E-flite EFLM3032DFA Bruksanvisning

Läs gratis den bruksanvisning för E-flite EFLM3032DFA (4 sidor) i kategorin Radiostyrda leksaker. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 8 recensioner. Har du en fråga om E-flite EFLM3032DFA eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

BL32 Ducted Fan 2150 Kv Brushless Motor Instructions

Thank you for purchasing the E-flite BL32 DF Brushless Motor. This motor is an ideal choice for products

such as E-flite’s Habu 32 DF and other similar sized ducted fan airplanes when using the purpose-built

Delta-V 32 80mm EDF (EFLDF32). The motor will provide great performance in 80mm diameter fan units

requiring a 28mm inrunner motor.

BL32 DF 2150Kv Motor Features:

• Purpose-built for the Delta-V 32 80mm EDF unit (EFLDF32)

• Ideal for 80mm EDF units

• Up to 1,400 continuous input watts or 1,665 maximum burst

• High-quality construction with ball bearings and hardened steel shaft

• Includes mounting hardware

• 6-pole design

BL32 DF Specifications

Diameter: 28.0mm (1.10 in)

Case Length: 52.0mm (2.00 in)

Weight: 162g (5.70 oz)

Shaft Diameter: 5mm

EFLM3032DFA

Kv: 2150 (rpms per volt)

Io: 2.60A @ 20V (no load current)

Ri: 0.026 ohms (resistance)

Continuous Current: 65A*

Max Burst Current: 75A*

Cells: 4S-6S Li-Po or 14-18 Ni-MH/Ni-Cd

Recommended Ducted Fan Unit: Delta-V 32 80mm EDF (EFLDF32)

Brushless ESC: 70A – 80A

Installed Data*

Installed Static Thrust: 4.50 lbs

RPM: 38,500

Watts: 1,400

Current: 62A

* Data measured installed in Habu 32 DF using E-flite Delta-V 32 80mm EDF & 6S 5000mAh 30C Battery

(EFLB50006S30).

Static Data*

Static Thrust: 5.40 lb on 6S (21.9V)

RPM: 39,640 on 6S (21.9V)

Watts: 1,160 on 6S (21.9V)

Current: 53A on 6S (21.9V)

*Data measured in lab conditions using E-flite Delta-V 32 80mm EDF with bell mouth intake and tail pipe

measuring 159mm in length with 72.0mm exit diameter

* Maximum Operating Temperature: 220 degrees Fahrenheit

* Adequate cooling is required for all motor operation at maximum current levels.

* Maximum Burst Current duration is 15 seconds. Adequate time between maximum burst intervals is

required for proper cooling and to avoid overheating the motor.

Produktspecifikationer