Eizo ColorEdge CG2730 Bruksanvisning
Läs gratis den bruksanvisning för Eizo ColorEdge CG2730 (116 sidor) i kategorin Övervaka. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 7.5 recensioner. Har du en fråga om Eizo ColorEdge CG2730 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/116
Important
Please read this User’s Manual carefully to familiarize yourself with
safe and effective usage.
• The latest software and User’s Manual are available for download
from our web site:
http://www.eizoglobal.com
Ver. 6.4
2About This Manual
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.
EIZO Corporation is under no obligation to hold any submitted material or information condential unless prior
arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every effort has been
made to ensure that this manual provides up-to-date information, please note that specications are subject to change
without notice.
About This Manual
This manual describes the features, installation, and usage of the Color Management Software “ColorNavigator”.
This manual consists of the following four sections.
INSTALLATION Describes software introductory information such as how to install it and how to
connect with the measurement device and the monitor.
P.5
BASIC Describes basic software operations necessary to adjust the monitor. P.20
APPLICATION Describes applicable operations such as manual adjustment and prole
emulation. Advanced knowledge regarding color management and computers is
required.
P.51
REFERENCE Provides supplementary explanations and reference information such as
SelfCalibration / SelfCorrection settings and troubleshooting.
P.84
3
CONTENTS
CONTENTS
About This Manual 2 ................................................
CONTENTS 3 .............................................................
INSTALLATION ............................... 5
Chapter 1 Introduction ....................................... 6
1-1. About ColorNavigator .................................. 6
1-2. About ColorNavigator License .................... 6
●How to Check License Registration 6 ................
1-3. Features ......................................................... 7
1-4. Main Window 8 .................................................
●About Marks ...................................................10
Chapter 2 Setting Up ........................................ 11
2-1. System Requirements .................................11
2-2. Installing Software ....................................... 14
●Macintosh .......................................................14
●Windows .........................................................17
2-3. Connecting Monitor with Measurement
Device ............................................................19
2-4. Uninstalling Software ..................................19
●Macintosh .......................................................19
●Windows .........................................................19
BASIC ........................................... 20
Chapter 3 Starting Up and Quitting ................ 21
3-1. Starting Up ColorNavigator ........................21
●Macintosh .......................................................21
●Windows 10 ....................................................21
●Windows 8.1 ...................................................21
●Windows 7 ..................................................... 22
3-2. Displaying Software Version ..................... 22
3-3. Quitting ColorNavigator ............................. 23
●Macintosh ...................................................... 23
●Windows ........................................................ 23
Chapter 4 Adjusting Monitor ........................... 24
4-1. Preparing Adjustment ................................ 24
4-2. Adjusting Monitor ....................................... 25
Chapter 5 Creating Adjustment Target .......... 32
Chapter 6 Periodic Adjustment ....................... 45
6-1. Timer ............................................................. 45
6-2. About SelfCalibration / SelfCorrection .... 45
Chapter 7 Validating Adjustment Status
of Monitor ........................................ 46
APPLICATION ............................... 51
Chapter 8 Setting Monitor Validation ............. 52
8-1. Importing the Validation Target ................ 52
8-2. Deleting Validation Target.......................... 54
Chapter 9 Customizing Adjustment Target ... 55
9-1. Exporting and Importing the Adjustment
Target ............................................................ 55
9-2. SettingaProlePolicy ............................... 56
9-3. Setting Destination Folder for ICC
ProleSaving .............................................. 57
9-4. CreatingProleEmulationData ................ 59
9-5. Manual Adjustment ......................................61
9-6. Adjusting Light Booth ................................ 65
Chapter 10
Customizing Monitor Adjustment
... 70
10-1. Setting Measurement Device......................70
10-2. Standard Mode calibration .........................71
Chapter 11 Creating Film Emulation Data ....... 72
Chapter12 CreatingICCProleofTablet/
Display Device ................................ 73
12-1. CreatingICCProleofTablet/Display
Device to be Emulated.................................74
12-2. SavingICCProle ....................................... 80
12-3. Exporting and Importing the
Measurement Result ....................................81
12-4. Creating Average Value from
Measurement Result ................................... 82
12-5. SettingICCProleCreationProcedure ... 83
12-6. Deleting Measurement Result ................... 83
REFERENCE ................................ 84
Chapter 13 Making Use of the Built-in
Calibration Sensor / Built-in
Correction Sensor .......................... 85
13-1. About Built-in Calibration Sensor / Built-
in Correction Sensor .................................. 85
13-2. Correlate with the Reference
Measurement Device .................................. 85
13-3. Setting the SelfCalibration /
SelfCorrection Schedule ............................ 89
●SelfCalibration ............................................... 90
●SelfCorrection ................................................91
Chapter 14 Reference ........................................ 92
14-1. Using ColorNavigator in Multiple
Monitor Environment .................................. 92
14-2. Adjusting Monitor with Multiple PCs
Connected .................................................... 93
14-3. Using ColorNavigator Agent ..................... 94
●Available Functions ....................................... 94
●Active Icon ..................................................... 94
●Preventing ColorNavigator to reside ............. 95
●Changing Adjusted Target ............................. 95
Produktspecifikationer
| Varumärke: | Eizo |
| Kategori: | Övervaka |
| Modell: | ColorEdge CG2730 |
Behöver du hjälp?
Om du behöver hjälp med Eizo ColorEdge CG2730 ställ en fråga nedan och andra användare kommer att svara dig
Övervaka Eizo Manualer
8 Januari 2025
8 Januari 2025
8 Januari 2025
7 Januari 2025
27 Oktober 2024
19 September 2024
19 September 2024
19 September 2024
16 September 2024
16 September 2024
Övervaka Manualer
- Dynaudio
- Tannoy
- KeepOut
- Elvid
- KRK
- Neets
- LaCie
- Xiaomi
- Drawmer
- Hitachi
- Adj
- Alesis
- Prowise
- Hanwha
- Packard Bell
Nyaste Övervaka Manualer
9 April 2025
9 April 2025
8 April 2025
8 April 2025
7 April 2025
5 April 2025
5 April 2025
4 April 2025
4 April 2025
2 April 2025