Eizo EX3 Bruksanvisning
Eizo
Mätutrustning
EX3
Läs gratis den bruksanvisning för Eizo EX3 (24 sidor) i kategorin Mätutrustning. Guiden har ansetts hjälpsam av 7 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 4 recensioner. Har du en fråga om Eizo EX3 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/24
English
Please read this User’s Manual carefully to familiarize yourself with safe and effective usage.
Please retain this manual for future reference.
PRECAUTIONS
WARNING
If the unit begins to emit smoke, smells like something is burning, or makes strange noises,
disconnect all connections immediately and contact your dealer for advice.
Attempting to use a malfunctioning unit may result in re, electric shock, or equipment damage.
Do not disassemble or modify the unit and cable.
Not doing so may result in damage, re or electric shock.
Package Contents
Please contact your local EIZO representative for assistance if any of the listed items are missing
or damaged.
• EX3 (sensor)
• User’s Manual (This manual)
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any
form or by any means, electronic, mechanical, or otherwise, without the prior written permission
of EIZO Corporation. EIZO Corporation is under no obligation to hold any submitted material or
information condential unless prior arrangements are made pursuant to EIZO Corporation’s
receipt of said information. Although every effort has been made to ensure that this manual
provides up-to-date information, please note that EIZO monitor specications are subject to
change without notice.
EIZO, EIZO Logo and ScreenManager are registered trademarks of EIZO Corporation in Japan and other countries.
ColorNavigator is a trademark of EIZO Corporation.
All other company and product names are trademarks or registered trademarks of their respective owners.
User’s Manual
1
Installing the software
ColorNavigator Software needs to be installed to enable use of EX3. Refer to the User’s Manual
for the software for further details.
How to attach the EX3
Attention
• Before attaching the EX3, remove the stains or dusts on the surface of the monitor.
1.
Connect the upstream port of monitor and the USB downstream port
of PC with the EIZO USB Cable (MD-C93) supplied with your monitor.
2.
Peel off the protective lm on the EX3 surface.
3.
Remove the cap (counterweight) from the sensor.
Sensor
Counterweight
2
English
4.
Connect the EX3 to the USB downstream port of either the PC
or the monitor.
5.
Suspend the sensor in its measuring position on the monitor by
carefully adjusting the counterweight’s position until both are in
balance.
Counterweight
Counterweight
Slide Slowly
3
Produktspecifikationer
| Varumärke: | Eizo |
| Kategori: | Mätutrustning |
| Modell: | EX3 |
Behöver du hjälp?
Om du behöver hjälp med Eizo EX3 ställ en fråga nedan och andra användare kommer att svara dig
Mätutrustning Eizo Manualer
26 Augusti 2024
Mätutrustning Manualer
- NEO Tools
- Carrier
- Wentronic
- Festo
- Toolland
- Logilink
- Oscium
- Lanaform
- LabNation
- Techno Line
- Duro Pro
- Burg-Wachter
- Dahua Technology
- Wachendorff
- Water-i.d.
Nyaste Mätutrustning Manualer
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025