Electronics Line Prime Bruksanvisning
Electronics Line
Säkerhet
Prime
Läs gratis den bruksanvisning för Electronics Line Prime (32 sidor) i kategorin Säkerhet. Guiden har ansetts hjälpsam av 17 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 9 recensioner. Har du en fråga om Electronics Line Prime eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/32
-2-
infinite prime User Manual - Version 3.00
Catalog Number: 5IN1912
All data is subject to change without prior notice.
Hereby, Electronics Line 3000 Ltd. declares that this control panel is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
Copyright © 2012 Electronics Line 3000 Ltd. All rights reserved.
-3-
Quick Reference Guide
Function Press Additional Information
SET
If “One-Key Setting” is disabled enter your user
code when setting.
The default Master code is 1234.
INSTANT SET
Hold down this key until
“Instant Setting OK?” is
displayed. Then Press √.
Instant setting cancels the entry delay after Part or
Perimeter setting. This feature can be enabled by
your engineer.
UNSET [USER CODE] Entering your user code also silences the sounder
in the event of an alarm.
PANIC
ALARM +
Press these keys together and hold them down to
generate an alarm.
FIRE
ALARM +
MEDICAL
ALARM +
MENU MODE then [USER CODE]
Use the menu navigation keys (/) until the required
menu item is displayed then press √. Alternatively, enter
the shortcut (e.g. 21 for Omit Zones).
CHECK
TROUBLE
CONDITIONS Use this key scroll the
system trouble list
Pressing also silences any trouble tones that
may be sounded by the system.
SWITCH HA/PGM
UNIT ON then [HA UNIT #]
Enter the HA module number in two digits
(e.g. 03, or 30 for PGM ).
SWITCH HA/PGM
UNIT OFF then [HA UNIT #]
SERVICE CALL
Hold down this key until
“Service Call Dialing” is
displayed.
The number dialed for the service call is
programmed by your engineer.
GLOBAL
CHIME then
Use the menu navigation keys ( / ) to choose
enable or disable, then press √.
RECORD
MESSAGE then After recording a message, “Message Waiting” is
displayed until the message is played back.
The Message Center is an optional feature that is
included with certain versions of . infinite prime
PLAY
MESSAGE then
Telecontrol Commands
Function Press Function Press
2-WAY AUDIO UNSET
FULL SET SOUNDER CANCEL
HA UNIT XX ON* then EXTEND CALL
HA UNIT XX OFF* then DISCONNECT then
* for PGM XX=30
OR OR
Produktspecifikationer
| Varumärke: | Electronics Line |
| Kategori: | Säkerhet |
| Modell: | Prime |
Behöver du hjälp?
Om du behöver hjälp med Electronics Line Prime ställ en fråga nedan och andra användare kommer att svara dig
Säkerhet Electronics Line Manualer
30 Augusti 2024
30 Augusti 2024
29 Augusti 2024
24 Augusti 2024
19 Augusti 2024
6 Augusti 2024
5 Augusti 2024
Säkerhet Manualer
- NetworX
- Powerfix
- Abus
- Theben
- Goobay
- RISCO Group
- Juwel
- SmartHome
- Smanos
- Voxx
- Eden
- Brennenstuhl
- Directed Electronics
- Nest
- Indexa
Nyaste Säkerhet Manualer
19 Februari 2025
12 Januari 2025
7 Januari 2025
7 Januari 2025
24 Oktober 2024
22 Oktober 2024
21 Oktober 2024
20 Oktober 2024
20 Oktober 2024
Axis Camera Station S9001 Mk II Desktop Terminal Bruksanvisning
19 Oktober 2024