Electro Harmonix Headphone Amp Bruksanvisning


Läs gratis den bruksanvisning för Electro Harmonix Headphone Amp (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 24 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 12.5 recensioner. Har du en fråga om Electro Harmonix Headphone Amp eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
HEADPHONE AMP
Congratulations on your purchase of the Electro-Harmonix HEADPHONE
AMP! Now you can rock out anywhere without disturbing your neighbors.
Simply use a 9V battery and any pair of headphones you like, as long as they
have an 1/8” plug attached to them.
— —CONTROLS
VOLUME Sets the output level.
INPUT JACK Connect the output of your instrument or effects pedal to
this 1/4" jack. The input impedance presented at the INPUT jack is 100 k .
OUTPUT JACK Insert the 1/8” stereo plug from your headphones into this
jack.
-OPERATION AND WARNINGS-
Power, from the internal 9-volt battery is activated by plugging into the
output. The headphone cable should be removed when the unit is not in use
to avoid running down the battery. A pop may occur in the headphones
when inserting or removing the plug from the headphone jack.
To change the 9-volt battery, you must remove the 4 screws on the bottom
of the . Once the screws are removed, you can take off HEADPHONE AMP
the bottom plate and change the battery. Please do not touch the circuit
board while the bottom plate is off or you may damage a component.


Produktspecifikationer

Varumärke: Electro Harmonix
Kategori: Inte kategoriserad
Modell: Headphone Amp

Behöver du hjälp?

Om du behöver hjälp med Electro Harmonix Headphone Amp ställ en fråga nedan och andra användare kommer att svara dig