Electro Harmonix Nano Looper 360 Bruksanvisning
Sidor 4 Engels Inte kategoriserad
Läs bruksanvisningen för Electro Harmonix Nano Looper 360 gratis online eller ladda ner PDF:en. 30 personer har tyckt att guiden var hjälpsam. Fråga om modellen? Ställ en fråga
1
NANO LOOPER 360
Compact Looper
Congratulations on your purchase of the Nano Looper 360The Nano Looper 360 is ! a
small, extremely easy to use looper with a total of -seconds of loop recording time. Not 360
only that, the available 360 seconds can be divided into 11 different Loops, so you get the
most out of the available memory! You can think of the Nano Looper 360 as your very own
“Loop Locker. ”
WARNING: Your Nano Looper 360 comes equipped with an Electro-Harmonix 9.6DC-
200BI power supply (same as used by Boss
®
& Ibanez
®
: 9.6 Volts DC 200mA). The Nano
Looper 360 requires 90mA at 9VDC with a center negative plug. Using the wrong adapter
or plug polarity may damage your unit and void the warranty.
––FEATURES
-6 minutes of loop recording time
-selectableindependent Loops11 , , that remain in memory until you erase them
-High qualityuncompressed audio: -bit A/D/A, 44.1k Sample Rate , 24Hz
-Intuitive looping interface
-Undo-Redo function
-Unlimited overdubbing
-Small pedal board footprint
-AC Adapter Included
-tionally may use 9V Alkaline Battery, battery life: approximately 4 hours of operation Op
(varies on conditions of use)
––CONTROLS
LEVEL Knob –Controls the output level of the Loop. Your dry signal remains at unity
signal level from input to output. The dry signal also remains analog throughout the . 360
LOOP Knob Selects number: 1-11. When scrolling through loops, the –LoopMEM LED
flash quickly during transitions. If the loop has no recorded memory, the esMEM LED
remains off. If the loop has recorded memory, the remains and playback can MEM LEDon
begin.
INPUT Jack Nano Looper 360. The input –This ¼” jack is the audio input for the
impedance is 2.2M.
OUTPUT Jack Nano Looper 360. The output –This ¼” jack is the audio output from the
impedance is 470.
9V Power Jack– Plug the output of the supplied AC adapter into the 9V power jack
located at the top of the Nano Looper 360. The Nano Looper 360 draws mA at 9VDC 90
with a center negative plug. The Nano Looper 360 accepts Boss
®
and Ibanez
®
style AC
Adapters.
Produktspecifikationer
| Varumärke: | Electro Harmonix |
| Kategori: | Inte kategoriserad |
| Modell: | Nano Looper 360 |
Behöver du hjälp?
Om du behöver hjälp med Electro Harmonix Nano Looper 360 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Electro Harmonix Manualer
Electro Harmonix Deluxe Big Muff Pi Bruksanvisning Electro Harmonix Bad Stone Bruksanvisning Electro Harmonix LPB-1 Bruksanvisning Electro Harmonix Pitch Fork+ Bruksanvisning Electro Harmonix Canyon Bruksanvisning Electro Harmonix Ring Thing Bruksanvisning Electro Harmonix Super Space Drum Bruksanvisning Electro Harmonix Slap-Back Echo Bruksanvisning
Populära i Inte kategoriserad
Electro Harmonix Bassballs Bruksanvisning Electro Harmonix Cock Fight Plus Bruksanvisning Electro Harmonix Tube EQ Bruksanvisning