Dynaudio Studio S4-LCR65W Bruksanvisning

Dynaudio högtalare Studio S4-LCR65W

Läs gratis den bruksanvisning för Dynaudio Studio S4-LCR65W (9 sidor) i kategorin högtalare. Guiden har ansetts hjälpsam av 28 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 14.5 recensioner. Har du en fråga om Dynaudio Studio S4-LCR65W eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/9

S4-LCRMT S4-LCR65W

Installation Manual

Studio Series

Welcome to the custom install Studio Series and thank you for choosing a

Dynaudio Custom Install product.

The S4-LCRMT and S4-LCR65W are modular in-wall speakers designed for left,

centre and right channel applications in multi-channel audio systems.

The S4-LCR Series offers very high quality audio performance while at the same

time providing multiple conguration options and incorporating numerous features

designed to ease installation.

Dynaudio custom install limited warranty

Dynaudio warrants its custom install products to be free from defects in

materials and workmanship under conditions of normal use and service

for a lifetime period from the date of original purchase. For this warranty

to apply, the unit must be installed and used according to its written

instructions.

The obligation under this warranty shall be limited to the replacement, repair or

refund of any such defective device within the warranty period, provided that:

1. inspection by Dynaudio indicates the validity of the claim;

2. the defect is not the result of damage, misuse, lightning, power

surges, negligence, improper operation (installation) or failure to follow

instructions contained in the manual or written instructions provided by

Dynaudio after the original purchase;

3. the product has not been altered in any way or repaired by others and

that factory sealed units are unopened (a service charge plus parts and

labour will be applied to units defaced or physically damaged);

4. the dealer from whom the Dynaudio products were purchased was

authorized to sell such products at the time of the original purchase;

5. the service provider for, including but not limited, installation or repair of

the product, was authorized in writing by Dynaudio;

6. the original, dated Bill of Sale is presented whenever service is required

during the warranty period;

7. freight charges for the return of products to Dynaudio are prepaid;

8. all units ‘out of warranty’ are subject to a service charge. The service

charge will cover minor repairs (major repairs will be subject to

additional charges for parts and labour).

This warranty is in lieu of and excludes all other warranties, expressed or

implied. Neither this warranty nor any other warranty, express or implied,

including implied warranties of merchantability and tness, shall extend

beyond the warranty period.

Dynaudio shall not be liable for damages to any other equipment or

other items at the site of use, or any other damages whether incidental,

consequential or otherwise. Dynaudio shall not be liable for any anticipated

prots, any incidental or consequential damages, loss of time or other

losses incurred by the purchaser in connection with the purchase, operation

or use of the product.

The information this document contains is subject to change without

notice. In the event that there are differences between this warranty and

the provisions of any advertisements, documentation, product brochures or

packaging cartons, the terms of this warranty shall prevail.

Environmental note

This product complies with international directives, including but not

limited to the Restriction of Hazardous Substances (RoHS) in electrical

and electronic equipment, the Registration, Evaluation, Authorisation and

restriction of Chemicals (REACH) and the disposal of Waste Electrical and

Electronic Equipment (WEEE). Consult your local waste disposal authority

for guidance on how properly to recycle or dispose of this product.

Disposal

Disposal of used electrical and electronic equipment (applicable in

European countries with separate collection systems for this equipment).

This symbol on the product or its packaging indicates that the product

may not be treated as household waste. Instead it must be handed

over to the applicable collection point for the recycling of electrical

and electronic equipment. By ensuring this product is disposed of

correctly, you will help prevent potential negative consequences for

the environment and human health. The recycling of materials helps to

conserve natural resources. For more detailed information on recycling

this product, please contact your local authority, community waste

disposal of, or the shop where you purchased the product.

Important safety instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus that produce heat.

9. Only use attachments / accessories specied by the manufacturer.

10. Refer all servicing to qualied service personnel.

1. Introduction

This manual describes the installation of S4-LCR Series modules

within drywall/plasterboard walls. It begins by listing the carton

contents and continues information specic to installing in-wall

speakers.

If this is your rst time working with Dynaudio Studio Series

custom install speakers, or if you have not done so for a while, we

recommend that you read the appropriate sections of this manual

before you begin.

Note: Visit dynaudio.com for the latest Studio Series news and

information.

The S4-LCR Series is designed to provide very high quality left,

centre, and right channel audio in custom installations where

speakers are required to be tted ush in walls. The S4-LCR Series

not only benets from four decades of Dynaudio speaker expertise

but has been designed through its modular format to offer enhanced

versatility in terms of both practical installation and acoustic

performance.

S4-LCR Series modules comprise a Speaker Unit and Installation

Frame. The Installation Frame is inserted into the wall cut-out and

securely xed in place using auto-locking clamps. The Speaker Unit

is then connected to the speaker cables before being inserted into

the Installation Frame to be held in place by a latch system. The grille

is then tted, secured by magnets integrated within the Installation

Frame.

