EC Line EC-PM-7645II Bruksanvisning

EC Line Skrivare EC-PM-7645II

Läs gratis den bruksanvisning för EC Line EC-PM-7645II (6 sidor) i kategorin Skrivare. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 7 recensioner. Har du en fråga om EC Line EC-PM-7645II eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/6
Specification
EC-7645 XX
IMPACT DOT-MATRIX RECEIPT PRINTER
Connection
a. Connect the adapter cable to power connector of the printer.
b. Connect the interface cable to the connector on the rear panel of the printer.
c. Connect the cash drawer’s RJ-11 jack to the connector on the rear panel.
Installation of Paper Roll and Ink Ribbon
Please install after turn on the printer with indicators are on.
a. Open the top cover
b. Install the paper roll as the picture showing direction
c. Insert the end of the bottom paper into the paper take-up spool; be sure that the paper
is aligned with the spool’s flange so that the paper is taken up by the spool.
d. Cut redundant paper by the cutter.
e. Open the printer’s cover, turn the knob five or six times in the direction of the arrow,
insert the ink ribbon, and push the ribbon cassette down until it clicks.
A
B C
Set Print Mode (DIP Switch)
Set print mode by the DIP Switch, such as Black mark, Cutter, Language, Beep, Density,
Speed mode
a
b
c
d
e

Produktspecifikationer

Varumärke: EC Line
Kategori: Skrivare
Modell: EC-PM-7645II

Behöver du hjälp?

Om du behöver hjälp med EC Line EC-PM-7645II ställ en fråga nedan och andra användare kommer att svara dig