Dynaudio Esotec 342 Bruksanvisning

Dynaudio högtalare Esotec 342

Läs nedan 📖 manual på svenska för Dynaudio Esotec 342 (23 sidor) i kategorin högtalare. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/23
Esotar / Esotec
16mm
4,5mm
27mm
Mounting hole ø86mm
6holes ø4,3mm on ø101mm
ø111
1.2μF
8.2Ω
Soft Dome Tweeter Esotar² 110
Dynaudio has relied on soft dome tweeters for reproducing natural
high frequencies since the company’s origins, having perfected
the soft dome principle. The Esotar tweeter design requires an
extremely time-consuming labor intensive process where the ne
fabric diaphragm is shaped into a dome and then treated with a
special precision coating.
The best material for a tweeter is experience: Dynaudio has earned a
reputation as a manufacturer of the nest high frequency drivers available
with its venerable Esotar tweeters, and the company has incorporated its
most rened technologies into the new Esotar² 110 reference automotive
tweeter – which purely lives up to the Esotar designation by offering the
most accurate, nuanced and detailed high frequency performance in the
world. The Esotar² 110 represents the state-of-the-art in tweeter design
while never exhibiting a shrill or harsh sonic character typical of metal or
exotic material tweeter designs.
The Esotar² 110 tweeter features a specially coated 28 mm (1.1") diameter
fabric dome, an ultra-lightweight voice coil, an extremely powerful neo-
dymium magnet, and an exceptional CNC-machined metal housing with a
newly-developed damping back chamber. The performance is highlighted
by extremely high power handling, effortless reproduction of dynamics,
absolute clarity, natural tonal balance and incredible resolution.
Thiele Small Parameters
Nominal impedance 6 ΩZnom
DC resistance 5.2 ΩRe
Voice coil inductance - mHLe
Resonance frequency fs 1000 Hz
Mechanical Q factor Qms -
Electrical Q factor Qes -
Total Q factor Qts -
Mechanical resistance Rms - kg/s
Moving mass (incl. air load) Mms - g
Suspension compliance Cms - mm/N
Effective dome diameter 3.1 mmd
Effective piston area Sd 7.7 cm²
Equivalent volume Vas - l
Force factor BL - Tm
Recommended frequency range 2000–30000 Hz
Magnet and Voice Coil Properties
Voice coil diameter dc 28 mm
Voice coil height 2.8 mmhc
Linear excursion, peak to peak - mm
Max. excursion, peak to peak - mm
Power Handling
Nominal long term IEC 150 W
Transient (10 ms) 1000 W
Mechanical Properties
Net weight 0.5 kg
Overall dimension ø 111 x 41 mm
Impedance compensation circuit
4 mm
6 holes ø4mm 101 mm on ø101mm
ø110 mm
12 mm
42 mm
90 mm
5.6μF
6.8Ω
Midrange Esotar² 430
The new Esotar² 430 midrange features a geometrically optimized
3.5" diameter MSP (magnesium silicate polymer) cone, a material
providing the ideal combination of stiffness, low weight and excel-
lent inner damping.
The diaphragm and dust cap are molded as one piece. A new magnet/
motor system incorporates powerful neodymium magnets and a large
vented pole piece. The relatively large diameter aluminum voice coil wire
provides for a low moving mass, and is wound on an aluminum former to
maintain the extremely light weight.
Built into a rigid, die-cast solid aluminum frame with aerodynamically
shaped ribs, in conjunction with the powerful motor, the characteristic
Esotar² low-mass driver construction provides excellent transient re-
sponse, speed and precision, with smooth high frequency roll off and a
natural midrange reproduction. The Esotar² 430 driver exhibits very low
distortion even at extreme volumes, while the transparency and detail of
its midrange quality can best be described as holographic.
The Dynaudio Esotar² automotive loudspeaker series represent the high-
