Electro Harmonix Holy Stain Bruksanvisning
Electro Harmonix
Inte kategoriserad
Holy Stain
Läs gratis den bruksanvisning för Electro Harmonix Holy Stain (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 19 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 10 recensioner. Har du en fråga om Electro Harmonix Holy Stain eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
HOLY STAIN
EH Multi Effect Pedal
Distortion/Reverb/Pitch Shift/Tremolo
Congratulations on your purchase of the Holy Stain: the first multi-effect pedal from Electro-
Harmonix. The Holy Stain is comprised of two stages: an analog distortion and a DSP. Two
types of distortion are available: Fuzz and Drive. There are four DSP functions: Room Reverb,
Hall Reverb, Pitch Shift and Tremolo. can choose from one distortion mode and one DSP One
mode at a time or bypass either stage. Please read further to learn how to fully operate your
Holy Stain.
- EFFECT DESCRIPTIONS -
DISTORTION
The Distortion section of the Holy Stain is made up of 4 controls: DIRT, COLOR, TONE and
VOLUME. DIRT and COLOR are both rotary switches while TONE and VOLUME are rotary
potentiometers.
The control allows you to change the type of distortion from Clean to Fuzz to Drive. The DIRT
Drive setting gives you a smooth distortion. The Fuzz setting is a harder edged distortion
compared to the Drive setting. Use the setting to bypass the distortion. Clean Please note:
the Clean setting is part of the distortion circuit so you may still hear a little grit when set to
Clean.
The Holy Stain has two controls to help tailor your distortion’s tone: COLOR and TONE. The
COLOR switch subtly changes the character of the distortion using three settings: Bright, Dark
and Warm. Use the Bright setting for a full frequency distortion. Choose the Dark setting to cut
high frequencies for a smoother distortion. The Warm setting is somewhere in between the
other two giving a rounder distortion. Please note: when DIRT is set to Clean, the COLOR
switch has no effect on the tone except that in Warm mode your sound may be slightly
distorted, depending on the volume of your pickups. The knob is a drastic tone control TONE
that, when set to extremes, will allow you to emphasize the highs or lows. Set TONE to the
middle for a nice, even, full frequency sound.
The control sets the overall output volume from the distortion stage. The output of VOLUME
the distortion stage is sent directly into the input of the DSP.
ROOM and HALL REVERB
The two reverb settings are excellent sounding, easy-to-use reverbs. The primary difference
between the Room and Hall reverbs is the pre-delay time. The Hall setting has a longer pre-
delay as compared to the Room. Pre-delay is the delay time between playing a note and hearing
the onset of the reverb effect.
All four DSP functions allow you to change their sound using the AMOUNT knob. The AMOUNT
knob’s function changes with each setting. For the two reverbs: the AMOUNT knob sets the
reverb time or length of reverb tail. As you turn the AMOUNT knob clockwise the reverb time
will increase.
Produktspecifikationer
| Varumärke: | Electro Harmonix |
| Kategori: | Inte kategoriserad |
| Modell: | Holy Stain |
Behöver du hjälp?
Om du behöver hjälp med Electro Harmonix Holy Stain ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Electro Harmonix Manualer
2 April 2025
2 April 2025
2 Januari 2025
30 December 2025
30 December 2025
30 December 2025
30 December 2025
5 December 2024
24 September 2024
24 September 2024
Inte kategoriserad Manualer
- Wampler
- Sunwoda
- Newland
- Thinkware
- Protector
- Ferguson
- T'nB
- Nilox
- Botex
- Create
- Prologue
- Elite Screens
- Patching Panda
- Berger & Schröter
- Paingone
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025