DJI Ronin RavenEye Bruksanvisning
DJI
Fjärrkontroll
Ronin RavenEye
Läs gratis den bruksanvisning för DJI Ronin RavenEye (8 sidor) i kategorin Fjärrkontroll. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 3.5 stjärnor baserat på 2.5 recensioner. Har du en fråga om DJI Ronin RavenEye eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/8
DJI RONIN
2020.10v1.0
User Guide
RavenEye Image Transmission System
3
In the Box
Introduction
DJI RONINTM RavenEye Image Transmission System is used to transmit a wireless video signal so that users can
access the camera view remotely. When used with DJI RS 2 or DJI RSC 2, users can also track subjects with
ActiveTrack 3.0 and use remote control features. RavenEye also supports Ronin-S and Ronin-SC and can be used
separately with the camera only.
Image Transmitter × 1
USB-C to USB-C Cable (20cm) × 1
Mini-HDMI to Micro-HDMI Cable
(20cm) × 1
Cold Shoe to 1/4” Screw Adapter
× 1
Mini-HDMI to HDMI Cable (20cm) × 1
M4 Screw (10mm) × 2
USB-C Cable (40cm) × 1
Mi n i - H DMI t o Mi n i - H DMI Cable
(20cm) × 1
Allen Wrench (3mm) × 1
1. Antennas
Transmit the wireless signal.
2. HDMI Port (Mini HDMI)
For connecting to the HDMI port of the camera.
3. RSS Camera Control Port (USB-C)
For connecting to the shutter control port of the
camera when not used with DJI RS 2 or DJI RSC 2. For
connecting to the shutter control port of the camera
when not used with DJI RS 2 or DJI RSC 2 (coming
soon).
4. Battery Level Indicators
Indicate the battery level.
5. Status LED
Indicates the system status.
1
2
7
3
4
5
6
8
9
4
Installation and Connection
There are three ways to use RavenEye.
Method 1: use RavenEye with DJI RS 2 or RSC 2 (DJI RS 2 is used as an example below)
1. Attach the image transmitter to the gimbal via the cold shoe. Adjust the antennas as shown and keep them
away from motor.
2. Connect the HDMITM port of the image transmitter to the HDMI port of the camera using the provided HDMI
cable according to the camera model.
3. Connect the power/communication port of the image transmitter to the image transmission port of the gimbal
using the provided USB-C to USB-C cable.
If the cold shoe of the gimbal is not available, you can attach the cold shoe to 1/4” screw adapter with
the image transmitter and use with a device that has a 1/4" screw hole.
HDMI
4. Connect the shutter control port of the camera to the RSS camera control port of the gimbal.
6. Power Button
Press and hold to power on or off. Press six times
to reset the default Wi-Fi password to 12345678
(the battery level indicators will blink three times
when the password is successfully reset. A new
password must be set in the Ronin app). Press
and hold for 10 seconds to force shutdown.
7. Cold Shoe
For connecting to the gimbal or camera.
8. Power/Communication Port (USB-C)
For charging and communicating with DJI RS 2
and RSC 2.
9. Reserved LED
Reserved LED currently without a function.
Produktspecifikationer
| Varumärke: | DJI |
| Kategori: | Fjärrkontroll |
| Modell: | Ronin RavenEye |
Behöver du hjälp?
Om du behöver hjälp med DJI Ronin RavenEye ställ en fråga nedan och andra användare kommer att svara dig
Fjärrkontroll DJI Manualer
1 September 2024
18 Augusti 2024
17 Augusti 2024
16 Augusti 2024
4 Augusti 2024
3 Augusti 2024
31 Juli 2024
30 Juli 2024
28 Juli 2024
Fjärrkontroll Manualer
- Arctic Cooling
- Antelope Audio
- Thomson
- Perel
- Clarion
- Fantini Cosmi
- Neewer
- Exxter
- ELV
- CSL
- EVE
- Lindy
- Spektrum
- Strong
- FireAngel
Nyaste Fjärrkontroll Manualer
9 April 2025
4 April 2025
3 April 2025
3 April 2025
2 April 2025
2 April 2025
1 April 2025
31 Mars 2025
31 Mars 2025
30 Mars 2025