est level of automotive music reproduction not just for Dynaudio but
for the entire arena of mobile audio. The compact Dynaudio Esotar² 430
expands the possibilities for system installations with a performance that
was previously not possible, and is a perfect complement to the perfor-
mance benchmarks set by the Esotar² loudspeaker separates.
Thiele Small Parameters
Nominal impedance 4 ΩZnom
DC resistance 4 ΩRe
Voice coil inductance 0.19 mHLe
Resonance frequency fs 64 Hz
Mechanical Q factor Qms 1.5
Electrical Q factor Qes 0.21
Total Q factor Qts 0.18
Mechanical resistance Rms 1.3 kg/s
Moving mass (incl. air load) Mms 4.9 g
Suspension compliance Cms 1.2 mm/N
Effective dome diameter d 75 mm
Effective piston area Sd 45 cm²
Equivalent volume Vas 3.5 l
Force factor BL 6.2 Tm
Recommended frequency range 200–7000 Hz
Magnet and Voice Coil Properties
Voice coil diameter dc 34 mm
Voice coil height 9.5 mmhc
Linear excursion, peak to peak 4.9 mm
Max. excursion, peak to peak 21 mm
Power Handling
Nominal long term IEC 150 W
Transient (10 ms) 1000 W
Mechanical Properties
Net weight 0.47 kg
Overall dimension ø 110 x 49 mm
Impedance compensation circuit
ø169mm
6holes ø4,3mm on ø158
Mounting hole min ø136mm
67mm
5,2mm
15mm @max cone excursion
22μF
4.7Ω
Woofer Esotar² 650
The Esotar² 650 is a 17 cm (6.5") diameter mid/bass driver that is built
on a rigid, die-cast solid aluminum frame and features Dynaudio’s
characteristic MSP (Magnesium Silicate Polymer) diaphragm.
The MSP cone is a proprietary Dynaudio innovation, made in-house and
featuring precisely-shaped, geometrically-optimized form to enable the
smooth, optimized sound dispersion.
The voice coil diameter is exceptionally large at 75 mm, but by using
extremely light aluminum wire wound on a Kapton former, the coil re-
mains extremely lightweight to enable ultra-fast movement. The large
coil enables the magnet to be positioned inside the coil, allowing for a
larger and more homogenous magnetic eld to be utilized. In conjunc-
tion with the incredibly powerful, high-efciency neodymium magnet,
this low-mass driver construction provides excellent transient response,
incredible speed and unmatched precision.
When used as part of a two-way speaker system, the midrange resolution
of the Esotar² 650 is simply beyond reproach; mid-bass remains taught
and accurate while always exhibiting perfect control at all volume levels.
The Esotar² 650 perfectly reects the innovation and performance that
have established the Dynaudio Esotar drivers as the most advanced
high-performance transducers available.
Thiele Small Parameters
Nominal impedance 4 ΩZnom
DC resistance 3.4 ΩRe
Voice coil inductance 0.33 mHLe
Resonance frequency fs 49.6 Hz
Mechanical Q factor Qms 6.2
Electrical Q factor Qes 0.47
Total Q factor Qts 0.44
Mechanical resistance Rms 1 kg/s
Moving mass (incl. air load) Mms 20 g
Suspension compliance Cms 0.52 mm/N
Effective dome diameter 123 mmd
Effective piston area Sd 120 cm²
Equivalent volume Vas 10.5 l
Force factor BL 6.73 Tm
Recommended frequency range 50–4000 Hz
Magnet and Voice Coil Properties
Voice coil diameter dc 75 mm
Voice coil height 14 mmhc
Linear excursion, peak to peak 9 mm
Max. excursion, peak to peak 21 mm
Power Handling
Nominal long term IEC 200 W
Transient (10 ms) 1000 W
Mechanical Properties
Net weight 1.25 kg
Overall dimension ø 169 x 78 mm
Impedance compensation circuit

Produktspecifikationer

Varumärke: Dynaudio
Kategori: högtalare
Modell: Esotec 342

Behöver du hjälp?

Om du behöver hjälp med Dynaudio Esotec 342 ställ en fråga nedan och andra användare kommer att svara dig




högtalare Dynaudio Manualer

högtalare Manualer

Nyaste högtalare Manualer