Eltako DSZ15DE-3x80A Bruksanvisning

Läs gratis den bruksanvisning för Eltako DSZ15DE-3x80A (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 28 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 3 recensioner. Har du en fråga om Eltako DSZ15DE-3x80A eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Maximum current 3x80 A. Standby loss 0.5 watt per path only.

Modulair device for DIN-EN 60715 TH35 rail mounting in distribution cabinets with IP51 protection

class. 4 modules = 70 mm wide and 58 mm deep.

Accuracy class B (1%). With S0 interface as standard.

It measures active energy by means of the current between input and output. The internal

power consumption of 0.5 watt active power per path is neither metered nor indicated. Like

all meters without declaration of conformity (e.g. MID), this meter is not permitted for billing.

1, 2 or 3 phase conductors with max. currents up to 80A can be connected. The inrush current

is 40 mA.

The N terminal must always be connected.

The consumption value is stored in non-volatile memory and is displayed again immediately

after a power failure.

The 7 segment LC display is also legible twice within a period of 2 weeks without power

supply.

Power consumption is shown by a bar  ashing at a rate of 100 times per kWh.

Designed as standard for using as double-tariff meter: Switch over to a second tariff by applying

230 V to terminals E1/E2.

On the right next to the display are the keys MODE and SELECT.

Press them to scroll through the menu. First the background lighting switches on. The dis-

play then shows the total active energy per tariff, the active energy of the resettable memory

RS1 or RS2 as well as the instantaneous values of consumption, voltage and current per phase.

Error message (false)

When the phase conductor is missing or the current direction is wrong 'false' and the cor-

responding phase conductor are indicated on the display.

Typical connection:

4-wire-connection 3x230/400 V

Three-phase energy meter DSZ15DE-3x80A with display,

without MID

GB

Temperature at mounting location: -25°C up to +55°C.

Storage temperature: -25°C up to +70°C.

Relative humidity: annual average value <75%.

28 380 615 - 1

Only skilled electricians may install this electrical equipment otherwise there is the risk

of re or electric shock!

Menu guidance

Manuals and documents in further languages

http://eltako.com/redirect/DSZ15DE-3*80A

1.App 2. 3.

www.

Produktspecifikationer