Durkopp Adler 532 Bruksanvisning

Durkopp Adler Symaskin 532

Läs gratis den bruksanvisning för Durkopp Adler 532 (100 sidor) i kategorin Symaskin. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 2 recensioner. Har du en fråga om Durkopp Adler 532 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/100

Operating Instructions

512/532

Property of Dürkopp Adler GmbH and protected by copyright.

Any reuse of these contents, including extracts, is prohibited without the

prior written approval of Dürkopp Adler GmbH.

IMPORTANT

READ CAREFULLY BEFORE USE

KEEP FOR FUTURE REFERENCE

Table of Contents

Operating Instructions 512/532 - 06.0 - 12/2020 1

1 About these instructions .................................................................... 5

1.1 For whom are these instructions intended? .......................................... 5

1.2 Representation conventions – symbols and characters ........................ 6

1.3 Other documents................................................................................... 7

1.4 Liability ..................................................................................................8

2 Safety....................................................................................................9

2.1 Basic safety instructions........................................................................9

2.2 Signal words and symbols used in warnings.......................................10

3 Operation ........................................................................................... 15

3.1 Threading needle thread .....................................................................15

3.2 Setting the needle thread tension........................................................ 16

3.3 Setting the thread regulator.................................................................17

3.4 Winding the hook thread ..................................................................... 18

3.5 Replacing the bobbin........................................................................... 20

3.6 Setting the hook thread tension........................................................... 22

3.7 Changing the needle ........................................................................... 23

3.8 Adjusting the button mount of the button clamp (Class 532)............... 25

3.9 Shank shaper (optional) ...................................................................... 27

3.10 Sewing................................................................................................. 28

4 Programming ..................................................................................... 29

4.1 Control panel ....................................................................................... 29

4.2 Switching on the machine ................................................................... 30

4.3 Referencing the machine .................................................................... 31

4.4 Selecting the seam appearance..........................................................31

4.5 Scaling the axes .................................................................................. 31

4.5.1 Scaling the X axis (software version up to M2.10) .............................. 31

4.5.2 Scaling the X axis (from software version M2.14) ............................... 32

4.5.3 Scaling the Y axis (software version up to M2.10) .............................. 32

4.5.4 Scaling the Y axis (from software version M2.14) ............................... 32

4.5.5 Recalculate the button hole clearance (class 532)

(software version up to M2.08)............................................................ 32

4.5.6 Recalculate the button hole clearance (class 532)

(from software version M2.10)............................................................. 33

4.5.7 Recalculate the bartack dimensions (class 512)

(software version up to M2.10)............................................................ 33

4.5.8 Recalculate the bartack dimensions (class 512)

(from software version M2.14)............................................................. 34

4.6 Setting the speed ................................................................................ 34

4.7 Checking the seam appearance.......................................................... 34

4.8 Changing the seam appearance ......................................................... 35

4.9 Bobbin winding....................................................................................35

Produktspecifikationer

Varumärke:	Durkopp Adler
Kategori:	Symaskin
Modell:	532
Färg på produkten:	Beige
Vikt:	4000 g
Bredd:	450 mm
Höjd:	480 mm
Förpackningens vikt:	4900 g
Förpackningsmått (BxDxH):	510 x 230 x 510 mm
Material:	Aluminium
Antennförstärkningsnivå (max):	32.2 dBi
Frekvensomfång:	10.7 - 12.75 GHz