Dimplex GFP100BE Bruksanvisning

Dimplex element GFP100BE

Läs gratis den bruksanvisning för Dimplex GFP100BE (28 sidor) i kategorin element. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 2.5 recensioner. Har du en fråga om Dimplex GFP100BE eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/28
08/80259/0 ISSUE: 2 Series: A
Dimplex Girona (GFPE)
Models: GFP050E / GFP075E / GFP100E
GFP150E / GFP200E
These instructions should be read carefully
and retained for future use. Note also the
information presented on the appliance.
INSTRUCTION MANUAL
Installation and Operating
IMPORTANT
THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR
FUTURE REFERENCE. Note also the information presented on the appliance
CAUTION: FAILURE TO FOLLOW THESE INSTRUCTIONS MAY CAUSE INJURY AND/
OR DAMAGE AND MAY INVALIDATE YOUR GUARANTEE
IMPORTANT SAFETY ADVICE
When using electrical heaters, basic precautions should always be followed to reduce
the risk of fire, electrical shock, and injury to persons, including the following:
IMPORTANT: The wall bracket supplied with the heater must be used.
IMPORTANT: All packaging should be disposed of in an appropriate manner.
OVERHEATING WARNING
WARNING: In order to avoid overheating, do not cover or obstruct the heater. Do not
place material or garments on the heater, or obstruct the air circulation around the heater,
for instance by curtains or furniture, as this could cause overheating and a fire risk. NEVER
cover or obstruct in any way the heat outlet slots at the top of the heater or the air inlet
slots in the base of the heater.
WARNING:
THE SURFACES ON THIS HEATER CAN BE HOT. The heater carries a
warning ‘DO NOT COVER’ to alert the user to the risk of fire that exists if the heater is
accidentally covered. DO NOT place combustible items through the heater grille.
CAUTION: Some parts of this product can become very hot and cause burns. Particular
attention has to be given where children and vulnerable people are present.
For your safety this heater is fitted with a thermal cut-out. In the event that the
product overheats for some reason, the cut-out prevents excessive temperatures on
the product by cutting the power to the heater. Once the heater has cooled down,
it will reset automatically, it will continue to cycle on and o automatically until the
reason for overheating is removed. The display screen may flash red to indicate the
product has overheated. To reset the display, remove the obstruction and hold Enter
for 10 seconds.
2


Produktspecifikationer

Varumärke: Dimplex
Kategori: element
Modell: GFP100BE

Behöver du hjälp?

Om du behöver hjälp med Dimplex GFP100BE ställ en fråga nedan och andra användare kommer att svara dig