Emerson SRT-12 Bruksanvisning

Emerson Luftfuktare SRT-12

Läs gratis den bruksanvisning för Emerson SRT-12 (2 sidor) i kategorin Luftfuktare. Guiden har ansetts hjälpsam av 23 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 12 recensioner. Har du en fråga om Emerson SRT-12 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

GEIST™ TEMPERATURE SENSOR

Quick Installation Guide

VM1230/590-2250-501A 1

Part Number:

SRT 1.25/4/10

Description

The SRT sensor probe is used to

monitor temperature in critical

environments.

NOTE: The SRT sensor and cable

assembly can span a total cable

distance up to 600 ft from the

Geist environmental monitoring

device.

NOTE: Three sensor sizes are

available. The standard

temperature probe measures 1.25

inches (3.18 cm) in length. The

4-inch (10.16 cm) and 10-inch (25.4

cm) probe options are available for

customers wanting to submerge

these probes in water or glycol for

liquid temperature monitoring.

Installation

1. Mount the temperature sensor

anywhere in the data center

with zip ties or Velcro tape.

2. Plug the uplink cable into the

sensor port (RJ12/ ) of the

Geist environmental monitoring

device or rack PDU.

Once connected, the Geist

environmental monitoring device

automatically detects and identifies

the sensor.

1.25 inches

4 inches

10 inches

Typical Error Curve

GeistTM Temperature Sensors

To contact Vertiv Technical Support: visit www.VertivCo.com

trademarks or registered trademarks of their respective owners. While every precaution has been taken to ensure accuracy and completeness herein, Vertiv Co. assumes no

responsibility, and disclaims all liability, for damages resulting from use of this information or for any errors or omissions. Specifications are subject to change without notice.

2 VM1230/590-2250-501A