Dormakaba Oracode 660i Bruksanvisning
Dormakaba
Smarth hem
Oracode 660i
Läs gratis den bruksanvisning för Dormakaba Oracode 660i (5 sidor) i kategorin Smarth hem. Guiden har ansetts hjälpsam av 22 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 11.5 recensioner. Har du en fråga om Dormakaba Oracode 660i eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/5
1 PK3646
_
07_18
ORACODE 660i WIRELESS LOCK
ACTIVATION / PROGRAMMING
For 660i Wireless Locks with Standard Gateway
ORACODE SMART CONTROLLER INSTALLATION
WIRELESS LOCK ACTIVATION (PUT ON-LINE)
1. SMART CONTROLLER POSITIONING
• Avoid placing the Smart Controller in close proximity
(< 5 feet / 2 m) to a WiFi device.
• Position the Smart Controller within 33 ft / 10 meters of
the lock.
• Avoid heavy obstruction between the Smart Controller and lock
(e.g., metallic or concrete wall or floor).
• Avoid placing the Smart Controller close to metallic objects (e.g.,
metallic table, refrigerator, filing cabinets, etc.).
2. SMART CONTROLLER CONNECTION
• Connect the Smart Controller to the Internet modem/router
using the Ethernet Cable.
• Boot up the Smart Controller by connecting the Power Adapter.
• The Smart Controller will perform any necessary updates during
the boot-up process, and the green LEDs on the top of the
Smart Controller will come on (no specific order). The boot-up
process can take from 30 seconds to a few minutes.
• Wait until all green LEDs are on. This confirms the Smart
Controller has successfully performed all necessary updates and
is ready to connect to the Oracode Server
NOTE: The ZigBee LED may not illuminate during the initial
installation. This is normal in most situations. Proceed with
Wireless Lock Activation
1. ACTIVATION CODE GENERATION
• Log on to your Oracode Live account (www.kabaecodewireless.com).
• Go to “Door Monitoring & Management” then to “Door Monitoring”.
• Within the “Door Monitoring” module, select the door to be activated from the door list, and click the ”Activate as
Wireless” button.
• Select the Time Zone where the controller and lock will be located. The Network Name will be populated
automatically, using the Door name as its basis. This can be edited if need be. Click “Save Changes”.
• When you click the “Save Changes” button, the Activation number will be provided.
• Use this number to complete the Activation Process in the following steps 2.2 (for Oracode Live) or 2.3 (for
BeHome247).
For 660i Wireless Lock with Smart Controller
Smart Controller (Back)
USB Ethernet Power
Smart Controller (Top)
Power
Adaptor
Ethernet
Cable
1
2
Produktspecifikationer
| Varumärke: | Dormakaba |
| Kategori: | Smarth hem |
| Modell: | Oracode 660i |
Behöver du hjälp?
Om du behöver hjälp med Dormakaba Oracode 660i ställ en fråga nedan och andra användare kommer att svara dig
Smarth hem Dormakaba Manualer
8 September 2024
Smarth hem Manualer
- EQ3
- Gardena
- Profile
- Elro
- Niceboy
- Digi
- Trust
- ATen
- ETiger
- Nanoleaf
- Imou
- Renkforce
- KKT Kolbe
- Trevi
- Devolo
Nyaste Smarth hem Manualer
29 Mars 2025
29 Mars 2025
29 Mars 2025
27 Mars 2025
18 Mars 2025
18 Mars 2025
12 Mars 2025
26 Februari 2025
19 Februari 2025
18 Februari 2025