Draper 70011 Bruksanvisning
Läs gratis den bruksanvisning för Draper 70011 (13 sidor) i kategorin svetsare. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 1.5 recensioner. Har du en fråga om Draper 70011 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/13
200A MMA INVERTER
WELDER TIG LIFT
70011
These instructions accompanying the product are the original instructions. This document is part of the product,
keep it for the life of the product passing it on to any subsequent holder of the product. Read all these instructions
before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed,
and contains all the necessary information to ensure its correct and safe use. By following all the general safety
instructions contained in this manual, it will ensure both product and operator safety, together with longer life of the
product itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper
Tools policy of continuous improvement determines the right to make modications without prior warning.
1. INTRODUCTION
1.1 SCOPE
This high-tech digital controlled arc welding machine
adopts cutting edge inverter technology, controlled by a
microchip programmed system. Portable design, easy
operation, with a strong and stable performance welder
enables application for a variety of ferrous metals such
as low carbon steel, medium carbon steel, and alloy
steel, etc.
This product is suitable for enthusiasts and
tradespersons alike. Any application other than that it
was intended for, is considered misuse.
This product is not a toy and must not be used by
children or any person with reduced physical, sensory or
mental capabilities or lack of experience and knowledge,
or people unfamiliar with these instructions.
Local regulations may restrict the age of the operator.
1.2 UNDERSTANDING THIS MANUALS
SAFETY CONTENT:
Warning! – Information that draws attention to the
risk of injury or death.
Caution! – Information that draws attention to the risk of
damage to the product or surroundings.
1.3 EXPLANATION OF SYMBOLS
Warning!
Read the instruction manual.
Warning!
Wear suitable welding eye/face protection.
Warning!
Wear ear defenders (During grinding
operations).
Warning!
Wear protective gloves.
Keep out of the reach of children.
Warning!
Danger of electric shock.
Danger of re.
Danger of explosion.
Danger of fumes.
Danger of ultraviolet radiation.
Danger of burning splashes.
Pressure bottle to be secured by chain.
Fan cooled.
Input current.
Input voltage.
Protection rating.
Thermal overload.
MMA range.
Electrode sizes.
ARC welding (stick), MMA ( Manual Metal
Arc) or
SMAW (Shielded Metal Arc Welding).
TIG welding (Tungsten Inert Gas) or
GTAW (Gas Tungsten Arc Welding).
Machine weight.
–
2
–
Produktspecifikationer
| Varumärke: | Draper |
| Kategori: | svetsare |
| Modell: | 70011 |
Behöver du hjälp?
Om du behöver hjälp med Draper 70011 ställ en fråga nedan och andra användare kommer att svara dig
svetsare Draper Manualer
25 September 2025
25 September 2025
svetsare Manualer
- Daewoo
- Gude
- Stanley
- Einhell
- Weller
- Scheppach
- Cigweld
- RIDGID
- Holzmann
- Dedra
- Rothenberger
- Full Boar
- Stamos
- MKC
Nyaste svetsare Manualer
9 September 2025
31 Augusti 2025
31 Augusti 2025
19 Augusti 2025
19 Augusti 2025
19 Augusti 2025
18 Augusti 2025
10 Augusti 2025
10 Augusti 2025
7 Augusti 2025