DS18 JK-SQBASSHARNESS Bruksanvisning

DS18 ej kategoriserat JK-SQBASSHARNESS

Läs gratis den bruksanvisning för DS18 JK-SQBASSHARNESS (8 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 3.6 stjärnor baserat på 1.5 recensioner. Har du en fråga om DS18 JK-SQBASSHARNESS eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/8
JK-SQBASSHARNESS
USER MANUAL
A. Pin Remover
B. #2 Philips Screwdriver
C. ¼ Drill Bit
D. 7mm Socket
E .10mm Socket
F. 18mm Socket
G. T27 Socket
I. Impact wrench
Equipment you will need
(Not included in the kit)
•SQBASS (Active subwoofer)
SQBASS Brackets Wiring Harness
X-4, M5x16mm
screws, and nuts
X-4, 2x8mm screws
JK-SQBASSHARNESS
for JEEP: SERIES
Item included:
Tools required:
A
A
B
B
1
ATTENTION
Installation of mobile audio and video components requires experience with a variety of
mechanical and electrical procedures. Although this manual provides general installation and
operation instructions, it does not show the exact installation methods for your vehicle. If you
do not have the required knowledge and experience to successfully complete the installation,
consult an authorized dealer about professional installation service.
ATTENTION
Disconnect the negative post (Ground) of the battery before you start the installation. This
helps avoid airbags coding and malfunctions, codes module malfunction or any electrical
issues
Under Seat SQBass Rack/Bracket
installation
1
2
Remove the belt screw from the seat using a T40 socket, then you can remove the seat from
the Jeep and put it on this position for easy access under the seat.
Starts with removing the bolts of the Driver seat using the 18mm socket with an impact
wrench tool.
2


Produktspecifikationer

Varumärke: DS18
Kategori: ej kategoriserat
Modell: JK-SQBASSHARNESS

Behöver du hjälp?

Om du behöver hjälp med DS18 JK-SQBASSHARNESS ställ en fråga nedan och andra användare kommer att svara dig