Draper 55657 Bruksanvisning
Draper
Slipmaskin
55657
Läs nedan 📖 manual på svenska för Draper 55657 (10 sidor) i kategorin Slipmaskin. Denna guide var användbar för 4 personer och betygsatt med 3.5 stjärnor i genomsnitt av 2.5 användare
Sida 1/10
MULTI-TOOL BATTERY SYSTEM
20V
DELTASCHLEIFER
55657 & 00608
LIJADORA TRI-BASE
20V
55657 & 00608
PONCEUSE
TRIANGULAIRE
20V
55657 & 00608
20V
LEVIGATRICE
A TRE BASI
55657 & 00608
20V
SCHUURMACHINE OP
DRIE SCHUURVLAKKEN
55657 & 00608
LIXADEIRA DE BASE
TRIPLA
20V
55657 & 00608
ORIGINAL LANGUAGE
20V
TRI-BASE
SANDER
55657 & 00608
1. INTRODUCTION
1.1 SCOPE
This tri-base sander is intended for domestic and
infrequent light trade use only.
As part of our core range, this product is suitable for
enthusiasts and tradespeople alike. Any application
other than that it was intended for, is considered misuse.
This product is not a toy and must not be used by
children or any person with reduced physical, sensory or
mental capabilities or lack of experience and knowledge,
or people unfamiliar with these instructions.
Local regulations may restrict the age of the operator.
1.2 UNDERSTANDING THIS MANUALS
SAFETY CONTENT:
Warning! – Information that draws attention to the
risk of injury or death.
Caution! – Information that draws attention to the risk of
damage to the product or surroundings.
1.3 EXPLANATION OF SYMBOLS
Read the instruction manual.
Wear face mask and safety glasses.
Wear ear defenders.
Wear protective gloves.
Long hair must be tied back.
Do not abandon into the environment.
Keep out of the reach of children.
Warning!
Warning! Risk of crushing.
Direction of rotation.
dB
77
Continuous A-Weighted Sound
Pressure Level.
Class II construction
(Double insulated).
WEEE –
Waste Electrical & Electronic Equipment.
Do not dispose of Waste Electrical & Electronic
Equipment in with domestic rubbish.
Lithium-ion product.
Do not incinerate or throw
onto fire.
For indoor use only.
Do not expose to rain.
Fuse protective device.
Polarity indication.
Rated voltage.
European conformity.
2. SPECIFICATION
2.1 SPECIFICATION
Stock No’s. ............................................. 55657 & 00608
Part No’s. ..................... D20TBS135 & D20TBS135SET
Pad size .................................................. 95x135x135mm
Revolutions per minute (no load) ................. 11,000min-1
Sound pressure level (LpA)*: .......... 77dB(A), K=3 db(A)
Sound power level (LWA)**: ............ 88dB(A), K=3 db(A)
Uncertainty (K): ....................................................3dB(A)
Vibration level†: .................................6.7m/s², K=1.5m/s2
Weight (machine only) ............................................ 0.8kg
Battery pack (for 55657, sold separately):
Part No. .............................................. D20B2.0AH
Type ............................................................ Li-Ion
Rated Voltage .................................................20V
Rating ......................................................... 2.0Ah
Chargers (for 55657, sold separately):
–
2
–
–
3
–
Part No. ................................................... D20BCS
Rated Voltage ............................................ 230V~
Rated Frequency ...........................................50Hz
Rated D.C. output voltage .............................. 20V
Rated D.C. output current ............................1.65A
Protective device rated current ..........................8A
Construction ............................................ Class II
3. HEALTH AND SAFETY
INFORMATION
3.1 GENERAL SAFETY
INSTRUCTIONS FOR POWER TOOL
USE
Warning! Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tools” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk
of electric shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or
medication. A moment of inattention while
operating power tools may result in serious
personal injury.
b) Use personal protective equipment Always
wear eye protection. Protective equipment such
as a dust mask, non-skid safety shoes, hard hat
or hearing protection use for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools
with your finger on the switch or energising power
tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool
may result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away
from moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
g) If devices are provided for the connection of
dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce
dust-related hazards.
h) Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action
can cause severe injury within a fraction of a
second.
4) Power tool use and care
a) Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
b) Do not use the power tool if the switch does
not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous
and must be repaired.
c) Disconnect the plug from the power source
and/or remove the battery pack, if detachable,
Produktspecifikationer
| Varumärke: | Draper |
| Kategori: | Slipmaskin |
| Modell: | 55657 |
Behöver du hjälp?
Om du behöver hjälp med Draper 55657 ställ en fråga nedan och andra användare kommer att svara dig
Slipmaskin Draper Manualer
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
1 Juni 2025
Slipmaskin Manualer
- Slipmaskin Solo
- Slipmaskin Scheppach
- Slipmaskin Westfalia
- Slipmaskin Chicago Pneumatic
- Slipmaskin Maestro
- Slipmaskin Kraftronic
- Slipmaskin Craftsman
- Slipmaskin Trotec
- Slipmaskin Silverline
- Slipmaskin Hilti
- Slipmaskin Festool
- Slipmaskin Rikon
- Slipmaskin Alpha Tools
- Slipmaskin Ryobi
- Slipmaskin Ferm
Nyaste Slipmaskin Manualer
4 Juni 2025
31 Maj 2025
31 Maj 2025
3 April 2025
30 Mars 2025
29 Mars 2025
29 Mars 2025
29 Mars 2025
28 Mars 2025
28 Mars 2025