DJI OSMO Vehicle Mount Bruksanvisning
Läs gratis den bruksanvisning för DJI OSMO Vehicle Mount (4 sidor) i kategorin Stativ. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 5.5 recensioner. Har du en fråga om DJI OSMO Vehicle Mount eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
Vehicle Mount
OSMO
V1.0
Quick Start Guide
Disclaimer and Warning
Congratulations on purchasing your new DJI product. The information in this
document affects your safety and your legal rights and responsibilities. Read
this entire document carefully to ensure proper configuration before use.
Failure to read and follow instructions and warnings in this document may
result in serious injury to yourself or others, damage to your DJI product, or
damage to other objects in the vicinity. This document and all other collateral
documents are subject to change at the sole discretion of DJI. For up-to-date
product information, visit http://www.dji.com and click on the product page for
this product.
By using this product, you hereby signify that you have read this disclaimer
and warning carefully and that you understand and agree to abide by the
terms and conditions herein. You agree that you are solely responsible
for your own conduct while using this product, and for any consequences
thereof. You agree to use this product only for purposes that are proper and
in accordance with all applicable laws, rules, and regulations, and all terms,
precautions, practices, policies and guidelines DJI has made and may make
available.
DJI accepts no liability for damage, injury or any legal responsibility incurred
directly or indirectly from the use of this product. The user shall observe
safe and lawful practices including, but not limited to, those set forth in this
document.
Introduction
The Vehicle Mount for the Osmo uses a triple suction cup design to secure
the Osmo on any at surface of a vehicle.
Specications
Base Radius: 92 mm
Suction Cup Radius: 32 mm
Universal Joint Half: 51 mm
Max Height: 215 mm
Weight: 425 g 51 mm
215 mm
65 mm
92 mm
32 mm
Installation
1. Unfold the universal joint by loosening the knob. Screw it onto the base.
Then, slide the base lock to the locked position.
1
2
3
2. Place the Vehicle Mount on a at surface such as the roof of your car.
Ensure the suction cups make good contact with the surface and then
push down the suction cup levers.
Produktspecifikationer
| Varumärke: | DJI |
| Kategori: | Stativ |
| Modell: | OSMO Vehicle Mount |
Behöver du hjälp?
Om du behöver hjälp med DJI OSMO Vehicle Mount ställ en fråga nedan och andra användare kommer att svara dig
Stativ DJI Manualer
31 December 2025
11 December 2024
2 Oktober 2024
17 September 2024
1 September 2024
30 Augusti 2024
16 Augusti 2024
13 Augusti 2024
12 Augusti 2024
8 Augusti 2024
Stativ Manualer
- Alpine
- Flycam
- Acratech
- MOVE'N SEE
- Nikon
- Block & Block
- FLOWCINE
- IOptron
- Silvercrest
- Gravity
- Ravelli
- Mantona
- Oben
- Olloclip
- Kaiser Fototechnik
Nyaste Stativ Manualer
4 April 2025
4 April 2025
4 April 2025
4 April 2025
4 April 2025
4 April 2025
3 April 2025
2 April 2025
2 April 2025
2 April 2025