Elro EC11 Bruksanvisning


Läs gratis den bruksanvisning för Elro EC11 (2 sidor) i kategorin Smarth hem. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.1 stjärnor baserat på 5.5 recensioner. Har du en fråga om Elro EC11 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
1
Wireless Energy Meter
The instruments are designed to provide accurate and reliable measurements.Before setting up the meter,please read these
instructions carefully.
Main set function:
The main set work on battery,can be put on an indoor desktop, it can display datas as the following:
1. Display current clock.
2. Display temperature and humidity.
3. Display line voltage.
4. Display line current.
5. Display line power.
6. Display and memory each channel accumulative Kwh.
7. Display and memory greenhouse gas emossion.
8. Display and memory accumulative total Kwh..
9. Display and memory total on time and total electric charge.
10. Display and memory total on time and total electric charge of price1.
11. Display and memory total on time and total electric charge of price2.
12. Receive max. 3 channel wireless remote transmitter.
Transmitte set function:
The transmitter acquisition voltage, current, power and transmitt them to main set,then display on main set. Plug the remote
transmitter into power socket, then plug an appliance into the transmitter. The transmitter can transmit up to 30 meters without outside
interference(e.g. metal surface,electrical device,ect).
I. Key
MODE key
SET key
PRICE key
CODE key
UP key
CLR key
CLK/ARM key
II. Operating instruction
1. Choice of display mode:
(1)Press key,the data display line voltage,line current,line power,Kwh,greenhouse gas emossion. MODE
(2)Press key,the data display accumulative total Kwh, total on time and total electric charge of price1, total on time and total PRICE
electric charge of price2.
2. Clock set
Press key for over 3 seconds to set week firstly,press key to set week;then Press key to set hour, press key to set SET UP SET UP
hour; then Press key to set minute, press key to set minute,comeback clock display mode if no key-press operation is SET UP
performed after 15 seconds or press key.CLK/ARM
3. Clock alarm set
Press key under clock display mode to enter alarm display mode. Press key to set hour first, press CLK/ARM SET UP key to set hour;
then Press key to set minute, press key to set minute. Return to clock display at press of key, and icon will SET UP CLK/ALM
display and flicker if alarm is set.
Alarm starts at appointed time: when alarm starts at appointed time, buzzer will give off “BEEP” sound and stops after 60 seconds;
press any key to stop alarm within 60 seconds. Press key to cancel alarm during alarm setting. CLR
4. Price set
Press key once and release,Then press and hold key for 5 seconds during display state of total Kwh or price.PRICE PRICE
(1). Setting price : 1
(a). Press key once and release, display, the first digital flash, press button to set it. SET SET COST/kWh UP
(b). Press key once again and release, the second digital flash, press button to set it. SET COST/kWh UP
(c). Press key once again and release, the third flash, press button to set it. SET COST/kWh UP
(d). Press key once again and release, the fourth flash, press button to set it. SET COST/kWh UP
(e). Press key once again and release, the radix point flash, press button to set it. SET COST/kWh UP
(f). Press key once again and release, the weekday flash, press button to set it. SET UP
(g). Press key once again and release, the hour of flash, press button to set it. SET ON TIME UP
(h). Press key once again and release, the minute of flash, press button to set it. SET ON TIME UP
(2). Setting price : 2


Produktspecifikationer

Varumärke: Elro
Kategori: Smarth hem
Modell: EC11

Behöver du hjälp?

Om du behöver hjälp med Elro EC11 ställ en fråga nedan och andra användare kommer att svara dig