Eliminator Lighting Stealth Beam Bruksanvisning


Läs gratis den bruksanvisning för Eliminator Lighting Stealth Beam (6 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 24 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 12.5 recensioner. Har du en fråga om Eliminator Lighting Stealth Beam eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/6
STEALTH BEAM
©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com
Introduction:
The Stealth Beam is a DMX intelligent moving head unit. The Stealth Beam has 3 operating modes;
sound active mode, show mode, or controlled via DMX controller. The Stealth Beam has 2 DMX
Channel modes; 5 or 17 channels. The unit can be run as a stand alone unit or in a Master/Slave set
up. This unit has been tested and there is no assembly required. Follow the instructions on the
following pages to operate your fixture. To enhance the beams effects you can use a fog machine.
CAUTION! Please read and understand these instructions before installing or operating this unit.
SPECIFICATIONS:
Model: Stealth Beam
Supply Voltage: 100V-240V 50/60Hz
LED: 1 x 60W RGBW 4-in-1 LED
Weight: 8.5lbs./ 3.8 kgs.
Size: 5.75” (L) x 9.4” (W) x 11.22” (H)
Fuse: 2 Amp
Power Consumption: 75W
Working Position: Any Safe position
Duty Cycle: None
DMX Channels: 2 DMX Channel Modes:
5 Channel Mode &
17 Channel Mode
Colors: RGBW
Warranty: 1 Year
CAUTION! Please read and
understand these instructions
before installing or operating
this unit.
Fuse Replacement: Locate and remove
the unit’s power cord. Once the cord
has been removed, the fuse holder is
located inside the power socket. Insert
a flat-head screw driver into the fuse
holder and gently pry out the holder.
Remove the bad fuse and replace with
a new one. The fuse holder has a built-in
second holder for a spare fuse.


Produktspecifikationer

Varumärke: Eliminator Lighting
Kategori: Inte kategoriserad
Modell: Stealth Beam

Behöver du hjälp?

Om du behöver hjälp med Eliminator Lighting Stealth Beam ställ en fråga nedan och andra användare kommer att svara dig