Digitus DN-651107 Bruksanvisning
Läs gratis den bruksanvisning för Digitus DN-651107 (7 sidor) i kategorin Växla. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 1.5 recensioner. Har du en fråga om Digitus DN-651107 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/7
Industrial 5-Port Gigabit Switch
User Manual - DN-651107
Introduction
This hardened industrial 5 port Gigabit Ethernet Switch is equipped with
wide range VAC and VDC power input. It is suitable for heavy usage
environments such as hazardous environments or central control areas
where a reliable device is critical. It is an ideal solution for Industrial
Automation, IP surveillance, traffic monitoring and a wide range of
applications. It has been rigorously tested for your security, transportation
and telco applications.
Features
Hardened design Aluminum enclosure
103.5 x 32 x 81.5 mm (L x W x D)
Supports 18-36VAC/12-60VDC
Surge protection diodes on power input.
ESD protection diodes on RJ-45 port
Provides increased Noise Immunity
Extended environment specification -40°C to 75°C
Installation package
This unit can be din-rail mounted or wall-mounted. Din-rail brackets and
wall-mounted brackets are included.
Package Content:
1x Main unit
1x User Manual
2x Wall Mount Bracket
1x DIN Rail Bracket
1x 4 pin Terminal Block
4x Screws
Wall mount
bracket x 2 Philips Head Screw x 4
Din Rail Bracket x 1
4 pin Terminal Block x 1
Power connection
This unit provides a 4 pin terminal block. It can be operated using 12-
56VDC/18-36VAC power source. Always make sure your input voltage is
within this supported voltage range.
To connect power: This unit supports two power inputs. Follow the printed
polarity for +V1-, +V2- and ground. Connect positive wires to V+, connect
negative wires to V-, and connect a neutral wire to the ground screw.
+V1- is for power input one connection.
+V2- is for power input two connection.
Power connecting procedure:
STEP 1
–
Take out 4 pin terminal block located in the included
mounting kit package.
STEP 2
–
Connect power wires to +V1- or +V2- with
corresponding polarity. Connect the grounding wire
to the ground screw.
STEP 3
–
Plug into terminal block socket shown above.
Polarity needs to match V+ and V-.
WARNING:
Always SHUT OFF power source to connect power wire.
WARNING:
Any exceeded input voltage will not make this unit function and may
damage this unit.
+V1- +V2-
Produktspecifikationer
| Varumärke: | Digitus |
| Kategori: | Växla |
| Modell: | DN-651107 |
Behöver du hjälp?
Om du behöver hjälp med Digitus DN-651107 ställ en fråga nedan och andra användare kommer att svara dig
Växla Digitus Manualer
28 Februari 2025
28 December 2024
15 December 2024
26 September 2024
26 September 2024
26 September 2024
23 September 2024
23 September 2024
22 September 2024
22 September 2024
Växla Manualer
- Advantech
- Delta Dore
- Techly
- Intermatic
- RGBlink
- Perel
- Dahua Technology
- PCE
- IKEA
- Vemer
- GAO
- Berker
- IPGARD
- Homematic IP
- Victron Energy
Nyaste Växla Manualer
9 April 2025
9 April 2025
7 April 2025
5 April 2025
5 April 2025
5 April 2025
5 April 2025
3 April 2025
3 April 2025
2 April 2025