• S4-LCR Series modules are uniquely simple to install. Once a

wall cut-out is created, no tools are required and installation can

be completed by one person without assistance. Every element

of the S4-LCR Series installation procedure, from unpacking the

speakers to painting and tting the magnetic grilles is simplied

and streamlined by design.

• S4-LCR Series speakers employ numerous Dynaudio

technologies, borrowed from the company’s studio monitors and

high-end hi- speakers, to bring genuinely high performance

audio to custom installations: unique bass/mid drivers with large

diameter aluminium voice coils and nite element optimised, low-

distortion magnet systems, proprietary MSP (Magnesium Silicate

Polymer) diaphragms, and precision coated soft dome tweeters

with powerful neodymium magnets are just a few examples

among many.

• The S4-LCR Series comprises two modules:

the S4-LCRMT mid/tweeter module and the S4-LCR65W twin

driver bass module. A single S4-LCRMT module can be used

with one or, for higher volume level applications, two S4-LCR65W

modules.

• S4-LCRMT sensitivity can be adjusted via a rear mounted switch

to match either one or two S4-LCR65W modules. The electrical

crossover between S4-LCRMT and S4-LCR65W modules can

be accomplished passively, using either the standard internal

passive lters, or actively using external active lter components.

Switches and bypass jumpers located on the rear of the speaker

units engage or bypass the internal passive bass module low

pass and mid/tweeter high pass lters.

1.1 Carton Contents

The carton contents for all S4-LCR Series modules are essentially the

same. Items only differ in terms of format and dimension. Within each

carton can be found:

1 x Speaker Module

1 x Installation Frame

2 x Frame Flange

1 x Cut-out Template

1 x Paint Mask

1 x Document pack

A typical carton contents is illustrated in Diagram 1.

Diagram 1

Speaker Unit Frame Flange (pair)

Cut-out Template

Installation Frame

Paint Mask

Document Pack

190mm (7.5”)

x 195mm (7.7”)

S4-LCRMT

• Each S4-LCR Series module is supplied with a pair of Installation

Frame Flanges. With frame anges tted, modules can be

installed individually and spaced apart. With one or both frame

anges removed, multiple modules can be consolidated and

installed in a common wall cut-out.

• S4-LCRMT modules are intended to be installed only in portrait

orientation, however S4-LCRMT speaker units can be rotated

within their installation frames in order that the frames match the

orientation of adjacent S4-LCR65W modules.

• S4-LCR65W modules can be installed in either landscape or

portrait format. In either case, multiple modules can be either

consolidated for installation in a common wall cut-out, or installed

in individual wall cut-outs.

Grilles are not supplied with S4-LCR Series modules but can be

supplied as accessories in a range of lengths to suit installation

congurations. S4-LCR grilles attach magnetically and fully paintable.

Produktspecifikationer

Varumärke:	Dynaudio
Kategori:	högtalare
Modell:	Studio S4-LCR65W
Färg på produkten:	Metallic, Red
Vikt:	53 g
Bredd:	18 mm
Djup:	92 mm
Höjd:	120 mm
Förpackningens vikt:	143 g
Förpackningens bredd:	174 mm
Djuppackning:	143 mm
Förpackningshöjd:	33 mm
Användarmanual:	Ja
Hållbarhetscertifikat:	CE, RoHS
Förvaringstemperatur:	-25 - 70 °C
Internera:	Ja
Antal portar USB 3.2 Gen 1 (3.1 Gen 1) Typ A:	2
Medeltid mellan fel (MTBF):	1920042 uur
Värdgränssnitt:	PCIe
Medföljande drivrutiner:	Ja
Maximalt avstånd:	3 m
Serveroperativsystem som stöds:	Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Monteringsfästen ingår:	Ja
Chipset:	Renesas / NEC - µPD720201
(Ytter) huvudpaketets höjd:	316 mm
(Ytter) huvudförpackningens bredd:	383 mm
(Ytre) huvudpaketets längd:	495 mm
Kvantitet per (yttre) huvudkartong:	60 stuk(s)
Drifttemperatur (TT):	5 - 50 °C
Relativ luftfuktighet i drift (VV):	20 - 80 procent
Harmoniserad systemkod (HS):	84733020
Expansionskorts formfaktor:	Volledige hoogte / Laag profiel
Expansionskort standard:	PCI 2.0
Dataöverföringshastighet (max):	5 Gbit/s
Antal interna SATA-portar:	1
Utgångsgränssnitt:	SATA, USB 3.2 Gen 1 (3.1 Gen 1)
Maximal kabellängd:	3 m
UASP-stöd:	Ja