Digitus DS-55500 Bruksanvisning
Digitus
AV extender
DS-55500
Läs gratis den bruksanvisning för Digitus DS-55500 (6 sidor) i kategorin AV extender. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 2 recensioner. Har du en fråga om Digitus DS-55500 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/6
4K HDMI Extender, HDBaseT
Manual
DS-55500
Important safety notice
Please read below safety instructions carefully before installation and operation:
Please pay attention to all the warnings and hints on this device.
Do not expose this unit to rain, moisture and liquid.
Do not put any stuff into the device.
Do not repair or open this device without professional people's guidance.
Make sure good ventilation openings to avoid product overheating damage.
Shut off power and make sure environment is safe before installation.
Do not plug-in/out the connected cables when it is in using.
Make sure the specification matched if using 3rd party DC adapters.
1. Introduction
This HDBaseT single network cable extender transmits HDMI signal up to
70 meters over cat6 fluently and clearly. It is lossless in signal and supports 3D,
24 bits deep color, 4Kx2K, CEC and HDCP.
2. Features
Apply HDBaseT extend technology
Uncompressed HDMI video signal
Support full HD 1080p@60Hz, 3D, 4Kx2K
Extend 1080p signal over cat6a up to 70 meters
Support bi-directional IR pass back
Support HDCP, CEC, 24 deep color
Support uncompressed LPCM audio and compressed DTS-HD, Dolby True HD
can be powered by network cable. It only needs to input 12V power for either
transmitter or receiver for normal working
3. Package contents
HDMI to HDBaseT TX, sender x 1
HDBaseT to HDMI RX, receiver x 1
DC12V/2A x 1
IR blaster extension cable x 1
IR receiver extension cable x 1
User manual x 1
Mounting bracket x 1
4. Installation Requirements
HDMI source devices:
With HDMI OUTPUT interface, DVD, PS3, STB, PC etc.
Display devices:
With HDMI INPUT port, SDTV, HDTV, projector
Network cables:
UTP/STP Cat5e/Cat6/Cat6A/Cat7 network cables are following the standard of
IEEE-568B.
5. Panel description
5.1. HDMI to HDBaseT TX Sender
① HDMI IN: HDMI signal input to connect with HDMI source device.
② IR IN: IR signal input to connect with IR receiver extension cable.
③ IR OUT: IR signal output to connect with IR blaster extension cable.
④ DC12V: Power input
⑤ HDBT OUT: HDBaseT signal output
5.2. HDBaseT to HDMI RX Receiver
① DC12V: Power input
② HDBT IN: HDBaseT signal input
③ HDMI OUT: HDMI signal output to connect with HDMI display device.
④ IR IN: IR signal input to connect with IR receiver extension cable.
⑤ IR OUT: IR signal output to connect with IR blaster extension cable.
Produktspecifikationer
| Varumärke: | Digitus |
| Kategori: | AV extender |
| Modell: | DS-55500 |
Behöver du hjälp?
Om du behöver hjälp med Digitus DS-55500 ställ en fråga nedan och andra användare kommer att svara dig
AV extender Digitus Manualer
30 December 2025
27 December 2024
27 December 2024
22 December 2024
22 December 2024
22 December 2024
22 December 2024
22 December 2024
22 December 2024
22 December 2024
AV extender Manualer
- IMG Stage Line
- Peerless-AV
- ATen
- MuxLab
- Manhattan
- Abus
- Black Box
- Ag Neovo
- Lindy
- PureLink
- PureTools
- Sescom
- Accell
- Act
- Pyle
Nyaste AV extender Manualer
8 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
26 Februari 2025
25 Februari 2025
20 Februari 2025
20 Februari 2025