Digitus DN-14001-2 Bruksanvisning

Läs gratis den bruksanvisning för Digitus DN-14001-2 (6 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 4.5 recensioner. Har du en fråga om Digitus DN-14001-2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/6
Quick Installation Guide
DN- -214001
2
1. Introduction
Intelligent, fast and intelligent state tester for connection of telephone and
harness. Accurately determine which end of the RJ45 connector is
Connecting with the network line perfectly solves the problem that the
ordinary tester cannot determine two water. In the end, the RJ45
connector is not connected at that end, so as to save time.
2. Test
Pull the power switch up to ( ) position, QC
and the yellow power lamp of the host (QC)
is always on. The machine is in working
condition.
Insert one end of the RJ45 connector (or
RJ11 connector) into (QC) which needs to
be inspected check port.
The connector is connected with the wire
harness in good condition, and the wire
harness indicator lights are all on.
3
lf the connector is not connected properly
to the wire harness, the indicator light of -
the wire harness will not be turned on.
Function
For network 1.2.3.4.5.6.7.8.G line pairs, telephone line 1.2.3.4.5.6 line
pairs, root- -by root (pair) test, which (pair) staggered line, short circuit and
open circuit can be distinguished and determined.
Turn down the power switch to (TEST)
position, (TEST) power indicator green light
flashes.

Produktspecifikationer

Varumärke: Digitus
Kategori: Inte kategoriserad
Modell: DN-14001-2

Behöver du hjälp?

Om du behöver hjälp med Digitus DN-14001-2 ställ en fråga nedan och andra användare kommer att svara dig