Edifier Comfo Flex Bruksanvisning

Edifier hörlur Comfo Flex

Läs gratis den bruksanvisning för Edifier Comfo Flex (8 sidor) i kategorin hörlur. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 2 recensioner. Har du en fråga om Edifier Comfo Flex eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/8
EN 1. Power ON/OFF
2. First pairing
3. Pairing for new device
7. Charging
6. Controls
Manual
Input: 5V 200mA (Earbuds) 5V 1A (Charging case)
Note: Make sure the USB po is completely d before charging.
4. Reset
Open or close the case to power on/o.
1. Once powered on, the earbuds will automatically enter Bluetooth
pairing mode.
2. Select "EDIFIER Comfo Flex" from your device list to connect.
1. Place the earbuds in the case and keep it open.
2. Press and hold the button on the case for 3s until white and
orange LED blink.
Note: For subsequent use, the earbuds will automatically connect
to the device used last time.
1. Place the earbuds in the case and keep it open.
2. Press the button on the case 3 times, white LED will blink until the
reset is complete.
Comfo Flex
Open-ear True Wireless Earbuds
5. Multipoint connection
1. Pair device A with the earbuds manually and keep the earbuds in
the case.
2. Re-enter Bluetooth pairing and select "EDIFIER Comfo Flex" in
device B settings to connect.
3. Select "EDIFIER Comfo Flex" again in device A settings to complete
the multipoint connection.
Note: For subsequent use, the earbuds will automatically reconnect
to the two devices used last time.
1s
1s
x3
EDIFIER Comfo Flex
Bluetooth
x3
EDIFIER Comfo Flex
Bluetooth
A
EDIFIER Comfo Flex
Bluetooth
A
B
3s
EDIFIER Comfo Flex
Bluetooth
3s
Note:
1. "x2" double tap; "x3" triple tap; "" press and hold;
2. Download EDIFIER ConneX App to customize more control settings.
Call
L R
x3
x2
x2
x2
x2
x3
Music
L R
x3
x3
x2
x2
Entrée: 5 V 200 mA (Écouteurs) 5 V 1 A (Étui-chargeur)
Remarque : Assurez-vous que le po USB est paaitement sec
avant d’eectuer la charge.
4. Réinitialiser
1. Placez les écouteurs dans l’étui et laissez-le ouve.
2. Appuyez 3 fois sur le bouton sur l'étui, le voyant LED blanc clignote
jusqu’à ce que la réinitialisation soit terminée.
6. Commandes
FR 1. Allumer/Éteindre
2. Première association
3. Association pour un nouvel appareil
7. Charger
Ouvrez ou fermez l’étui pour allumer/éteindre.
1. Une fois allumés, les écouteurs passeront automatiquement en
mode d'association Bluetooth.
2. Sélectionnez «󶀅EDIFIER Comfo Flex󶀅» dans la liste de votre appareil
pour vous connecter.
1. Placez les écouteurs dans l’étui et laissez-le ouve.
2. Maintenez le bouton sur l’étui enfoncé pendant 3 s jusqu’à ce que
les voyants LED blanc et orange clignotent.
Remarque : Les écouteurs se connecteront automatiquement au
dernier appareil associé lorsque vous les allumerez dans le futur.
1. Associez l’appareil A aux écouteurs manuellement et ne soez
pas les écouteurs.
2. Revenez au mode d'association Bluetooth et sélectionnez
« EDIFIER Comfo Flex » dans les paramètres de l'appareil B pour
vous connecter.
3. Sélectionnez une nouvelle fois «󶀅EDIFIER Comfo Flex󶀅» dans les
paramètres de l’appareil A pour le connecter et activer la connexion
multipoint.
Remarque : Lors d'une utilisation ultérieure, les écouteurs se
reconnectent automatiquement aux deux appareils utilisés la dernière
fois.
5. Connexion double appareil
1s
1s
x3
EDIFIER Comfo Flex
Bluetooth
x3
EDIFIER Comfo Flex
Bluetooth
A
EDIFIER Comfo Flex
Bluetooth
A
B
3s
EDIFIER Comfo Flex
Bluetooth
3s
Remarque :
1. «󶀅x2󶀅» toucher deux fois; « p2-x3 » toucher trois fois; « — » maintenir
enfoncé;
2. Téléchargez l'appli EDIFIER ConneX pour des réglages de contrôle
plus personnalisables.
L R
x3
x2
x2
x2
x2
x3
Appel
Musique
L R
x3
x3
x2
x2


Produktspecifikationer

Varumärke: Edifier
Kategori: hörlur
Modell: Comfo Flex

Behöver du hjälp?

Om du behöver hjälp med Edifier Comfo Flex ställ en fråga nedan och andra användare kommer att svara dig