Doepfer A-150 Bruksanvisning


Läs gratis den bruksanvisning för Doepfer A-150 (6 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 24 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 12.5 recensioner. Har du en fråga om Doepfer A-150 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/6
doepfer System A - 100 Dual VCS A-150
1
1. Introduction
Module A-150 (Dual VCS) contains two separate
voltage-controlled switches.
Each switch has a control voltage input, a common
Out / Input, and two In / Outputs. The switches are
bi-directional: they can work in both directions, so
can connect one input to either of two outputs, or
either of two inputs to one output. Voltages in the
range -8V...+8V at the O/I resp. I/O sockets can be
processed by the module.
Two LEDs show which in / output is active (ie. which
is connected to the common out / input).
From about March 2004 a new version of the A-150 is
available. This allows the full A-100 voltage range
-12V...+12V for the voltages at the O/I resp. I/O soc-
kets. The new version can be identified at the pc
board label "A-100 SYSTEM A-150 DUAL VC
SWITCH VERSION 2 " near the bus connector at the
pc board edge.
CV
O/I
A-150
CV
I/O 1
O/I
I/O 2
I/O 1
I/O 2
DUAL VCS


Produktspecifikationer

Varumärke: Doepfer
Kategori: Inte kategoriserad
Modell: A-150
Färg på produkten: Zwart
Antal batterier/batterier som stöds: 2
Batteri/Batteri laddningstid: 5 uur
Frekvens: 50/60 Hz
Laddningsström: 34 (± 10%)mA, 150 (± 10%)mA, 380 (± 10%)mA
Kemisk sammansättning: NiMH

Behöver du hjälp?

Om du behöver hjälp med Doepfer A-150 ställ en fråga nedan och andra användare kommer att svara dig