Edision OS MINI 4K S2X Bruksanvisning

Edision mottagare OS MINI 4K S2X

Läs gratis den bruksanvisning för Edision OS MINI 4K S2X (2 sidor) i kategorin mottagare. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 6.5 recensioner. Har du en fråga om Edision OS MINI 4K S2X eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
Congratulations on purchasing an
EDISION OS MINI 4K S2X
Please note that this information is valid at the time of publication.
Current information and detailed user manuals can be found on the Internet at: www.edision.gr
Unpacking
Connecting and switching on
Remote control with 2 AAA batteries Documentation Service note
1
2
Receiver EDISION OS MINI 4K S2X
Notes: The front is factory tted with a protective foil
which can be removed easily and with caution. (Protective foil only for devices with display)
The scope of delivery may also include parts not listed here
Front Panel
1 POWER button: Activates/Deactivates the device
2 CH- / CH+ buttons: for moving in the program lists
3
Infrared sensor for the reception of remote
control commands
4
Display LED, displays current information
Back Panel
5 LNB S2X IN: Connection for the coaxial cable
to the signal from the satellite system
6 S/PDIF: Audio interface for amplier/audio console
7 HD OUT: Connection to an HDTV quality TV
8
/ USB 1: Connection for USB storage devices
9 ETHERNET: Ethernet port RJ45 10/100 Mbps
10
/ USB 2: Connection for USB storage devices
11
IR IN: Infrared connection port
12
RS 232: For connecting to a PC,
using RS-232 cable, for receiver software update
13
Connection for an adapter (DC 12V/2,0A)
14
Card reader
Note: For interference-free satellite TV reception,
a specialist technician must calibrate your satellite
TV system with a digital TV level meter
Connect the receiver using via HDMI cable
the HD OUT output port to your TV’s HDMI input port
Now connect the receiver to the satellite and
antenna cable via the input. LNB
Insert the batteries into the remote control.
Notes on the remote control can be found on
the back of these instructions.
Connect the receiver to the power supply.
The receiver starts with the BOOT process
and is operational within a short time
Please contact
your EDISION
specialist dealer
for any further
support
and service.
OS MINI 4K S2X
4 K L i n u x S a t R e c e i v e r
38mm
130mm
180mm
LNB IN S2X 13/18V
400mA MAX
HD OUT
ETHERNET USB 2 IR IN RS 232 DC 12V/2 0 A
S/PDIF
CA
USB 1
1
HDMI in
2
HD im
ka el
HDMI
kabel
Power socket
HD OUT:
Output receiver
HDMI cable
TV set connection panel
Use an HDMI input!
LNB:
Connecting
the cable to the satellite
signal
coaxial-wire Antenna
The CE certificate of the product is available on our webpage, by visiting this link: https://www.edision.gr/en/support
POWER CH- CH+
OS mini 4K
1 2
3
4
LNB IN S2X 13/18V
400mA MAX
HD OUT
ETHERNET USB 2 IR IN RS 232 DC 12V/2,0 A
S/PDIF
CA
USB 1
5 6 8 9 10 1211 13
14
15
7
For information about matters, please contact EDISION Hardware or Software support@edision.gr


Produktspecifikationer

Varumärke: Edision
Kategori: mottagare
Modell: OS MINI 4K S2X

Behöver du hjälp?

Om du behöver hjälp med Edision OS MINI 4K S2X ställ en fråga nedan och andra användare kommer att svara dig