Emerson SA1-09001 Bruksanvisning

Emerson Inte kategoriserad SA1-09001

Läs gratis den bruksanvisning för Emerson SA1-09001 (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 4.5 recensioner. Har du en fråga om Emerson SA1-09001 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

GEIST™ SWITCH IRA

AIRFLOW MANAGEMENT DEVICE

Quick Installation Guide

VM1191/590-2233-501A 1

Models:

SA1-09001

Switch Type:

Side air intake-side air exhaust 9U

switch or two devices with an 18U

switch

CAUTION: Ensure the required

airflow for safe operation of

equipment is not compromised

when installing the Geist SwitchAir

device.

WARNING: Take precaution to

avoid interference with the switch’s

input power cords when installing

behind a live switch.

1. Installing the device into

the rack

Insert the SwitchAir 9U device

at the same U height as the

Cisco switch. Using customer

provided hardware, attach the

air deflector to the rack with

two cage nuts and screws.

Geist SwitchAir Airflow Management Device Installation

Rear rack

uprights Cisco switch

Front rack

uprights

SwitchAir device

To contact Vertiv Technical Support: visit www.VertivCo.com

trademarks or registered trademarks of their respective owners. While every precaution has been taken to ensure accuracy and completeness herein, Vertiv Co. assumes no

responsibility, and disclaims all liability, for damages resulting from use of this information or for any errors or omissions. Specifications are subject to change without notice.

2 VM1191/590-2233-501A