Electro Harmonix 22500 Foot Controller Bruksanvisning

Läs gratis den bruksanvisning för Electro Harmonix 22500 Foot Controller (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 31 personer och har ett genomsnittsbetyg på 4.2 stjärnor baserat på 7 recensioner. Har du en fråga om Electro Harmonix 22500 Foot Controller eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

45000 FOOT CONTROLLER

Remote Foot Controller for 45000

Congratulations! You have just purchased the from 45000 FOOT CONTROLLER

Electro-Harmonix! The 45000 Foot Controller is a wired remote control for the 45000

Loopergiving your feet direct access to the followi controls: Track Select, Record, , ng

Play, Loop Up and Loop Down.

The 45000 Looper records and plays back up to 100 loops per SDHC card. The 45000

Foot Controller makes it very easy for your feet to navigate through your 100 loops,

moving up or down through loops by 1 or 10 at a time; allowing you to seamlessly

change loops while playing back. Additionally, the 45000 Foot Controller contains a

large dual-digit LED display to clearly indicate your current or next loop at all times.

- GETTING STARTED -

Connect the 45000 Foot Controller (45000 FC) to your 45000 main unit using a

standard 1/4” mono instrument cable. Plug into the jack labeled FOOT CONTROLLER

on the 45000 Looper. The other end of the cable should be inserted into the 45000

FC’s jack labeled INPUT. As long as the 45000 main unit is powered up, the digits on

the 45000 FC will light up indicating it is ready for use.

- DISPLAY AND FOOTSWITCHES -

2-DIGIT LED DISPLAY shows the currently loaded or selected loop number in –

the 45000 main unit. The numbers range from 00 to 99. If a loop number contains

audio on the SDHC card, the rightmost decimal point on the 45000 FC will light. If the

rightmost decimal point is not lit, then that particular loop number is empty.

LOOP UP/DOWN Footswitches LEDsand Pressing the LOOP UP footswitch will –

increment the loop number by 1. Press the LOOP DOWN footswitch to decrement the

loop number by 1. Press and hold either footswitch for approximately half a second to

jump up or down by ten loops at a time instead of just one.

The loop number can be changed when the 45000 is either idle (stopped) or playing

back a loop. You cannot change the loop number when recording or overdubbing the

loop. If the 45000 is playing back a loop at the time you press either the LOOP UP or

LOOP DOWN footswitches, the 2-digit display on the Foot Controller will blink the

Important: The Electro-Harmonix 45000 Foot Controller obtains all of its

power from the 4500M-Track Looping Recorder. Use only a standard 0 ulti

¼” guitar cable to connect the Foot Controller to the 45000. A standard

guitar cable has Tip and Sleeve conductors. The Foot Controller does not

require batteries or an AC Adapter.

Produktspecifikationer