Electro Harmonix Triple Foot Controller Bruksanvisning
Electro Harmonix
Växla
Triple Foot Controller
Läs gratis den bruksanvisning för Electro Harmonix Triple Foot Controller (2 sidor) i kategorin Växla. Guiden har ansetts hjälpsam av 15 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 8 recensioner. Har du en fråga om Electro Harmonix Triple Foot Controller eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
TRIPLE FOOT CONTROLLER
Congratulations on your purchase of the Electro-Harmonix Triple Foot
Controller! The Triple Foot Controller is a compact, easy- -use utility to
pedal providing remote foot-control for devices with external footswitch
jacks. It works great with the Electro-Harmonix Grand Canyon
®
Delay &
Looper, 720 Stereo Looper , Superego+ Synth Engine, Mod Rex ™ ™ ™
Polyrhythmic Modulator, Super Pulsar Tremolo and many other pedals ™,
and devices made by both Electro-Harmonix and other manufacturers.
The Triple Foot Controller can also be used as an external tap-tempo
footswitch for a large variety of pedals.
- USING THE TRIPLE FOOT CONTROLLER -
Use the supplied Tip-Ring-Sleeve (TRS) cable* to connect the Triple Foot
Controller (TFC) to the device you want to control. Attach the cable to the
phonejack on the TF and to the proper jack on the device it controls. We C
recommend the device powered down while making the connection. be
The Triple Foot Controller has three footswitches. The it polarity for sw ch
all three footswitches normally open (NO). They work as follows: is
T – When this switch is pressed down, the Tip and Sleeve are electrically
shorted together. If you connect a standard Tip-Sleeve (TS) instrument
cable to the TFC, o y the T footswitch provides control to the other nl
device.
R – When this switch is pressed down, the Ring and Sleeve on the TRS
cable are electrically shorted together.
T+R – When this switch is pressed down, both the Tip and Ring are
electrically connected to the Sleeve of the TRS cable. The T+R footswitch
simultaneously activates both the Tip and Ring on the TRS cable. When
using a TS cable, the T+R footswitch might also activate the T conductor.
Please note: the exact function of each TFC footswitch depends on the
device to which it is connected. Please refer to the user manual device’s
for more information on the functions assigned to each TFC footswitch.
*
Use a standard T -Sleeve instrument cable single footswitch control the T ip for on
footswitch In this scenario, the Triple Foot Controller works great as a TAP footswitch for .
the Electro-Harmonix Canyon, DMMTT, or other devices.
Produktspecifikationer
| Varumärke: | Electro Harmonix |
| Kategori: | Växla |
| Modell: | Triple Foot Controller |
Behöver du hjälp?
Om du behöver hjälp med Electro Harmonix Triple Foot Controller ställ en fråga nedan och andra användare kommer att svara dig
Växla Electro Harmonix Manualer
2 September 2024
27 Augusti 2024
26 Augusti 2024
Växla Manualer
- Intertechno
- Eaton
- Ebode
- Yamaha
- Roline
- Luxul
- Perel
- Kemo
- GEV
- PureTools
- Kopp
- Robbe
- Dormakaba
- KVM-TEC
- Crestron
Nyaste Växla Manualer
9 April 2025
9 April 2025
7 April 2025
5 April 2025
5 April 2025
5 April 2025
5 April 2025
3 April 2025
3 April 2025
2 April 2025