de impacto de 12,7 mm (1/2”) para servicio mediano

INSTRUCTION MANUAL

GUIDE D’UTILISATION

MANUAL DE INSTRUCCIONES

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA

DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES

DE USAR EL PRODUCTO.

If you have questions or comments, contact us.

Pour toute question ou tout commentaire, nous contacter.

Si tiene dudas o comentarios, contáctenos.

1-800-4-DeWALT • www.dewalt.com

English

A. 1/2" Square Drive

B. Trigger

C. Ergonomic Handle

D. 1/4” Air Inlet

E. Exhaust

SPECIFICATIONS

MODEL

DWMT70774

SQUARE DRIVE

1/2"

CLUTCH TYPE

Twin Hammer

MAXIMUM TORQUE (REVERSE)

600 Ft.Lbs (810 Nm)

FREE SPEED (@90PSI)

7300 RPM

BLOWS PER MINUTE

1000 BPM

NET WEIGHT

4.5 LBS (2Kg.)

EXHAUST TYPE

Handle

AVERAGE AIR CONSUMPTION

(@90PSI)

36 SCFM (17 L/s)

5.1 CFM (2.6L/s)

AVERAGE AIR CONSUMPTION

AT LOAD

23.3 SCFM (11L/s)

3.3 CFM (1.6L/s)

AIR INTLET SIZE

1/4" NPT(F)

RECOMMENDED HOSE SIZE

3/8" (10MM)

MAX. AIR PRESSURE

90 PSI

DWMT70774

1/2" IMPACT WRENCH MEDIUM DUTY

F. Shock Resistant Housing

Bumpers

G. Composite Body

H. Twin Hammer Mechanism

I. Forward/Reverse Adjustable

Power Dial

FIG.1

English

Denitions: Safety Guidelines

The definitions below describe the level of severity

for each signal word. Please read the manual and pay

attention to these symbols.

DANGER: Indicates an imminently hazardous

situation which, if not avoided, result in will death

or serious injury.

WARNING: Indicates a potentially hazardous

situation which, if not avoided, result in could death

or serious injury.

CAUTION: Indicates a potentially hazardous

situation which, if not avoided, result in may minor

or moderate injury.

CAUTION: Used without the safety alert symbol

indicates a potentially hazardous situation which,

if not avoided, result in may property damage.

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT

THIS OR ANY D

WALT TOOL, CALL US TOLL FREE AT:

1-800-4-D

WaLT (1-800-433-9258)

IMPORTANT SAFETY INSTRUCTIONS

WARNING: Some dust created by power sanding, sawing,

grinding, drilling, and other construction activities contains chemicals

known to the State of California to cause cancer, birth defects or

other reproductive harm. Some example of these chemicals are:

 • Leadfromlead-basedpaints

 • Crystallinesilicafrombricksandcement

and other masonry products

 • Arsenicandchromiumfromchemically-treatedlumber

Your risk from these exposures varies, depending on how often you

do this type of work. To reduce your exposure to these chemicals:

work in a well ventilated area, and work with approved safety

equipment, al ways wear approved, OSHA/MSHA/NIOSH

properly fit ting face mask or res pi ra tor when us ing such tools.

When using air tools, basic safety precautions should always be

followed to reduce the risk of personal injury.

WARNING: This product contains chemicals, known to the

State of California to cause cancer, and birth defects or other

reproductive harm. Wash hands after handling.

SAVE THESE INSTRUCTIONS

WARNING:

Improper operation or maintenance of this product

could result in serious injury and property damage.

Read and understand all warnings and operating

instructions before using this equipment. When using

air tools, basic safety precautions should always be

followed to reduce the risk of personal injury.

WARNING:

Read and understand this instruction manual and tool labels

before installing, operating or servicing this tool. Keep these

instructions in a safe accessible place.

Operators and others in work area must wear ANSI Z87.1 CAN/

CSA Z94.3 approved safety glasses with side shields.

Operators and others in work area must wear ear protection.

Oil daily for optimal performance.

Produktspecifikationer

Varumärke:	DeWalt
Kategori:	Skruvmaskin
Modell:	DWMT70774
Enhetsplacering:	Vrijstaand
Färg på produkten:	Wit
Dörrgångjärn:	Links
Inbyggd display:	Nee
Vikt:	71000 g
Bredd:	600 mm
Djup:	732 mm
Höjd:	1510 mm
Nettoskatt:	90 W
Ljudnivå:	39 dB
Årlig-energiförbrukning:	180 kWu
Energieffektivitetsklass (gammal):	A++
Frys bruttokapacitet:	26 l
Frys nettokapacitet:	26 l
Fryskapacitet:	2 kg/24u
Avfrostningsfunktion:	Ja
Dörröppningsriktning utbytbar:	Nee
Kylskåpets nettokapacitet:	222 l
Kylskåp med bruttokapacitet:	230 l
No Frost (kylskåp):	Nee
Kylskåp invändig belysning:	Ja
Multi-luftvägssystem (kylskåp):	Ja
Antal hyllor i kylskåp:	3
Antal-grönsakslådor:	1
Frysläge:	Boven
No Frost (frys):	Nee
Retentionstid vid strömavbrott:	12 uur
antal stjärnor:	4*
Total nettokapacitet:	248 l
Äggställ:	Ja
Flaskställ:	Ja
Inget frostsystem:	Nee
Automatisk avfrostning (kylskåp):	Ja
Total bruttokapacitet:	256 l
Antal kompressorer:	1
Klimaatklasse:	SN-T
Efter typ:	Enkel
Termostat:	Ja
Djup utan handtag:	682 mm
Djup när dörren är öppen:	730 mm
Vattendispenser:	Nee
Genomgående öppningsvinkel:	90 °
AC-ingångsspänning:	220 - 240 V
AC-ingångsfrekvens:	50 - 60 Hz
Iskubshållare:	Ja