Digitus DA-71035 Bruksanvisning
Läs gratis den bruksanvisning för Digitus DA-71035 (9 sidor) i kategorin Växla. Guiden har ansetts hjälpsam av 6 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 3.5 recensioner. Har du en fråga om Digitus DA-71035 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/9

USB 3.0
External HDD Enclosure 3.5" (8,89cm)
User Manual
DA-71035

Foreword
Congratulations on your purchase of our product! We will show you a new storage concept with safety
and convenience, It is our pleasure to give you the best solution to expand your HDD`s Capacity and
enhance your data`s reliability in PC system or Mac system. Before using the product, please read this
manual carefully for further recognizing of the product.
I. System Requirement
Hardware requirement: a PC or Notebook with free USB interface
Operation system: Windows 7/Vista/XP/2000
II. Feature
• Screwless design, easy install or remove disk drive
• Suitable for 3.5” (8,89cm) SATA HDD
• Compliant with USB 3.0 to SATA interface
• Transfer rate max up to 5Gb/s
• Backwards compatibility with USB 2.0, supports High-Speed (480Mbps)
• One touch backup function
• Support Hot-Plugging, and Plug & Play compatible
• Power Supply: AC100~240V input, DC 12V/2A output
III. Package content
Before using the product, please check the contents in the package as follows.
If it is not correct, please contact the local dealers timely.
• USB 3.0 External HDD Enclosure, 3.5 inches (8,89cm)
• Power adapter 12V/2A
• Product supported CD (Multi-language User Manual)
• User Manual
• USB 3.0 connection cable

IV. Hardware Install
1. Slide the button to position, [OPEN]
2. Slide the top cover to the direction of USB socket
3. Remove the top cover
4. Connect the 3.5" (8,89cm) SATA HDD to the 22pin SATA connector at the rear of the HDD firmly
5. Push the HDD into the enclosure slowly and carefully
6. Slide the top cover to the main case
7. Slide the button to the [CLOSE] position
8. Insert the enclosure to the attached stand
9. Connect the USB 2.0 connection cable to enclosure and PC
10. Connect the power adapter to the enclosure and power source
Produktspecifikationer
Varumärke: | Digitus |
Kategori: | Växla |
Modell: | DA-71035 |
Färg på produkten: | Zwart |
Vikt: | 320 g |
Bredd: | 280 mm |
Djup: | 139 mm |
Höjd: | 77 mm |
Förpackningens vikt: | 900 g |
Anslutningsteknik: | Bedraad |
Gränssnitt: | Ethernet |
Uppfyller branschstandarder: | ITU G.9954 (HomePNA 3.1) |
Nätverksstandard: | IEEE 802.3, IEEE 802.3u |
Förvaringstemperatur: | -10 - 70 °C |
Internera: | Nee |
Medeltid mellan fel (MTBF): | 57000 uur |
Värdgränssnitt: | RJ-45 |
Maximal dataöverföringshastighet: | 144 Mbit/s |
Drifttemperatur (TT): | 0 - 50 °C |
Relativ luftfuktighet i drift (VV): | 10 - 90 procent |
Behöver du hjälp?
Om du behöver hjälp med Digitus DA-71035 ställ en fråga nedan och andra användare kommer att svara dig
Växla Digitus Manualer
28 Februari 2025
28 December 2024
15 December 2024
26 September 2024
26 September 2024
26 September 2024
23 September 2024
23 September 2024
22 September 2024
22 September 2024
Växla Manualer
- Extech
- EVE
- Merlin Gerin
- INOGENI
- Buffalo
- Hamlet
- Brennenstuhl
- PreSonus
- ZyXEL
- Homematic IP
- Lancom
- Gefen
- Marmitek
- BZBGear
- Rex
Nyaste Växla Manualer
9 April 2025
9 April 2025
7 April 2025
5 April 2025
5 April 2025
5 April 2025
5 April 2025
3 April 2025
3 April 2025
2 April 2025