EMOS P57002 Bruksanvisning
EMOS
Dörrklocka
P57002
Läs gratis den bruksanvisning för EMOS P57002 (36 sidor) i kategorin Dörrklocka. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 4.5 recensioner. Har du en fråga om EMOS P57002 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/36
3401000020_31-P57002_00_01_WEB 80 × 120 mm
P57002
GB Wired Doorbell
CZ Drátový zvonek
SK Drôtový zvonček
PL Dzwonek przewodowy
HU Vezetékes csengő
SI Žični zvonec
RS|HR|BA|ME Ožičeno zvono na vratima
DE Draht-Türklingel
UA Дротовий дверний дзвоник
RO|MD Sonerie cu r
LT Laidinis durų skambutis
LV Pie vadiem pievienojams durvju zvans
EE Juhtmega uksekell
BG Звънец с кабел
FR Carillon laire
IT Campanello a lo
ES Timbre con cable
NL Bedrade deurbel
www.emos.eu
2
3
3
1a
1b
2
4
1 2
1
2
4
3
3Button switch
N
N
L
L
3
GB | Wired Doorbell
The chime is designed for constant connection to a 230 V AC/50 Hz
power grid.
Read the instruction manual carefully to make sure you use the doorbell
correctly.
Technical Specications
Enclosure: IP20
Number of ringtones: 1
Chime power supply: 230 V AC/50 Hz
Chime Description (see g. 1)
1a – mounting hole/opening for
hanginge
1b – mounting hole
2 – opening for wiring
3 – hole to open the cover
4 – front cover
Mounting the Doorbell (see g. 2)
Connection diagram (see g. 3)
Button switch
Installing the Doorbell
The chime is designed for indoor use only.
The installation may only be performed by an appropriately qualied
person.
During installation, follow applicable standards.
The electrical wiring should use a wire suitable for the specic installa-
tion conditions, with a cross-section of between 0.5 mm and 2.5 mm.
The phase conductor of the electrical wiring must be secured against
short circuits and overload by an appropriate circuit breaker or fuse.
1. Disconnect the source of 230 V AC power supply before installation.
Use a measuring instrument to make sure the wiring is not live.
2. Remove the front cover by inserting a screwdriver through the
openings on the sides.
3. Choose a spot for the doorbell, drill 2 holes matching the spacing of
the mounting holes on the doorbell and insert wall plugs into the wall.
4. Insert cables into the doorbell‘s opening for wiring and mount the
doorbell to the wall with screws.
5. Remove an approximately 1 cm long stretch of insulation from the
end of the cables.
6. Place the cables into the doorbell‘s supply terminals and fasten
them with screws.
7. Replace the front cover.
Produktspecifikationer
| Varumärke: | EMOS |
| Kategori: | Dörrklocka |
| Modell: | P57002 |
Behöver du hjälp?
Om du behöver hjälp med EMOS P57002 ställ en fråga nedan och andra användare kommer att svara dig
Dörrklocka EMOS Manualer
31 December 2025
15 December 2024
15 December 2024
15 December 2024
15 December 2024
15 December 2024
15 December 2024
15 December 2024
15 December 2024
15 December 2024
Dörrklocka Manualer
- Extel
- Axis
- Doro
- Velleman
- Swann
- Sinji
- LSC SmartConnect (Action)
- Silvercrest
- Renkforce
- Profile
- Netatmo
- Oricom
- Jacob Jensen
- Mr Safe
- Heidemann
Nyaste Dörrklocka Manualer
7 April 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
12 Mars 2025
22 Februari 2025
20 Februari 2025
19 Februari 2025
4 Februari 2025